No video
KNX Videoseries - #04 Phyiscal address: The addressing in KNX
Рет қаралды 1,817
![Torben Ledermann [ENG]](http://yt3.ggpht.com/M8t3h09nUDB41E_uyD9uCEOU3UXgGx0xE4aiwLSPN828MQEub79zgJcHVnpJcjyl_pkZeEaROHs=s48-c-k-c0x00ffffff-no-rj)
2 жыл бұрынThis video series is about the KNX bussystem. We will look at what KNX is, how it works and how to program devices with the ETS6.
You don't need your own KNX devices, instead we will use KNX-Virtual to simulate KNX devices. This allows you to program 1:1 what I show in the video.
----------------------------------------------------------------------------------------
My video courses 👨🎓:
▶ KNX / ETS primer: www.udemy.com/...
▶ Modbus primer: www.udemy.com/...
----------------------------------------------------------------------------------------
@NigelCharteris-zg2ug Ай бұрын
Didn't really understand why you dragged the switch actuator up from the line into the area, but I guess I will at some point. Excellent video
Torben Ledermann [ENG]
Рет қаралды 1,2 М.
Torben Ledermann [ENG]
Рет қаралды 1,6 М.
Torben Ledermann [ENG]
Рет қаралды 1,4 М.
Torben Ledermann [ENG]
Рет қаралды 1,1 М.
Torben Ledermann [ENG]
Рет қаралды 1,8 М.
Torben Ledermann [ENG]
Рет қаралды 1,1 М.