Koch Chemie Compounds And Polishes! Now Available In The U.S. Market!

Рет қаралды 66,374

Күн бұрын

Today, we put Koch Chemie Polishes And Compounds through the Apex Detail Review Process! Heavy Cut H9.01
Coarse polishing compound, silicone-oil-free
Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof).
Cut: 9,0
Gloss: 5,0
Koch Chemie H9.01.....www.amazon.com/s?k=Koch+Chemi...
Fine Cut F6.01
Fine polishing compound, silicone-oil-free
Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint.
Cut: 6,0
Gloss: 7,0
Koch Chemie F60.1....www.amazon.com/s?k=Koch+Chemi...
Micro Cut M3.02
Micro polishing compound, silicone-oil-free
Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces.
Cut: 3,2
Gloss: 9,0
Koch ChemieM3.02.....www.amazon.com/s?k=Koch+Chemi...
Also Available here........clean-garage.com/koch-chemie-...
Data sheet and resource page for products by Henry Freeman! docs.google.com/document/u/0/...
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
apexautosurfaceprotection.com
Apex Detail Support Group (FaceBook) / 946245059134747
#kochchemie #apexautodetail #autodetailing

Пікірлер: 163

@aldaley3537 3 жыл бұрын

These products are very impressive. Thanks again for all you do and for sharing your knowledge.

@mikeyp2447 3 жыл бұрын

Thanks for taking time to show us these B! Great showcase!

@seansean8008 3 жыл бұрын

I love your channel. And I have said it before, but those uro pads are my absolute favorite tool in the arsenal ! Thanks for introducing me to them.

@curtisnikel6427 3 жыл бұрын

Thanks Brian, as always a well presented and informative review!

@richardtregonning954 3 жыл бұрын

Outstanding job as always Brian thank you

@williamthomastaggart5080 3 жыл бұрын

Thanks as always Brian.

@eudoc1982 3 жыл бұрын

I've been using this brand for a while since I live in Turkey and i love all their products and I'll love to see them against 3d one. Thank you Brian for all your lovely videos.

@user-qr8eg3hm1d 13 күн бұрын

Hi I'm not a detailer so please forgive my "amazement" at the ability of koch chemise to remove those scratches - wouldn't have believed it possible if I hadn't seen it 🙏🇦🇺

@richsmith3120 3 жыл бұрын

As good as the Sonax line. You just got to love the Germany products.

@lilletizz 3 жыл бұрын

Waay better.

@danlc95 Жыл бұрын

Menzerna has always been good to me!

@jamesbiedlar590 3 жыл бұрын

Great video once again! I will have to try some.

@1stfrompuertorico568 3 жыл бұрын

Amazing to learn about Koch Chemie and proper use.

@MikesAutoDetailing 3 жыл бұрын

Interesting product

@Tops1212 3 жыл бұрын

H9 v ACA500 F6 v 3d one Lets get ready to rumble🥊🥊

@marioskosmidhs9454 3 жыл бұрын

We love them in Europe

@dimmacommunication 3 жыл бұрын

Finally :) Been enjoying my H8.02 for a while now , works a charm

@scottmattern482 3 жыл бұрын

I've been switching to koch chemie myself. Seems like a well produced line with premium performance.

@richsmith3120 3 жыл бұрын

Time for another Compound series. 3D vs Sonax vs Xtreme Solutions vs Koch Chemie

@kingkangjoe 3 жыл бұрын

How do these compare to griots aio?

@richsmith3120 3 жыл бұрын

@@kingkangjoe These are not AIO polishes.

@AmirAbdullah 3 жыл бұрын

@@kingkangjoe the koch line has its M302 with wax in it as a one step type of finishing product. But it’s the M302 it’s the finishing polish so it probably won’t have the cut the Griots product will .

@ptheledge5390 3 жыл бұрын

My go to polishes absolutely love them

@404notfound..... 3 жыл бұрын

Exciting times in the detailing industry! Some very impressive products.

@marksafady5986 3 жыл бұрын

Thought I would see a very impressive at the end. Thanks for the video.

@apexdetail85 3 жыл бұрын

After I have tried ALL of the polishes....maybe.🙂

@matthewgibb2640 3 жыл бұрын

I've been testing these for months. I think they are solvent based but they perform extremely well on single stage paints, thats when I would use them mainly. H9 mixed with F6 is a great combo.

@olgai.menendez9493 3 жыл бұрын

Wow, I really liked that product. I got me some of that microfiber pad I haven’t use it yet. Can’t wait to try it on my friends vehicle!

@jayz313 3 жыл бұрын

Thanks for reviewing these. One thing I've learned from you if you have something that works stick with it. I really enjoy 3D One, and Sonax Perfect Finish, for what I do these cover most of of my needs. Like you taught us, team it up with right pad. I did try a small bottle of the KC M3.02, thought it worked really well, but I give Perfect Finish the edge, for me if needed I can get a little more cut out of PF, and the gloss is amazing. 3D One did a great job creating a product so versitile, and priced right.

@garethshaw5210 3 жыл бұрын

Great video again Brian. Would have liked to have seen the compounds used with the corresponding koch chemie pad though. 👍

@richardseem7948 3 жыл бұрын

amazing video and product review good friend. b well

@MikesAutoDetailing 3 жыл бұрын

Well done informative video

@TheCarDetailingChannel 3 жыл бұрын

I love when companies use that style of bottle and self cleaning cap

@dimmacommunication 3 жыл бұрын

that " self cleaning cap " tends to get stuck tho.

@neilwalker5041 3 жыл бұрын

Great looking group of polishers as there are so many high quality products on the market. You may be busy with another cutting compound contest.

@mattduffy2023 3 жыл бұрын

Wow buddy very impressed with that line up and your indepth knowledge of detailing. Now I know when I go off roading around Pittsburgh to drive it directly to you for paint correction...😆

@apexdetail85 3 жыл бұрын

I am closer to Philly.🙂👍

@MNpicker 3 жыл бұрын

Nice.. definitely gonna try this.. I have been wanting to try it for a long time now but now that it is a lot easier to get here in the US its a no brainer.. Of course we have to have a vid of the heavy cut against Sonax Cutmax👀

@tbird71931 3 жыл бұрын

I'm blown away how well you work that rotary. Mine likes to jump and everything else. But I'm also using a foam pad.

@koyomin4143 3 жыл бұрын

Yea time for another compound series 🙏

@dimmacommunication 3 жыл бұрын

H9 is king of heavy compounds

@Normster32 3 жыл бұрын

Would love to see this again Sonax CutMax . Been a while for a good compound showdown... 🙏

@bigd9848 3 жыл бұрын

First time I seen this brand💎💎

@pgill2682 3 жыл бұрын

Love koch chemie so far! F601 and m302 are awesome

@anthony3953 3 жыл бұрын

Would m302 be good if My paint is in great condition but want to polish before adding protection ?

@owensteele1274 3 жыл бұрын

Would be fantastic to see how the H9.01 fares on the cutting compound podium. It will be well up there I'm sure. This range is amazing.

@amazingvloger3562 3 жыл бұрын

Thanks for making the vedio.please make a vedio of h9 vs rest compounds.specialy vs fast correcting cream and angel wax

@enda835 3 жыл бұрын

I’ve been using Koch products for about a year now and have yet to find a bad item. The glass cleaner is excellent.

@jeremys8360 3 жыл бұрын

Can’t wait for the cleaners to be readily available

@GSP-76 3 жыл бұрын

Koch Chemie is as good as it gets in the compound/polish arena. I used Jescar correcting compound religiously for a long time until I tried Koch Chemie...their products are fantastic and worth every penny.

@danlc95 Жыл бұрын

I actually though Jescar out performed Koch in every division. I was really disappointed in KC. I was expecting game changing results based on the hype.

@jamescarter7663 3 жыл бұрын

Brilliant video and my thanks go out to you. What do you think of F6 to be used as a one step on a Mercedes with only very light marring with Chemical guys free hex logic pads with a DA? Would love to hear your thoughts.

@donschultz7759 Жыл бұрын

Hey Brian awesome video. My question for ya. the P3.01 is for the paint enhancement side correct? Just wondering

@captrans 3 жыл бұрын

Good stuff been using few weeks I get mild dusting on the red and harder wipe offs it seems compared to other out there. Angelwax wipes easier Pads are good. Red pad seems to sling alot at first due to very open cell. I found both pads prevent sling if you apply closer to center of hole

@danlc95 Жыл бұрын

Red didn't cut as much as I was expecting either.

@larryisaac8988 3 жыл бұрын

Hi Brian, i've started my detailing business and im learning a lot from you. Thank you very much. Recently i purchased a Rupes Mille gear driven polisher. I hope you can make comparison of Koch Chemie H9,M3o2 vs Rupes Coarse, Fine compound and polisher, both claim of longer work time and lubrication. Thank you ahead.

@NinaBabyTV 3 жыл бұрын

Sir, you are the KING of Details. I will drive up to your shop one day, that is a must. Brian btw, what about rock chips in a situation like this video? Do they need to be filled in first? I am so tempted to even try an enhancement/polish by hand.

@apexdetail85 3 жыл бұрын

Rock chips are filled in as well. They are filled in after the correction here. We dont want to risk pulling out the OEM paint during correction. You are welcome to drop by anytime.

@MarcoRotax 3 жыл бұрын

Little tip, H9 underperform in cold situation like 10°celsius or less, better move into something else. M3 is super, i love it.

@davideisenberg9844 3 жыл бұрын

Hi Brian.. Would love to see a video comparing Chemi 901, 3D400 and Sonax Cutmax. I've been experimenting with 3D and Sonax. Depends on paint, clear etc but both work really well. Wondering of the Chemi 9o1 is any better? Always looking for the ultimate in all one products and heavy cutting compounds.

@hlfbrwnhlfamzng 3 жыл бұрын

Love your videos, need some advice for a white 2010 acura mdx. The front and rear bumper is yellowing. Ive tried stoner bug n tar remover, meguair's heavy wheel cleaner, claying, hd one and sonax polish with no sucess. It doesnt feel like traffic film so i assume its a clearcoat issue

@apexdetail85 3 жыл бұрын

You will need a re spray on the bumpers. Color coat and clear coat.

@FABAutomotiveDetailing 3 жыл бұрын

Does this mean I will be seeing you again in just a few weeks? I have used a few of these and really like them. The pads are interesting and seem to work well.

@apexdetail85 3 жыл бұрын

I cannot make it...unfortunately. Let me know how it goes.🙂

@FABAutomotiveDetailing 3 жыл бұрын

@@apexdetail85 Darn it man I was hoping to chat with you! I will let you know!

@chrismurphy783 3 жыл бұрын

I would like to see how H9 would compare to the podium compounds. Also, how would the F6 compare with 3D One?

@jasoncraig7096 3 жыл бұрын

I will second that comment!!!! Bring on the battle!!!

@AmirAbdullah 3 жыл бұрын

I third this as well.

@jtm1979 3 жыл бұрын

Me too. Also new Rupes da coarse compound. And Gyeon Compound+

@MelodiaBlasku 3 жыл бұрын

Koch vs sonax vs rupes - i would like to See this comparsion too 👍

@gleamcardetails 3 жыл бұрын

They work well also with Scholl pads

@fuuks8 3 жыл бұрын

Can you make a video of the pads and compounds polish? To see the full results of the combo

@alanwallace3253 3 жыл бұрын

I’m not a product junkie but I’d agree they were impressive. I’ll have to compare $$ to Sonax. It’s tough to change when you have a line up that gives you results.

@charliebradley4269 3 жыл бұрын

Hi. What pad size would you say for a 5” backing plate? The 126mm or the 150mm ? Thanks. Keep up the great work.

@alanwallace3253 3 жыл бұрын

Brian that rotary looked like the maxshine 550. If I’m right do you have any issues with machine heating up after a couple of panels.

@johnmbell4642 3 жыл бұрын

Hey Brian, this Mic sounds better than the last Mic but the mic in the closing segment sounds the best but these two mics are very very close and either one would be about the same. That K.C. Is interesting stuff Matt really likes their car soap maybe you could give that a try isometime see what you think have a good one🇺🇸👍

@apexdetail85 3 жыл бұрын

Thank you for the feed back. Much appreciated.

@dunzoautomotivedetailing992 3 жыл бұрын

Hello Brian, love your videos! Always very informative. Can I have an email where I can ask you a question please. Thank you for all you do for us!

@apexdetail85 3 жыл бұрын

sure....miragebjs@yahoo.com

@norcalspitshine9067 3 жыл бұрын

I've been debating on getting that system. Every time I do that I'm always fall back to 3d aca 500 and 3d one how do they compare.

@stuartkipp6533 3 жыл бұрын

Great video! I'd like to see H9 v S3 gold xxl v ACA500

@AnasDrifter 3 жыл бұрын

Yes plz

@TKsw191145 3 жыл бұрын

What’s your favorite polishes and pads for your day to day work Brian?

@theoneslim1676 10 ай бұрын

Brian it’s only right to see where their cutting compound sits on the food chain. I want to see it go head to head against the Sonax cut max and the Jescar correcting compound

@automedicphx6762 2 жыл бұрын

Which Kock Chemie would you recommend for a one step before ceramic coating.

@jeremys8360 3 жыл бұрын

Also, quick question, can you use any liquid wax to correct? Something like meguiars ultimate liquid wax and a microfiber pad. Thinking of getting slight correction out of a wax application. Or maybe exfoliation with the pad and bonding with the chemical

@apexdetail85 3 жыл бұрын

Sure...you could correct with body moisturizer. The pad does most of the work.

@konradsmorawski7941 2 жыл бұрын

While using M2.01 do I need to protect rubber sealings (etc. around windows) with 3m tape or can I save this and this compound can be wiped-out without cleaning like at Sonax compounds?

@Legolas6911 3 жыл бұрын

Great video. How do you compare them to Gyeon compounds and polishes?

@jkroemer2685 3 жыл бұрын

The Gyeon are dusty compared to these and K.C overall out performs them is most aspects...cut/finish especially.

@bobit8742 3 жыл бұрын

Let see it cut against sonax ultimate and finish against perfect finish 😃 cheers

@MUJHOOL 3 жыл бұрын

*hi, I've very new to this, I've bought the claybar and lubricant then the KC302 which pads do I need for the kc302*

@josejpadilla5928 2 жыл бұрын

Would that H9 work on removing a professional grade ceramic coating?

@eamonmcgowan4707 3 жыл бұрын

Like all Pro's at the very top of their game...high dive, golfer, race car, you make it look sooo eazzzy! I would like to see this against your fav the 3D line. Thank you. encinovillageyo

@Nade375 3 жыл бұрын

Have you had the pleasure of working with any of the QP-ON pro series products yet? Was thinking of replacing my bottles of the standard series with the pro since they are almost empty now but am looking for some input first.

@apexdetail85 3 жыл бұрын

Not the new ones...not yet. On my list.

@jayhughes6512 3 жыл бұрын

What pad would you recommend for a Ford focus st paint

@paulbaimbridge393 3 жыл бұрын

Could you review the Sudzbox product line?

@asamasam8708 3 жыл бұрын

Hi, would like to get your expert opinion that Which one is better cutting compound , Koch Chemie h9.01 or Carpro Ultracut.

@deepclean5335 2 жыл бұрын

What your preferences sonax fast finish or rupes uno protec. Thanks

@albertvelez6386 2 жыл бұрын

can I follow up with m3 if I use the f6 along with the corresponding pads?

@the_Real_R3x 3 жыл бұрын

I am on the Facebook group as well as here. What is your go get it now rating for cutting compound?

@autoinfinitydetailing8382 3 жыл бұрын

Please do a video on 1K Nano

@karlchapman6768 Жыл бұрын

Hi, what pads would you recommend on 2019 Volkswagen clear coat? The recommended Koch Chemie pads, microfibre or Lake country pads please?

@sergiobarraza1806 3 жыл бұрын

Thought you would run the contest on harsh sand marks as others. From 3k to 800 grit. Anyways Koch chemie its good, very similar in dust control as Sonax but lacks a little of cut power. Greetings Bryan

@apexdetail85 3 жыл бұрын

Saving that when I put it up against 3D and Sonax

@michaeldeluca9306 3 жыл бұрын

Brian, what’s your go to rim and tire cleaner? Time to re-stock. Thank you.

@apexdetail85 3 жыл бұрын

Bilt Hamber Wheel does a great job at both....clean-garage.com/bilt-hamber-auto-wheel-1-liter-33-8oz-non-acid-wheel-rim-cleaner/

@hberglions9046 2 жыл бұрын

Do you like it better than 3D one?

@thomashansen3875 3 жыл бұрын

KC Polish Compound and Sonax are the best

@richardscogin6906 3 жыл бұрын

Why are you not using their pads ??? Ok you answered that question at the end Thank you. Because of some of your videos I ordered $480 of products form Xtreeme Thanks for the 10% off that was nice . 496 I will use on my new C8 before PPF and I know you do not like PPF but I do not have your talent with pain and I will track my car . I also have 403 for my challenger its white .

@salmanslim Жыл бұрын

Can i use m302 on a new vehicle as a onestep without protection? And then apply a sealant after that?

@user-vq9sl8jx4y 4 ай бұрын

Do you use the Koch chemie pads too

@mikeparker9812 3 жыл бұрын

Ive got the H8 to use up but have opted for the Angelwax line. How do you think they compare?

@apexdetail85 3 жыл бұрын

You can be successful using either. Add 3D and you have some top shelf polishes.

@jmbo.mailbox 3 жыл бұрын

Can you compare with Carpro Ultracut vs Koch Chemie H901. Thanks

@hakman239 3 жыл бұрын

Yh please put h9 in the cutting compound series h9 supposed to be able to remove p1000 sand marks on a wool pad

@MrFishy-te8of 3 жыл бұрын

Hi sir brayn i need help with pad selection for cutting and finishing on white and black cars it will highly appreciated...

@pashagora773 2 жыл бұрын

What kind of buffing machine are you using?

@xianreiss 2 жыл бұрын

What would be the "right pad" with the F6-01?

@stephenbissett3280 3 жыл бұрын

Better than Sonax Perfect Finish?

@declanflaherty8958 3 жыл бұрын

how would you compare these against the 3D Aca 500 and 3D one? Have you tried Scholls Concept polishes? Any comparison ?

@apexdetail85 3 жыл бұрын

3D has some very aggressive polishes. other than that...you can be very successful using either.

@aldosainz3253 3 жыл бұрын

👍👍👍👍👍💯💯💯💯

@lifeofbrian9511 3 жыл бұрын

I would like to see it up against 3D ACA and Sonax.

@speedtiktokclips Жыл бұрын

Yes

@Durtyrags 3 жыл бұрын

What were the final podeum finishers for the cutting compounds?

@apexdetail85 3 жыл бұрын

3D ACA 500, 3D AAT 501, and Sonax

@kimnewling5728 3 жыл бұрын

Would you recommend M302 with Uro microfiber pad on soft Honda clearcoat?

@AmirAbdullah 3 жыл бұрын

As long as you clean the pad a lot it’ll work. Have several on hand as well. I’ve done this.

@kimnewling5728 3 жыл бұрын

@@AmirAbdullah thanks!!

@apexdetail85 3 жыл бұрын

You may need to finish that with a soft foam pad.

@seancolon9890 3 жыл бұрын

would this polish finish down better then M205 for a clearer finish?

@apexdetail85 3 жыл бұрын

I am not a huge fan of Megs polishes for the most part...So I would say yes.

@Pedroluvslupe 3 жыл бұрын

There is a video in the past that I can’t find it’s about a product a polisher or compound that remove swirls and scratches but not so aggressive for clearcoat can you help me remember please

@apexdetail85 3 жыл бұрын

3D One and a Urofiber pad.

@Pedroluvslupe 3 жыл бұрын

@@apexdetail85 3d from extreme solutions .?

@Pedroluvslupe 3 жыл бұрын

@@apexdetail85 I need something strong enough to remove swirls and scratches without wearing down the clearcoat very much

@hakman239 3 жыл бұрын

I thought they where rated 9 max m3.02 is gloss 9 h9 is gloss 5 I use h9 as a one step it’s very glossy