Awesome!! I'm going to take a shot in the dark and assume that this drive system will be outside of my budget.

Same problem hydraulics always have, power consumption. In other words, you don't get out what you put in so you need to have a reason to accept the loss of efficiency. Jet was great on my river boat in Alaska when the rocks would turn a prop into a cone shape before you could open a beer.

Brilliantly delivered good sir. An amazing product as well. Not often that one is impressed with commercials.

Its possible to see the much energy loss in the thrust to propell the vessel forward in this case which could be enough to power Electricity generating turbines

Nice to have a single motor fishing boat/ski boat.

Expensive asf, but damn kool!👍

I was waiting for info on the intake and what steps were taken to minimize debris from getting sucked in, and how the system deals with what does make it in.

I think these kind of designs can be optimized for use with coal and wood, or would work more efficiently with conventional fuel, with a better turbine, and an internal recycling mechanism to get extra efficiency out of burning solid fuels And a steam pressure system would also act as a cooling system for the combustion cycle, and also provide steam pressure for the turbine... So a solid fuel - steam turbine jet motor This is more like an aircraft jet engine, with an opening that could either just shoot flames out of it, or a propeller could be attached and it would work like a regular propeller, propelled by internal combustion. The fire/hot gas jet is probably most robust, it just needs a pressure sensor to make sure water doesn't flood the combustion chamber on start up, and while idling. As soon as the turbine starts, water would leave the chamber, and any remnants would become steam The interior turbine would just sit in ball bearings, and have a variable nozzle high pressure steam jet instead of gears, to spin the turbine. Like a Turbo on a car. That way you get more degrees of travel than with a gear teeth system. It's like basically free-floating. And the smaller the hole size of the steam inlet, the higher PSI of the torque converter, and therefore more turbine speed, and more thrust. Also, more heat from more fuel being burned would increase steam psi, and also create more torque/rpms/thrust proportional to heat being produced. (Thermodynamics, Conservation of Energy) Then, the steam would be condensed to water and re-used, after actuation of the turbine.

Hamilton jet is the way to go

waterjet is a simple water pump.In 1993 Learjet special projects team tested a boat able to reach near MACH1 with a payload of 10.000 tons.We are 30 years later today and nobody is coming near this ship

If you were worried about propellers, now you've got to worry about your skin being taken off your bones.

I don't know... Thunderchild doesn't have them.

Propulsion is always be superior as compare to water on earth,but coming electric propulsion will be a benchmark in water may be.

1:01 I was just thinking about a water jet propeller fitted with a mhd parietal accelerator, added to the turbine or completely replacing it...

Any chance you guys could design a compact setup to retro fit inside a pontoon log???

I like the automated steering. Can it be in interfaced with a foward bow thruster for map navigation? At trolling speeds?

can we incorporate this technology onto a fishing boat?

which software was used for this ship simulation? Can I get the link?

Hi, I worked on a passager ship this last summer that had waterjets, I´m editing the clip and I was wondering if I could use bits of your clip to add to mine?

All designed in New Zealand back in the 50s thanks to Bill Hamilton

👍👍👍👍👍👍👍👍....great

how does it handle a kelp field.?

Nice!

So how would these go launching at the boat ramp?..

This commercial tells interesting things about targeted customer base. It seems like your ideal customer does not want any specific information, is completely content with buzz words and is ready to overpay several times for a shiny product.

We have new capacitors over 8 W a kilogram No more hard, switching inverter technology we have solar dilation. We have to add minerals for drinking water or green light desolation of a work with more products than I can think of look up the most futuristic catamaran

Reduced risk of water spills; increased risk of water leaks.

Can a Water Jet Ship run slowly and quietly as many as possible level?

We used kongsberg in our simulator.

Why are they not submerged in the water?

access to clean propulsion blades? water intake?

Propellers hurt sea animals. Water jets seem safer.

is that david ike

Expensive asf, but damn kool!

Wow.. amazing it speed boat..

final destination will have new scene idea

Since only the inlet is underwater, shouldn't this be called a water vacuum?

Very beautiful 😍

But why ships manufacturers haven’t use this engines yet?

How much does it weigh? Dimensions?

lho yo amazing misterbro cool sukses with engine jet how many purpose for turbin and gas

👍👍👍❤️❤️

' what country make this waterjet

' are both jets same spins or opposite spins... not important about low currencys in this above

и нафига водомет на глубине?

You guys missed the opportunity to name the engine KameHaMeHa

High propulsion guns water guns which knock people over but don't harm them makes more sense hydrogen guns they don't kill but they are effective and what they do

OMG

Just looks like an impeller to me.

So it’s a fancy jet boat ? Sweet I own a way cheaper model single Berkeley with a Chevy 454 big flat bottom river boat I live in AK

Wow

If I had this, I could catch a fish

Surface drives are more controllable and have real reverse

,👍👍👍🤗👍👍👍😀

Buat perumahan bakal hancur gk tu rumahnya😀

Mantap mantap

What a CGI instead of real footage...

i can go from 100 to a zero real quick

Jet drives are very inefficient. Just sayin...

take your thing out of the waterjet. I DONT CARE IF IT FITS!

This will not be works.

the only possible future of boats is sailing boats

Sounds like they would be great if they were real. Too bad they only exist as a computer simulation.

Would you recommend some material for costom single engine sport fish express with the very large cat c32 😁🏴‍☠️🥸 I plan to do some Floyd wright design stuff in boats.and I know it takes this industrius quality. Cat can only recommend some private local enterprises that are more geared for a compromise quality. I want top notch.

Awesome!! I'm going to take a shot in the dark and assume that this drive system will be outside of my budget.

Nice to have a single motor fishing boat/ski boat.

Its possible to see the much energy loss in the thrust to propell the vessel forward in this case which could be enough to power Electricity generating turbines