THIS IS BY FAR the very best "information" I have seen regarding the Jeep WK and oversized tires. Everyplace else on the internet (ie: forums) tell you to go to a really high lift and I have always hated that idea. I have the 2006 5.7L Limited with the stock front & rear E Lockers and I love it! I'm not one of those people that needs a thousand mods but I have been looking into this exact setup (rocky road 2.5 + bilstein 5100s). I liked this video so I can refer back to it later when I purchase the lift and tires.
@Kordare5 жыл бұрын
I felt the same way, I love the height mine sits and didnt want to change it to run bigger tires. I'm glad I could help!
@shiphteey2 жыл бұрын
No annoying music. No annoying voice. Keep it up.
@Kordare2 жыл бұрын
Thanks for checking it out 🤘
@joshuamoore24_72 жыл бұрын
Thanks for showing what it is like with that area cut away. This is the first video I have seen of that area cut off.
@quentins56926 жыл бұрын
This man just achieved Chevy truck figment on a WK. Slow clap it out people....
@MarkHumphreysChannel6 жыл бұрын
I've also got a hemi grand cherokee. I absolutely love it. This video gives me so much inspiration.
@xmo5524 жыл бұрын
Oh you're the guy I watched do a bolt on wide body a few months back. Small world. 👍😉
@Kordare4 жыл бұрын
Yuuup🤘
@xmo5524 жыл бұрын
@@Kordare I liked the outside the box thinking and execution on that Mustang.
@Kordare4 жыл бұрын
@@xmo552 thanks it was fun to try something new 🙌
@717UT4 жыл бұрын
I love this video and your Jeep. You do a great job showing your process. People need to realize you can run a lot of rubber if they're willing to do some research and work. Thanks for inspiring me to put more custom work into my Jeep.
@Kordare4 жыл бұрын
Thank you for the kind words, and I'm glad I could help. With some time and effort anything is possible. Good luck with your Jeep!
@717UT4 жыл бұрын
@@Kordare You're welcome. Any hints for welding on these unibody Jeeps? I personally don't own a welder or a shop but I have friends that do. Someday I'd like to take some time and tinker with all the fenders. Maybe even the metal behind like you did. Next set of tires I'd like to step up another size.
@Kordare4 жыл бұрын
@@717UT I just used mig on this, but in general the best thing you can do is make sure everything is clean before you start to weld. Hardest part is getting rid of all the paint. Also you need to watch out for starting fires with the sound insulation inside the unibody.
@717UT4 жыл бұрын
@@Kordare Thank you
@team_suv77784 жыл бұрын
Max Federle o yea man his Jeep is awesome looking I had an 04 grand Cherokee WJ and I had a 2 inch budget boost on it with 35s every forum I read said it couldn’t be done but with a little cutting a moving some metal I had the only one around
@barillasayala4 жыл бұрын
Mennnn...i wish my jeep looked that cool!!!!
@Kordare4 жыл бұрын
🙌🙌
@RevereOverland6 жыл бұрын
I must be missing something... I have the OME lift and I can only fit 32s. Even then I had to do the pinch weld and rear fender fold.
@Kordare6 жыл бұрын
I also have the bilstein 5100 shocks which raised the front an extra 3/4", then also modified the rear spacer to add an extra inch. I explain it at the beginning of this video.
@RevereOverland6 жыл бұрын
Thanks! That's crazy that the extra inch front and rear with some light cutting allows you to have such a large tire.
@Kordare5 жыл бұрын
@@ubermac85 this vehicle specifically doesn't have much room at all behind the front wheels so unless you want to lift it 6" and still only have 31's, you'll need to cut or modify something.
@bradlyevans8624 жыл бұрын
@@Kordare so question..stock spring,with the budget 3in lift(added more in rear)..question comes what model shock(length) of the bilstien 5100?
@Kordare4 жыл бұрын
@@bradlyevans862 dont remember specifically but the ones that are made to fit the wk
@DS-tm9gf6 жыл бұрын
u should weld in a triangular piece between the plate u installed and the part u left hanging down to keep crud out, nice job tho
@Kordare6 жыл бұрын
Yeah I had the same thought, thanks!
@paladin11C403 жыл бұрын
I just bought an 05 GC Limited with Hemi and 66k miles, it looks new. I plan to lift it and put some bigger tires on.
@Kordare3 жыл бұрын
Awesome I need to build one of those next
@hadeslmao88663 жыл бұрын
Jealous, I got a 05 GC too but she’s only a 4.7 with 170k but I plan on hemi swapping her
@cruzzindodge3 жыл бұрын
I know this is old but I put the same tires on my ram sport... can't go wrong with nittos ive had mud grapplers, trail grapplers, and now the ridge grapplers and I love them!
@Kordare3 жыл бұрын
Yes I have been very pleased with the ridge grapplers!
@erickmcguire41946 жыл бұрын
No problem until you get anywhere offroad I thought you had something going but 1 root or off camber crawl will eat the tire off still
@Kordare6 жыл бұрын
It's definitely not perfect but a huge improvement over what I was dealing with previously.
@Kordare5 жыл бұрын
Please see my latest upload, no rubbing with some high speed offroading.
@conorkennedy4055 жыл бұрын
Damn now I wanna do this to my 05 Grand Cherokee with the Hemi. So much hope now😂
@jaisonslayer14943 жыл бұрын
Yeah man I have a 2005 wk and I have a 3 inch block lift and 33/12.50r18s on it and it only minor runs
@blainetrevino6893 жыл бұрын
This makes me sad bc I had a 2006 with a hemi before my wreck and now I have 2008 with the v6 and not as good Bc of where the one I have now is from
@danvroom9993 жыл бұрын
Jaison Slayer14 do you got pics of your setup??
@ShiftedPerspective6 жыл бұрын
Dang 35s. I have Nitto Terra Grapplers and love them. Yours are legit tho.
@33valleys285 жыл бұрын
your shop is brand new. your lift is brand new ... damn bro
@Kordare5 жыл бұрын
You're not wrong
@33valleys285 жыл бұрын
@@Kordare by doing what?
@Kordare5 жыл бұрын
@@33valleys28 hard work and patience
@crafty29782 жыл бұрын
Nice jeep . My 2007 3.0 jeep got a Rocky road lift also and my front end turned out higher than the rear now i need to lift the rear up more
@mickey-qu7tk5 жыл бұрын
That's bad ass I got a 05 cherokee 4x4 love jeeps
@Kordare5 жыл бұрын
Thanks man🤘
@805gregg3 жыл бұрын
It's funny everyone wants the largest tires they can squeeze on their 4X4, but I saw a great viedo from "The Road Choose Me" and he traveled around Africa for 54,000 miles on 32.5 tires and had no problems
@karlgustav54903 ай бұрын
it's called american badass syndrome 🙄
@2real4tv706 жыл бұрын
Thanks for the vid and dope Jeep man!
@joshuamoore24_72 жыл бұрын
If you go off roading up to Four Peaks on the dirt road off of the I-87 in Arizona, those tires would rubbing over the uneven dirt road because of wash boards and boulders somewhat due the articulation and movement of the truck compared to the tires and fender well gaps being small.
@MsJamesnorton Жыл бұрын
U really did 😂nothing 😂
@Kordare Жыл бұрын
Ha well this took like 12 hours to do so I feel like I did something
@johnvineyard675 жыл бұрын
thinkn you shoulda cut higher.. for wheel travel going up.. looks like you just fixt it for static turning,,,
@Kordare5 жыл бұрын
Yeah probably could go a bit higher, but after doing some offroading I didnt notice any rubbing
@iutufis6 жыл бұрын
Any off road use man? How is the rubbing if you're driving over rock?
@frankfitzpatrick53006 жыл бұрын
Bilstein's were an EXCELLENT CHOICE. Good job on the fab. work But does it make contact during FULL ARTICULATION of the front I.R.S front Suspension ?
@Kordare6 жыл бұрын
I haven't done too much hard offroading since doing this, but with the little I have done, I haven't noticed any rubbing. I'm planning to do some more testing soon.
@BB6Teardrop Жыл бұрын
Definitely is gonna hit on the trails
@Kordare Жыл бұрын
Yeah but it's waaaaay better. These days I'm only at full lock while parking so it's fine
@sigsig19185 жыл бұрын
cool setup man
@Kordare5 жыл бұрын
Thanks!
@steveward52624 жыл бұрын
amazing video and fab . legend!!
@Kordare4 жыл бұрын
Thanks🙌
@weldon7575 жыл бұрын
That's insane yo
@marshallreede55775 жыл бұрын
Nice. Wouldn't mind getting my Hemi Limited Commander looking that way.
@Kordare5 жыл бұрын
Do it!
@marshallreede55775 жыл бұрын
@@Kordare definitely in the works man...trying to figure out how to get most lift for the cheapest price lol. What's yours consist of???
@Kordare5 жыл бұрын
@@marshallreede5577 mine is basically just spacer blocks but I also did new struts all around. Stock springs.
@marshallreede55775 жыл бұрын
@@Kordare right on. Appreciate the reply.
@Kordare5 жыл бұрын
@@marshallreede5577 anytime man!
@Brian-fw6ml4 жыл бұрын
that is crazy shiny clean floor in a garage.....
@Kordare4 жыл бұрын
It was brand new in this video
@mavallarino3 жыл бұрын
Need to smooth that. On a pitched turn (suspension compressed) the tires will still rub. Furthermore, if it isn’t completely smooth in the well the imperfections and edges will slice and grind the rubber.
@Kordare3 жыл бұрын
Yeah this definitely isnt gonna solve all rubbing but I was mainly concerned about when I go full lock when parking or turning around, at which point suspension isn't compressed. Also when it does rub it hits right on the smooth surface so it doesn't chew up the tire.
@arielcardenas21104 жыл бұрын
Friend, I want to know how you did it or what I should do so that my great Cherokee looks like yours with those tires
@ClarkReviews5 жыл бұрын
i run 5100 bilsteins at 2" and even my 31's rub sometimes while turning
@Kordare5 жыл бұрын
Yeah it's hard to fit anything bigger at all without doing something about that pinch weld.
@PreparedOverlander Жыл бұрын
I have a 2005 WK Limited with the Hemi. I used a Old Man Emu lift and the Rocky Road leveling kit. I currently have 265/70 tires on the stock rims, but I do get some rubbing when I turn under power, not sure what is causing it, I cant see any place in the fender well. I am planning to put rims from a Rubicon Wrangler/Gladiator next year. I am not very good in the shop, so cutting up my Jeep would not be a great idea. I do like your WK, keep up the great videos
@Kordare Жыл бұрын
Look up doing the pinch weld mod, it is pretty simple and will solve your issue. Good luck and thank you!
@PreparedOverlander Жыл бұрын
@@KordareI have already done that. The rubbing dont stop me from driving it, its just annoying that I cant find where its comes from.
@boomersooner96006 жыл бұрын
2010 wk, no lift, no aftermarket shocks and all body's , running 35's, twin turbo and no problems turning or rubbing.
@Kordare6 жыл бұрын
ha what? You cant even fit 31's on a wk without a lift
@boomersooner96006 жыл бұрын
@@Kordare haha...yeah they do fit. And if you like send me a number or an email and I'll send you pic of my jeep sitting outside right now.
@Kordare6 жыл бұрын
joey@jshoe.org
@Kordare6 жыл бұрын
Looks sweet! But I don't understand how you can get to full lock without hitting the pinch weld...
@boomersooner96006 жыл бұрын
2 inch wheel spacers, the inner fender liner is taken out and re done and the pinch mod alot of people do is done, but I tore out alot more metal than most do. Also trimmed the front bumper , heated the fenders and rolled them out.
@joshuamoore24_72 жыл бұрын
A 10"--12" lift is need with that big of tires.
@Kordare2 жыл бұрын
Haha that amount of lift is physically impossible on this platform unless you rebuild literally everything
@marvingiron90265 жыл бұрын
I have an 05 wk hemi on a superlift 4” inch with 33s all around!!
@Kordare5 жыл бұрын
Sikk!!!
@marvingiron90265 жыл бұрын
Kordare thanks brotha!! Love the roof rack tho been wanting to get one bad!
@Kordare5 жыл бұрын
@@marvingiron9026 thanks!
@joshuamoore24_72 жыл бұрын
I think I would have hacked a straight angle and cut off a bigger chunk and welded a flat plate in, and primered and painted it.
@AyyItsJk4 жыл бұрын
Sorry to comment on this so late but with pinch weld mod and a 3" lift I can run 35s?
@Kordare4 жыл бұрын
You won't be able to turn fully with anything more than 32s. You'll have to do what I did in this video to fit anything larger
@uNabL34 жыл бұрын
Makes me wonder, how does the process differ for WJs? :) Thanks for the video!
@Kordare4 жыл бұрын
Probably would be similar but I've never worked on a wj so I can't say for sure.
@bradlyevans8624 жыл бұрын
Wj are straight axle..same but more simple
@xmo5524 жыл бұрын
Just cut more. Our WJs have dinky wheel wells. 😩
@favian45274 жыл бұрын
@ kordare so you have the bilstein shocks and a 3in strut space on top? Also what lift setting did you set the bilstein shocks to? And do you think I could set the bilstein shocks to 1in and use strut 3in spacers to achieve 4inches of lift in total?
@Kordare4 жыл бұрын
Hey I have the bilstein shocks set to 3/4" lift and a 2.25 inch spacer on top. I wouldn't go much more than 3 inch total lift without changing more suspension components because the geometry will be way off for stock control arms, etc.
@favian45274 жыл бұрын
Kordare thanks appreciate the help
@Kordare4 жыл бұрын
@@favian4527 anytime, good luck!
@isaacruan88244 жыл бұрын
Kordare, I have the bilstien 5100 on my jeep, but did you setup the shock to sit on 2.5 in lift or you left the o-ring to the last placement
@littlenobody4245 жыл бұрын
Wen u took the muffler out but kept the cats, does it still pass emissions???
@Kordare5 жыл бұрын
Yes it does.
@JT-ii8wo5 жыл бұрын
Mufflers have nothing to do with emissions... they are only there to help with back pressure during the exhaust cycle of the engine...
@littlenobody4245 жыл бұрын
Cool, thanks fellas. 1luv
@gurnblanstein98164 жыл бұрын
Looks good, as long as you stick to mall parking lots...
@Kordare4 жыл бұрын
Hahaha nope I live in the middle of a forest
@juancarraballo97313 жыл бұрын
nice video men thanx 💯 & quick question what's the biggest size tire that i can fit on the factory wheels ? btw the factory size is 235/65r/17. with that in mind i was thinking on like a 245 or 255 not sure yet what can i fit & keep it looking like factory without lifting yet. any suggestions men ?
@Kordare3 жыл бұрын
I did 265/70/17 with stock wheels but I had a 2 inch lift and did the pinch weld mod
@Mark-wp4lw3 жыл бұрын
Nice work bud but all that work on a 3.7? You'd have really liked the 5.7 with Quadra-Drive 2
@Kordare3 жыл бұрын
This is a 4.7 and yeah I'll probably build a 5.7 soon
@tjduskey28895 жыл бұрын
Beautiful Jeep. What is your wheel offset?
@Kordare5 жыл бұрын
Honestly dont remember, but the wheels are pro comp 17x9, standard offset. I also do have 1 inch spacers.
@IWNTYU3 жыл бұрын
How many of you told your head to the left to take a better look at where it ribs in the front 😆 I did 🤣
@bryandavid93483 жыл бұрын
Hey man! Sorry to add to all the darn tire ?s but I have about 3.5" lift , 23.5" front and 24.5" rear, and I'm looking to possibly get some 295/70/17 tires (33ish") . My wheels are 17x9 with 4.75" backspace. I know I'll have to do the pinch weld, but other then that, I'm guessing I shouldn't have to many problems fitting these, right ?
@Kordare3 жыл бұрын
Definitely need to do the pinch weld but otherwise you should be okay
@marcindonica34886 жыл бұрын
That thing is a beast! Have you tried flex?
@marcindonica34886 жыл бұрын
Joey Shoe I have similar ideas. Can't wait pt.2 😀
@petar4433 жыл бұрын
Is there avaliable good torsen differential for these Jeeps(WK) .I must order specially from USA. I'm from Europe here we drive 3000cc CRD diesel :) Cheers
@weldon7575 жыл бұрын
I like it 😏😏
@Kordare5 жыл бұрын
Thanks 🤘
@ryanbarstad53303 жыл бұрын
So if I am understanding this correctly all you have is spacers for the lift to get the 35s?
@Kordare3 жыл бұрын
Yeah and I have bilstein 5100 shocks which lift another 3/4" in front so I'm lifted 3 inches all around
@dangerousfreedom49653 жыл бұрын
35’s?
@Kordare3 жыл бұрын
Watch the end of the video, I describe the sizes I tested
@dangerousfreedom49653 жыл бұрын
@@Kordare Thank you
@HooodTv3 жыл бұрын
U think I can fit 285/75/R16 on a 2007 Jeep WK with a 2” old man emu lift?
@Kordare3 жыл бұрын
You'll definitely need to at least do the basic pinch weld mod, even then you may still rub
@HooodTv3 жыл бұрын
@@Kordare thank you. What’s the biggest mud tire I could fit on a 2.5 inch lift? With the pitch fold
@Kordare3 жыл бұрын
@@HooodTv normally 265/70 to still get full steering lock
@HooodTv3 жыл бұрын
@@Kordare on a 16 or 17 inch rim? Sorry to bother you but you have like the most knowledge in here when it comes to WK Jeep’s lol. What do you think of this lift kit? www.streetrays.com/sr-usa-steel-lift-level-kit-for-jeep-grand-cherokee-wk-commander-3quot-2005-2010.html
@moiseconcha53283 жыл бұрын
Can it be 16 "is the smallest measure or only 17 minimum?
@shanew.8784 Жыл бұрын
Clearing on flat ground barely, rubbing still for sure with any articulation
@Kordare Жыл бұрын
Either way 100 times better than it was. I'm really only at full lock while parking, on flat ground.
@AceGotGame5 жыл бұрын
What kind of lift do you have in it I have a 3" lift kit and I want to get 33 but I don't want to cut anything do you think it was
@Kordare5 жыл бұрын
I'm lifted 3 inches all around so you'll def need to cut stuff to get full steering lock
@evall4104 жыл бұрын
Did you end up doing 33's? How did the pinch weld go
@makingitmatters95873 жыл бұрын
Is this the same jeep that was totaled and that you tied to a tree?
@Kordare3 жыл бұрын
Yuuuuup
@MrDOA3135 жыл бұрын
How much of a spacer would I need to run to clear the front 295/40R /20 all for corners I was thinking a 1.5. Or 2 max
@Kordare5 жыл бұрын
Honestly I dont know, I never ran anything like that. Use willtheyfit.com to get an idea where they will sit in comparison to stock.
@robdonaldson21245 жыл бұрын
Been looking for a clear answer to this question for a while now. Hope you guys could help.... Can I fit 33/12.5/17 inch tires on my jeep WK1 with factory wk (limited) rims, a rough country 2 inch lift and wheel spacers and have no rubbing issues. If so, what size spacers will I need? Thanks
@Kordare5 жыл бұрын
You will definitely rub when you turn. You need to do the normal pinch weld mod shown at the beginning of this video. You will still most likely rub near full steering lock
@robdonaldson21245 жыл бұрын
Okay thanks a lot for the info man
@Kordare5 жыл бұрын
@@robdonaldson2124 no problem, good luck!
@danielroman89343 жыл бұрын
@@Kordare can I put 33/12.5R17 on 3inch lift kit
@danielroman89343 жыл бұрын
On a Jeep Grand Cherokee 2006
@tonyfourpaws45112 жыл бұрын
thats how you fit bigger tires... just take off the damned fenders. easy. lol
@nickstewart12186 жыл бұрын
Do you have any issues with upper ball joints or cv shafts? Buddy had a wk and after installing his spacer lift he seem to run into issues.
@jg76185 жыл бұрын
Fixed the issue yet? I had the same problem with CV axles. But with new shocks.
@juanibarra41236 жыл бұрын
what rims are those?
@Kordare6 жыл бұрын
Pro comp 17x9
@ppi_god_6194 жыл бұрын
What backspace
@mjcolombia124 жыл бұрын
what does it costs to set it up like yours without tires?
@bbuckeye125 жыл бұрын
Got the same lift and only wanting to run 285s will I be able to with on flattening the pinch and cutting bumper?
@Kordare5 жыл бұрын
You need to flatten the pinch weld with anything over 30" tires.
@Cosala_z71 Жыл бұрын
How can I make my 3.7 4x4 sound like this ? Anybody know ? Also I wanted to try 33s but I’m scared it’s gonna be to much for the v6?
@Kordare Жыл бұрын
Swap to a V8😂 33s likely are a bit much for the V6 without changing gearing
@jinx2183 жыл бұрын
What is the exact size and measurements of your Rims, and Tires ?
@Kordare3 жыл бұрын
17x9 and 305/70/17
@12vLife5 жыл бұрын
Guys..I want to go with a vintage fat look on my small van. Can I fit 15x8 5x100mm pattern +12mm offset Basset Steel wheels wrapped in 275/60/15s on a stock 2018 Promaster City which currently has OEM 16x6.5 5x98mm pattern +52 offset wrapped in 215/55/16 . Both are around 25.5 high, the newer is close 10.8 wide vs 8.5 wide, but will also sit out further. I've read the van does allow 15 inch rims. I know bolt patterns are not identical but others are using 45 angled bolts. Thanks!
@Kordare5 жыл бұрын
Fitment is always vehicle specific. I'd suggest using willtheyfit.com and enter all your current and new specs and it will show you exactly where the new setup will sit compared to your current one.
@12vLife5 жыл бұрын
Nice Site! Got this: "Compared to your existing wheel, this new wheel will have an inner rim which is 21mm further away from the suspension strut. The outer rim will poke out 59.1mm more than before. " www.willtheyfit.com/index.php?width=215&aspect=55&diameter=16&wheelwidth=6.5&offset=52&width2=275&aspect2=60&wheel_size=15&wheel_width=8&offset2=12
@Kordare5 жыл бұрын
Great, so you should have no issue on the inside, now just measure on your van if you're okay with 60mm more poke, which is about 2.5 inches.
@joe2000jd262 жыл бұрын
What’d u do to get the rims and tires out that far, is it the rims? What’re the measurements because I’ve been trying to get a fitted like that
@Kordare2 жыл бұрын
Low offset wheels and also have 1 inch spacers. They are pro comp 17x9 wheels.
@joe2000jd262 жыл бұрын
@@Kordare oh word thank you homie
@johnmcdonnell48132 жыл бұрын
If I wanted to put a 5in lift in my wk would it damage any other components
@Kordare2 жыл бұрын
Look up super lift. That's the only way to lift more than 3 inches.
@RealPureHD5 жыл бұрын
I’m running KO2 34/10.5/17 on rubicon take off wheels and 1.5 spacers on the wheels... 4” lift in rear and 3-3.5” lift front. Suspension no spacers. And my tires barely clear the rear towards the door... I have no clue how you stuffed those tires there... they look bigger than mine
@Kordare5 жыл бұрын
Haha yeah I even had that 35 on the rear for 100 miles or so and no rubbing.
@RealPureHD5 жыл бұрын
Joey Shoe got an insta?
@Kordare5 жыл бұрын
@@RealPureHD yup! @kordare_
@jacobmonhollen57424 жыл бұрын
What brand was the extra inch spacer and how long and strength of bolts do i nees to add the spacer
@Kordare4 жыл бұрын
The wheel spacers are spidertrax and they include new studs
@NelloCarting964 жыл бұрын
what rims are those? size and brand?
@Kordare4 жыл бұрын
Pro comp 17x9
@DorkstaR245 жыл бұрын
You should definitely close the triangular gap! This will fill with mud and salt and your jeep will be gone very fast.. :(
@Kordare5 жыл бұрын
Haha well it's got holes in the bottom and I wash it regularly
@DorkstaR245 жыл бұрын
@@Kordare anyway, it's a 10min job, that could save you a lot of trouble
@kodylowery3525 жыл бұрын
I have a Commander lifted 3 inches. Everywhere I go they tell me the 5100 isn't available. Can you tell me where you got yours and if their ride adjusting?
@Kordare5 жыл бұрын
It's been years but I bought online somewhere, the fronts are height adjustable
@kodylowery3525 жыл бұрын
@@Kordare Did you see a noticeable difference in rear ride height after switching to the Bilstein. Im going to end up swapping all 4. I have the RR lift as well but it seems my current shocks are iffy.
@Kordare5 жыл бұрын
@@kodylowery352 I did the lift and shocks at the same time so it's hard to tell but the rear shocks arent supposed to affect ride height.
@kodylowery3525 жыл бұрын
@@Kordare Yea I have Skyjacker shocks in the rear right now but, I contacted Bilstein and they say they don't make an absorber for the WK/XK past stockride height but I see people online , forums etc that have them. Im completely stumped
@Kordare5 жыл бұрын
@@kodylowery352 check rocky road, they might sell them
@osky77773 жыл бұрын
In this video is your jeep stock with no lift? I'm wondering if I do the pinch weld mod if I can fit 35x12.5x17
@Kordare3 жыл бұрын
Nope I have a modified spacer lift and shocks. Lifted 3 inches all around
@osky77773 жыл бұрын
@@Kordare What would be the biggest tire to put on without doing any mods?
@osky77773 жыл бұрын
well with a pinch weld mod
@Kordare3 жыл бұрын
@@osky7777 I had 31.6" tires with only the pinch weld mod. That's prolly the max to get full steering lock
@jonathancobos70495 жыл бұрын
How much is it lifted and what tire measure do you bring?
@Kordare5 жыл бұрын
Lifted 3" all around with 305/70/17
@juniorg34724 жыл бұрын
Hey bro I know this is a old video but I just wanted to ask you did the 35 tire fit in the back with no problem thanks
@Kordare4 жыл бұрын
Yes they did!
@juniorg34724 жыл бұрын
Thanks bud love the channel new subscriber
@Kordare4 жыл бұрын
@@juniorg3472 appreciate the support🤘🤘
@haroldcallahan48875 жыл бұрын
How come it does not rub on the passenger side when going full lock right ?
@Kordare5 жыл бұрын
It rubbed the same on both sides before I did this mod
@haroldcallahan48875 жыл бұрын
@@Kordare mine was only on the drivers side
@Kordare5 жыл бұрын
@@haroldcallahan4887 that's really weird, they should be the same
@everready193732 жыл бұрын
Too bad you couldn't cut out both side exactly the same, then flip them around and weld it in on the opposite side it came from. I wonder if that would work.
@Kordare2 жыл бұрын
Yeah it's just tough to try and make the exact same cut especially when using an angle grinder.
@sebastianm99714 жыл бұрын
Hey bro , i want to put some 35s on my cherokee 2006 which lift kit do you recommend thank u and how can i find it
@Kordare4 жыл бұрын
You probably need a 4 inch superlift to fit 35s without major cutting
@AyyItsJk4 жыл бұрын
3" Waverspeed and major cutting works too
@RighthandleftSide5 жыл бұрын
What rims are you running? Looking to change my stock rims
@Kordare5 жыл бұрын
These are pro comp steel wheels. I believe 17x9.
@soybarbon19996 жыл бұрын
What's the wheele size on that ? 000/00/00 ?
@soybarbon19996 жыл бұрын
Joey Shoe thank you so much ! Any info on the rims ?
@calebrodriguez34654 жыл бұрын
What's a good setup to fit 33s on a 2wd 2007 commander
@Kordare4 жыл бұрын
Not sure I've never had a commander
@johnmajerov41224 жыл бұрын
what if jeep is weighed down or has a tow load?
@Kordare4 жыл бұрын
I haven't had issues rubbing in the rear unless I'm offroading
@andreadalco3 жыл бұрын
Good job dude! Also the WK Hemi 5.7 V8 could fit 17” wheels? Or it’s a problem for brakes? Thanks
@Kordare3 жыл бұрын
Thanks! I'm not completely sure but I'd assume so.
@johnmcdonnell48132 жыл бұрын
I know this is late but could you have fit 35s?
@Kordare2 жыл бұрын
Yup I put a 35 on at the end of this video
@johnmcdonnell48132 жыл бұрын
@@Kordare did you have to mess with the gears at all going with 35s
@Kordare2 жыл бұрын
@@johnmcdonnell4813 I didn't but it would definitely help if you did.
@fjellfrank3 жыл бұрын
a litle rock or bump and it hits ??
@Kordare3 жыл бұрын
I'm only full lock when parking so it basically never hits
@nickanulli44175 жыл бұрын
4.7L Magnum?
@Kordare5 жыл бұрын
Yup it's the 4.7
@yerwrng3 жыл бұрын
The 4.7 is a power tech and 5.7 and bigger are hemi . Chrysler hasn't used the magnum badge in a jeep since 1998 . Yes I know that's an anal reply ;-)
5 жыл бұрын
10:20 me jodistes los ojos!!! estaba sin pantalla!!!
@joshuaschoger8762 жыл бұрын
Where’d you get your hitch I need one for my 4.7
@Kordare2 жыл бұрын
It was on it when I bought it. I'm sure you can buy them online
@definitelyduse3 жыл бұрын
Are u using wheel spacers????
@Kordare3 жыл бұрын
I have 1 inch spacers
@101Parkside5 жыл бұрын
You don't fuck around!
@Kordare5 жыл бұрын
You got that right
@mechanixmobile47523 жыл бұрын
What about when you bottom out or put pressure on the springs and make a turn forsure it’s going to hit what a waste of time
@Kordare3 жыл бұрын
Yeah if I'm full lock and flexing it will hit but I'm rarely in that situation. This was mostly done to be able to make sharp turns on flat ground and while parking so it works perfectly for that.
@strongboy323 ай бұрын
This the 3.7, 4.7 or hemi?
@Kordare3 ай бұрын
4.7
@HooodTv3 жыл бұрын
Will I rub on a 4 inch lift? Fitting the tires you have in?
@Kordare3 жыл бұрын
You'll probably need to at least do the standard pinch weld mod
@HooodTv3 жыл бұрын
@@Kordare thank you soo much. What lift you have exactly on ur truck. I might get ur set up instead. And were can I find it? Thanks
@Kordare3 жыл бұрын
@@HooodTv I have the rocky road 2.25 lift but modified in the rear to make it 3". Also used bilstein 5100 shocks
@HooodTv3 жыл бұрын
@@Kordare were did you purchased or what you do to add the extra inch in the back?
@Kordare3 жыл бұрын
@@HooodTv I welded a piece of pipe on top of the spacer and I think I ordered on rocky road website
@44sleepyjim5 жыл бұрын
What jeep is that? What engine also?
@Kordare5 жыл бұрын
2005 grand Cherokee, and it has the 4.7 v8
@xvuxi74402 жыл бұрын
What keep is that
@Kordare2 жыл бұрын
Wk Grand Cherokee
@MrDOA3135 жыл бұрын
Will 295 fit in the front without spacers?
@Kordare5 жыл бұрын
Depends on what else you have done
@MrDOA3135 жыл бұрын
Nothing just a stock 06 Cherokee 4x4 Hemi , What all needs to be done I was thinking 1.5 spacer
@MrDOA3135 жыл бұрын
Kordare 295 /40/20
@Kordare5 жыл бұрын
@@MrDOA313 you definitely need some type of lift, even with 3 inch lift and 1 inch wheel spacers you need to do the pinch weld mod to fit 265/70. Anything more you either need a bigger lift or do what I did in this video.
@Kordare5 жыл бұрын
@@MrDOA313 295/40 is only like 30 inches so you might be able to get away with just a wheel spacer