I bought a power amp with volume bass mid and treble controls. So much better than plugging into an fx return on an amp.. Harley Benton 100 power amp (into a 2x12 Celestion 80/70 cab) Affordable price and sounds great...
@RAX1Music Жыл бұрын
Great video - just for info, unless someone has already identified this, but you can turn off the AMP and CAB options in the GP-200 so that you can plug it straight into the amp itself rather than into the amp's return. It's in the manual, page 19. Hope this helps!
@jcb.987 ай бұрын
Exactly the comment i was looking for mate. Thanks alot
@ClNoBody7 ай бұрын
Yes, but he wants that ability separate for the left and right outs.
@AngusNB2 ай бұрын
The problem is this turns off Amp simulation for all outputs. You may want to use an Amp sim for recording or front of house.
@frankconti6591 Жыл бұрын
Btw: I find this channel simply-brilliant & beautiful
@AleksandrsKarimovs2 жыл бұрын
Thank you. That's the subject I am specifically interested in and I will think twice before bying Valeton. As a musician, I often play live, so having this option of using a separate amp output while xlr's go to front of desk is critical for me. Usially not every amp available on stage has an fx return.
@therealtech833 Жыл бұрын
Good point, but you have to remember the price point of this thing, it's punching way above its weight. My buddy just picked one up as a backup unit to his HeadRush, some ways he loses almost nothing, just a few glitches that if software fixes, will make it virtually the same, in terms of usability. The HeadRush costs double.
@uptownphotography Жыл бұрын
I watched your video again, as now I have ordered one of these units and even better the second time around. There's quite a bit fuller sound when we hear the two signals (amp and direct signal) together. I have heard videos with just the direct signal (left and right) recorded direct and this unit for the money sounds really good. I do think also you bring up very valid points how Valeton could improve this unit with a few firmware tweaks. Hope they're listening to your advice...I agree. Phil NYC Area
@gus3333 Жыл бұрын
The latest version of my GP-100 (v1.3.2) in settings, there is the option to tuurn on/off the cab for L or for R. I guess this is what you mentioned. So, I guess it is possible to use the cab from the venue and the full patch form the PA.
@Eddyvnhln515015 күн бұрын
Looks like he missed your post I’m going to look see if 200 followed suit 😊😊😊😊
@marceliguitarelli9314 ай бұрын
Sooo actualy you can use every output with or without amp cab so. You can plug Valeton into cab/amp fx loop return without cab sim and second output into mixer with cab sim. You hace those options in global setting and even more after pluging into computer so this device is perfect 😅😅😅
@supay6537Ай бұрын
Can you use Valeton GP200 with Marshal Code 50?
@gsroy-iw7ed Жыл бұрын
Very good Super tones
@sarojmusic Жыл бұрын
My valetone default tone data lose when I plugged power cable display is blinking now I have only it's gp 200 in display how to recover ? I am doing reset but not recover how to recover please any idea 🙏
@fractionjackson Жыл бұрын
I watched your video as I was trying to work out how to get a good level into a combo amp. I realised that I was always going to have the 'double' amplified problem as my combi amp would always be adding so much on top of what is coming from the valeton. Of course you can turn off the amp and cab modelling, but I wanted to hear it. Having tried both balanced and unbalanced it was still way way too loud. My amp does not have separate input for return and send. Just the standard input. So... I started looking at the send and return paramaters I settings, and realised that you can move the send from it's default position near the start of the signal chain, to the end. Meaning that instead of the send being a dry signal, it can be a wet signal with it's own output level. (send level) so using the send output of valeton set to level 3/100 I can send the fully wet signal to my combi amp input at a useable level. Presumably I've made some unforgiveable errors in dojng this, but sounds OK! 😂
@Rushan21126 ай бұрын
Dude, I was coming here to post this same setup (I think?). I always played pedals through an amp - which doesn’t have an FX loop. Using the GP200 I wanted to go XLR out to front of house but ALSO play through my amp. Problem is, amp/cab models suck in front of the amp. So I moved amp and cab blocks to the end, and fx loop block right before. So my fx send is sending all the pedal chain without the amp/cab sim, and the main out is including the amp/cab sim to the sound guy. Anyone else doing this? Have yet to test it live, but at home the sounds from the amp and the XLR main out (tested via a usb interface and in-ears) sound good.
@dajojojo7 ай бұрын
Great video thanks. Is it possible to place the fx loop send in the chain before the amp/cab emulation as a signal feed to a combo input, and loop straight back into the return (e.g. with a Y splitter cable), then use the main out (post amp/cab emulation) to send to the desk for FOH? Not sure I worded that well!
@frankconti6591 Жыл бұрын
‘Especially glad i found you !!!😃🌾🚧🎭🎈👁️
@peppaz7 ай бұрын
Great Vid - do you know if the pedal can used for the octave/pitch shifter effect? (bulls on parade style)
@siena95943 ай бұрын
Is it possible to set the 'no cab mode' independently for each output..? The global setting seems to apply whichever option you choose to all outputs from what I can see. I'd like to run the balanced XLR's (both L &R) into my mixer/studio monitors with the cab sim 'on', then I'd like to take the Unbalanced 'L' channel only into a clean power amp (Harley Benton GPA-100) with the cab sim set to'off' as this will be running into 2 x12 Celestion loaded speaker cab... so in a nutshell I want cab sim 'on' for the XLR and cab sim 'off' for the unbalanced... but I can't seem to find this function in the desktop software..?
@siena95943 ай бұрын
@@andymaidment111 exactly Andy, I’m sure it could be done via simple firmware update. My Kemper stage lets me configure all the outputs independently…. admittedly there’s a huge difference in price point, but it would be great if they sorted this
@degstenk9 ай бұрын
Hi! Any tips for how I can turn off direct monitoring? I am stuck with two signals, one from the GP itself and one from FL Studio. Connected to computer via USB and headphones connected to "headphone out" on the GP. Thanks for a great video!
@jenniferthomson849 Жыл бұрын
I buy one of these thinking it would be better than my boss gt1 .how ever the distortion and delays reverb and over all sounds is better on the boss gt1 a lower class unit. And runn on battery and smaller to get around. So looks like I'm selling the laleton
@Spartan_827 ай бұрын
Is this method (output right or L(mono) direct into fx return of the amp better than 4cable connection?
@jom3934 Жыл бұрын
Thanks for sharing these infos. Does Valeton sound thin when not using IR and connect to any solid state amp or tube amp?
@KrachWerke Жыл бұрын
I use it all the time with amp emulation on and into fx return of the amp. No problems.
@jom3934 Жыл бұрын
@@KrachWerke thanks for the response! Cheers!
@jaychen2000metal3 ай бұрын
Ok so dont go from mono out into the front of my amp and i'm also running effect send and return from amp to Gp-200 with crunch channel. This is why i have a zappy tone with feedback issues ?
@Eddyvnhln515016 күн бұрын
Right, go into a Headrush FRFR 1x12 or PA…. But if you wanna have a lot of fun with it, there’s a new FRFR speaker. It is called the Spark live. It’s a tad more expensive. Go check it out on a KZfaq review. The difference here is it is coiled for voice if you turn this speaker on its side, it knows, and the coils open up for vocal Recreation there’s a lot of ins and outs on the back of it and it’s got a lot of its own effects useful attacks. The delay in the Reverb is off the hook.😊 so with your problem now you just wanna turn off the cab emulation in global effect and go into your return on the back of your cab and that’ll take care of all that unwanted noise that you’re hearing and when you can afford to get an FRFR it is my suggestionto get one
@pogg616 Жыл бұрын
I do have a question regarding the balanced xlr output: can it be plugged into the line inputs of a audio interface using a XLR to TRS cable? It doesn't specify in the manual what type of signal is outputting.
@KrachWerke Жыл бұрын
As far as I know trs is just a balanced type of quarter inch jack so I would say yes IF your interface accepts trs. I can't confirm that because my interface I know only accepts xlr and not trs
@hardisweetspot2973 Жыл бұрын
Does the TS output is DRY signal? and the XLR output is the WET signal? im a bass player
@KrachWerke Жыл бұрын
Hi! No, you can only switch off cab emulation on either left or right channel but no control over TS or XLR
@yahyawinata287 Жыл бұрын
how to make an in ear set up just using this effect? anyone knows?
@KrachWerke Жыл бұрын
Hmm, the Valeton has a headphone out, that could possibly be sent to a in ear mix I suppose.
@jaycee4385 Жыл бұрын
for some reason when i plug in to my amps power amp in it sounds so swallowed and muddy , is there any way past this?
@KrachWerke Жыл бұрын
If the power amp runs to a guitar cab please check that you have cab emulation switched off on that channel on the Valeton. If it goes to a full frequency speaker then you need the cab emulation on. That is the only thing I can think off for now.
@tolsen8212 Жыл бұрын
How do you find the latency when used as an audio interface?
@KrachWerke Жыл бұрын
I haven't used it as an interface so I am sorry but I don't know how it performs in that way
@tolsen8212 Жыл бұрын
@@KrachWerke Cheers
@bisheshchettri2002 Жыл бұрын
Does this have tap delay feature??
@KrachWerke Жыл бұрын
Yup!
@1972Georges2 жыл бұрын
Do I connect my FRFR speakers to the balanced or unbalaced output? In the manual, they say both is possbile. I thought balanced out is to connect to the PA / Front of house and the unbalanced output is used with the FRFR Power Speakers....pls. help. thanks.
@sonofdirt Жыл бұрын
It doesn't really matter. XLR/balanced is just better for long cable runs, it reduces noise. Unbalanced is fine to anything just prefer balanced when you can. They both carry the same audio signal so don't worry about doing anything wrong. (Just don't send phantom power to the XLR lol)
@1972Georges Жыл бұрын
@@sonofdirt thanks very much
@Romanlegion199010 ай бұрын
Which frfr are you using?
@1972Georges10 ай бұрын
@@Romanlegion1990 Valeton GP-200
@Romanlegion199010 ай бұрын
@@1972Georges what are you using for your frfr speaker?
@BLU3Fi5H Жыл бұрын
Am I the only one having an issue with my reverb mix maxing out after saving a preset? I can save it with the reverb mix down around 30%, and after saving it seems fine, until I switch to another preset and come back to it. It always comes back with the reverb mix maxed out, regardless of what I do. Don't suppose anyone knows any fixes for this?
@KrachWerke Жыл бұрын
Actually I did have a problem like that but it just went away. I wonder if it went away after the firmware update. I am sorry but I can't remember.
@BLU3Fi5H Жыл бұрын
@@KrachWerke in case anyone else has this issue with theirs. There are 2 common issues people seem to have with these pedals actually. 1. Mix, gain, volume, etc maxing out is often caused by setting a parameter for expression pedal 2, but not having it plugged in. It remembers the maximum setting for the expression pedal and restores it to that level when you switch back to that patch. 2. No sound on a downloaded patch. In most cases this is caused by leaving the effects loop setting on series. Switching to parallel should fix this issue. I was ready to give up on my pedal after I kept running into issues like these, but they are pretty easy to fix, simply by disabling the second expression pedal within the patch or switching to parallel on the effects loop. Maybe I'll make a quick video allowing how to fix these issues, in case anyone out there might not be familiar with the settings.
@KrachWerke Жыл бұрын
@@BLU3Fi5H Both points super helpful, I am sure it happens to many folk. I overlooked point 1 until recently. Thanks for sharing!
@BettoniFerreira7 ай бұрын
Man, sorry, you take too long to get to the point, it's tiring
@richardchristensen176816 күн бұрын
Wow This just seems way too complicated!!!!!!! Like way way way too complicated just to get the output right?
@uptownphotography2 жыл бұрын
Nice video. I was considering this unit for direct recording to a DAW... Phil NYC Area
@whiskeywhiskeyromeo3730 Жыл бұрын
I am dumb....are you saying I could plug straight into computer without one of those Scarlett focus rite type devices ? Thanks
@uptownphotography Жыл бұрын
@@whiskeywhiskeyromeo3730 When I bought it from a Valeton dealer on ebay, that is what he told me. He said the DAW will recognize it as a device just like an interface. I actually never tries it yet, but I should give it a try myself. Hope that helps. Phil Jersey Shore Area
@whiskeywhiskeyromeo3730 Жыл бұрын
@@uptownphotography thank you Sir, I bought this unit short time ago and am brand new at trying computer DAW stuff....57 here... thanks for your kindness!!! Peace
@uptownphotography Жыл бұрын
@@whiskeywhiskeyromeo3730 My pleasure....Be well and happy recording.
@workdays8280 Жыл бұрын
Is there any one on KZfaq he no how to use this unit. Every one is just playing it and just talking.
@swedeinla Жыл бұрын
its so easy its basically self explanatory....That and you have a manual