KTM 390 Adventure Oxford Hot Grips Install

Рет қаралды 13,275

3 жыл бұрын

Our Website: www.overlandexplorersuk.com/
Our Facebook: / ukoverlanders
Our Instagram: / overland_explorersuk
Music: www.bensound.com/

Пікірлер: 32

@itsmaddiening9962 2 жыл бұрын

Of the videos I have watched, this has been by far the most helpful. Good tips on exactly what to watch out for with the clearances of the grip wiring lead and how to mark it before gluing everything down. Thanks!

@abominacja47 2 жыл бұрын

Installed mine today, took me 4 hours! Thank you very much for this video, it helped me a lot. I have chosen adventure grips, these have to be cut to the minimum allowed to fit. Works perfectly. Goodbye cold hands :)

@michaelsupple6081 3 жыл бұрын

One of the best how to videos I've watched. Couldn't be better. Thanks!

@adrianusai 3 жыл бұрын

Awesome, very informative. Might do this for winter :) Thanks so much

@rubenhurtadocerrano7403 3 жыл бұрын

Nice video!!!. best regards from Argentine

@ozlegacy 3 жыл бұрын

Dremel with cutting disc also works wonder!

@eddy802 2 жыл бұрын

Great video to calm my nerves before taking the tools to my bike - thanks. My only question is, do you really need to be able to apply full front brake with the throttle wide open?

@noControl556 Жыл бұрын

Yeesh, so glad the 890 has factory heated grip options.

@Beachcraft48 Жыл бұрын

Thanks for the video. Question, I purchased Pro Taper EVO Adventure bars 1-1/8. And a set of these Oxford Heated Adventure grips. I'm trying to install today, but the grips are really loose. What's your recommendation for this issue? Appreciate your feedback👍

@harnalsachin8591 3 жыл бұрын

Can i get the link of the product please? The website has 2 versions of touring grips and they are both priced different. Not sure which is the right one.

@rottyt3327 10 ай бұрын

とっても参考になりました。ありがとうございます。

@Davidlouis3 3 жыл бұрын

Well done

@ItsArunSharma 11 ай бұрын

Which model of heated grips did you used for adventure 390?

@user-vs4cx1fo8u 2 жыл бұрын

Very useful! Could you please provide 3d-model of mount? Thank you in advance!

@fadetoblackMotorcycle 2 жыл бұрын

Hi mate! I'm having some toruble fitting the one on the throttle... Same bike and same grips. Very hard to push in 😅

@infinitydreamzz 2 жыл бұрын

Probably too late but maybe someone else can benefit.. First of all, if it's so tight, no need to use any glue. To push it in, use a plastic mallet gently, if that doesn't work, take a socket bit that is the same diameter as the grips and hit it with the mallet, again gently.

@dennyw8357 2 жыл бұрын

Dankeschön. Kamnst du mir die STL datei geben für den 3D Druck?

@tribeofaviation1399 3 жыл бұрын

Hey what is the 3D file for the mount?

@OverlandPNW 3 жыл бұрын

I agree about just using a hack saw. Nice install video !

@OverlandExplorersUK 3 жыл бұрын

Thanks! Sometimes the simplest tools are the best for the job :)

@kevinlawton5761 3 жыл бұрын

Would it not be better and easier to cut end of grip off, rather than cutting logs off which are there to stop grip rubber fouling the switch housing resulting in a potential throttle sticking open!

@OverlandExplorersUK 3 жыл бұрын

Them lugs near the switch housing hook under the original grips so you can't normally see them, the new grips don't do that Plus as long as the grips don't foul the switch body when gluing them on (you can see us do that in the video) then they won't be able to move once the glue sets. If the glue gives up then you won't be able to twist the throttle anyway as the grip will just spin around the throttle tube

@tatsumo 3 жыл бұрын

Hey dude. I have a question. Which one is Oxford hot grip product?

@OverlandExplorersUK 3 жыл бұрын

The one I fitted is the touring version, the adventure version should fit but you will need to trim the grips down

@tatsumo 3 жыл бұрын

@@OverlandExplorersUK Thanks bro.

@RandolphMaunder 3 жыл бұрын

How long are the original grips?

@OverlandExplorersUK 3 жыл бұрын

Around 120mm I think

@infinitydreamzz 2 жыл бұрын

Good video but connecting heated grips straight on to the battery is the second best way of doing the job. Best way is to connect to a cable that goes live when the ignition is switched on, so you cannot accidentally turn the heated grips on when the bike is not working and drain your battery.

@frankiepitt9135 Жыл бұрын

They turn off automatically

@nicolaszapata2201 3 жыл бұрын

Please share the 3d desing

@dogshithandle111 2 жыл бұрын

Great video, however no additional information in the description whatsoever. No link to the grips, no link to the 3D model for the base of the control module. I believe those are important details that would be useful not only to me.

@frankiepitt9135 Жыл бұрын

Do a bit of research for yourself and don’t be lazy.