KTM SuperDuke 1290 GT - Remus Hypercone
Рет қаралды 20,042
6 жыл бұрынKTM SuperDuke 1290 GT with Remus Hypercone - with and without dB killer
@qwerwolf69 3 жыл бұрын
Because of this video, I bought the Remus for my SDGT. For mine (built in 2018) it was already EURO4 compliant. From this point on the DB-killer was welded into the exhaust. about 2 cm on the right and left side. I got him out anyway. 😁😍🎶🎵
@mavvegbg 3 жыл бұрын
I hope you are enjoying it! Regarding the welding - as long as it can be handled.... ;-)
@fabianbv82 2 жыл бұрын
Hi Qwerwolf. How did you removed the welded points in the DB-Killer? I have same issue with my new Remus Hypercone.😥
@qwerwolf69 2 жыл бұрын
@@fabianbv82 I bought some kind of cheap Dremel. A multi-function tool that can also be used for grinding. With that i grinded off the weld seams plus approx 1 mm of the metal edges. Be careful when grinding. It is best to put at least 3 layers of adhesive tape on the carbon end cap in case you accidentally slip off.
@fabianbv82 2 жыл бұрын
@@qwerwolf69 really appreciate your help!!!
@alexanderd.6473 2 жыл бұрын
I have the same exhaust but can’t get the screw out. What kind of imbus or tool dit you use? The space is very narrow..
@mavvegbg 2 жыл бұрын
I used a multicutter
@Carolina_Squid 3 жыл бұрын
I know this video is old buy I bought a superduke last year and have alwahs ran the Angel Gt's on prior bikes. How well does the superduke do with them mileage wise? Im used to 6-6500miles (US) out of an Angel.
@mavvegbg 3 жыл бұрын
I've kept to Angel GT (and now GT II) mostly and like them. Mileage wise it's up to you how you ride, but I think the GT isn´t totally tire friendly kind of bike :-) . Can't give exact mileage.
@gorgo666 3 жыл бұрын
My rear was shot after about 4500
@speedster279 6 жыл бұрын
How did you remove the baffle/db killer?
@mavvegbg 6 жыл бұрын
There was a tiny welding that kept the screw in place, so I had to give the welding a tiny touch with a Bosch PMF 180 and then it was possible to unscrew it
@Pmason718 4 жыл бұрын
Is that a slip-on? Did you have to remap?
@mrlars3166 4 жыл бұрын
Pmason718 Yes, it’s a slip-on that’s easy to mount. No need to remap as far as I know
@Pmason718 4 жыл бұрын
Mr Lars ok thanks.
@mraki1980 2 жыл бұрын
Bike porn, have to buy it on my SDGT. How about the certificate of using in EU?
@MrFlyer468 2 жыл бұрын
Not homologated
RokBagorosStuntrider
Рет қаралды 164 М.
Jason Derulo
Рет қаралды 63 МЛН
Comedy Club
Рет қаралды 7 МЛН
twenty4
Рет қаралды 24 М.
Moto garage
Рет қаралды 2,6 М.
Twowheels Dutch
Рет қаралды 1,4 М.
Нарезки из фильмов
Рет қаралды 3,9 МЛН