Welcome back sir, Nice new toy plus nice new property, Congrats. Looks like you have a lot of acres👍🏻👍🏻 and can’t wait to see the build videos. Have a great weekend 🙂🙋🏼‍♂️👍🏻

Good day to both of you 😉👍 That will be a very nice steel crate 😉👍💪 Great description of your new Flail Mower 🧐👍 You live into a beautiful land seeing by your great drone shots view 🧐👍 Keep up your OUTSTANDING WORK CHeers 😉👍🍻

💥 Glad you’re enjoying your new implement. I think the hammer blades would even do better for you. Those Y blades are really best for lawns. Tighten that belt tensioner. *Keep on tractoring!* 😁👍

Mowing is instant gratification!!

Appears to really bunch up the grass under the rubber flap, did you ever just try to lift the mower while it is spinning? to see if it clears?

Bought the same mower with the hammer knives two years ago for my old 19 hp tractor. The salesman said it wouldn’t work on less 20 pto hp. It was fine on light to medium density grass and weeds. Have to make two passes on heavier stuff. It does grind up 1” or less diameter limbs pretty well. Never removed rear rubber skirt, it never gets plugged up there that I know of. I now run it on a 35 hp tractor with no issues.

How ya doing? New subscriber here. I love that flail mower! If I could go back in time, that's how I would have built my trails. It looks like it would do a much better job than a rake! - David

Awesome video! Do you have the actual width and mowing width measurements? The website shows a couple different measurements

I was considering the Woodmax unit. It appears to be well built. I went with the commercial grade BETSCO unit specifically because it has the adjustable rear discharge. Where the Woodmax has a rubber flap, the commercial Betsco has an opening panel. I am able to open up the rear discharge panel in tall weeds, and the unit expels the cut grass directly out the back. When the discharge is closed, I have the same issue you have. The extra cut grass clumps up in the unit, and hurts the cutting ability. You might be better off with hammer blades.

My flail has a cover at the back that can open up where your Rubber belt is. When doing long grass like you had withg the cover closed is hopeless and clogs same as yours. Opening it up makes a world of difference and it handles the long greed grass much better. Either take off the flap or put a bar along the bottom edge so you can tie it up out the way. You'll find it works much better on the tall stuff then.

I have the same tractor the brush hog works pretty good you don't have to go slow and there's no clogging

Ive got the BC2680. WHat size flail mower would you recommend for it?

I think the clogging is because of the rubber flap in the back.

I have a Kabota B 7100 it’s 19 hp and 13 hp at the PTO Do you think I could run a flail mower

You definitely got a good one, but something just isn't right with it. That roller was so clumped up that you could see it wasn't even turning. I think I'd eliminate that back flap all together and let it breathe. The clogging is why it wasn't even cutting fully on some of the passes - you were going slow enough. Try it and see...and let us know. As far as flails in general though, I really don't know why anyone would even use a rotary cutter, as the flails do such a better finish job while taking less space and less power to run.

you should mow at a higher setting 1st when mowing that heavy tall material. then lower your machine for a final finish.

Have you tried hammers? And have you experience in hitting rock?

素晴らしい👍

will it deal with stumps?

Adjust your top link!

You're clogging up because your tractor doesn't have enough PTO hp for that mower and/or you're not running at 540 rpm. A flail should pulverize the cut grass particles, you are leaving long strands of grass. The mower rotor isn't going at a fast enough to create the up draft needed.

personally, IMHO opinion unit did a horrible job. I have a Landspride finish mower that does a very good job, I just raise the mower

A toy