Kubota BX25 Backhoe Removal
Рет қаралды 455,323
12 жыл бұрынHere is a brief tutorial on how to remove the backhoe from a Kubota BX25 tractor. This same process will work for the Kubota BX24 as well. Please refer to your owner's manual for more detailed instructions.
Jennings Equipment, Inc.
1030 River Road
Puyallup, WA 98371
(253) 845-8801
www.jenningsequipment.com
@thegrumpytexan 12 жыл бұрын
Thanks for this video, I watched it several times so by the time I bought my BX25, I already knew how to do this as quick as you did!
@papalilburn 8 жыл бұрын
Thank you, very simple procedure the way you demonstrated. Would you suggest placing blocks or jackstands under the backhoe unit to prevent bleed down drop?
@cewall2 11 жыл бұрын
Nice Job, direct, yet enough detail to do it right!
@joseluizormind269 5 жыл бұрын
Pôr do que
@GG-xs8vt 3 жыл бұрын
Doing this tomorrow. Thanks for the help.
@fortonk 10 жыл бұрын
Very good tutorial video, thanks for showing.
@JenningsEquipment 11 жыл бұрын
For what you described, I would probably go with a bigger machine. This one will do it, but it will likely take some extra time.
@pure2strokepower 10 жыл бұрын
I am trying to do this on my l35 but the pin is stuck any tips as to how I could get it out?
@stewpidaso26 8 жыл бұрын
can I get the Kubota backhoe for my 2670? or do I have to go after market?
@laymanware7350 4 ай бұрын
Awesome video, thanks 👍
@printisalive 6 жыл бұрын
I have this exact tractor and backhoe, I need to replace the B hydraulic line which is the line that goes to the first ram. I cannot access the disconnect because they are so close together on the manifold under the two joysticks. Any recommendations?
@JenningsEquipment 6 жыл бұрын
If they are one's I think you're describing, you have to disconnect the other hydraulic lines from the outside in to the ones you want to replace. It's a pretty tight area to work in, for sure, so there's no easy way. Threading them out through the arm is not an easy challenge either. I hope this helps a little.
@jakeesmart5250 6 жыл бұрын
Does kubota make a subframe for a B2410 so I can use that backhoe on it?
@JenningsEquipment 6 жыл бұрын
Unfortunately, no. You may have to go to and aftermarket brand such as Woods to get a subframe mounted backhoe.
@hunt4fish 6 жыл бұрын
easy, thank youi
@franksweets1859 8 жыл бұрын
Genial!
@epautos 10 жыл бұрын
Thanks!
@joaosoares8669 9 жыл бұрын
Good
@georgeschuster8718 3 жыл бұрын
Thank You
@marutinikammarutinikam7840 3 жыл бұрын
'Try r dreeu. hhh e eueujuuj+oi w de qq2qwq10p
@Technique-p8v 4 ай бұрын
💞💞💞💞👍👍👍👍