Kubota L-Series Tractor Grease Points [HOW TO]

No video

Kubota L-Series Tractor Grease Points [HOW TO]

Рет қаралды 27,927

Күн бұрын

Today’s video will be a walk through/demonstration of all of the grease points on the Kubota L3901, Kubota L3301, and Kubota L2501. I made this video to help owners identify where the grease points are and some quick tips to get a grease service done.
If you like this video please check out my other videos and comment, like, and subscribe!!
If you want to see something with this tractor or implements please leave a comment and I will see what I can do!
Thanks for watching!!

Пікірлер: 37

@yate0020 3 ай бұрын

FYI check out the notes in the manual for the front axel grease fitting. All Kubotas i have worked with have a breather port bolt to remove first, then grease that zerk until grease flows out of the breather port.

@pipingcalifornia3476 2 жыл бұрын

You missed the two on the quick attach. Also, the loader calls for grease every 10 hours. Thanks for the video!

@CarolinaEarthWerx Жыл бұрын

Thank you!

@LeeMulcahyForSenate 2 ай бұрын

Really appreciate the camera further away on the 2nd side of the loader. Great job.

@PYehl1 2 жыл бұрын

Love the yellow Wranger and your Jeep tat!! I had a Yellow 2001 Wrangler for 14 years till the frame started rusting out. Thanks for the video - my L2501 at around 35 hrs - so wanted to make sure I had all the locations known for the tractor part - been doing the loader every 8-10 hours.

@CarolinaEarthWerx Жыл бұрын

Thank you! Go follow my Jeep channel, @YelloJeepin! I post a lot of Jeep stuff on there.

@LoftisforTreasurer 3 ай бұрын

Thanks!

@CarolinaEarthWerx 3 ай бұрын

No problem thanks for watching!

@tankandlaci 3 жыл бұрын

Great video. Greased my L3130 today and I’m sure I missed the pedal ones underneath. But dude. It’s a tractor, lil grease over run not gonna hurt it 🤪 thanks for the help.

@CarolinaEarthWerx 3 жыл бұрын

I know what you mean! I would have missed them too if I didn’t read the manual lol

@tankandlaci 3 жыл бұрын

@@CarolinaEarthWerx I actually got up under it today and didn’t have those on my tractor but in total I found 8 more that I didn’t see because of the video so thx again.

@CarolinaEarthWerx 3 жыл бұрын

No problem!

@charlesstogner6755 2 жыл бұрын

Good information. Thank you

@CarolinaEarthWerx 2 жыл бұрын

No problem, thank you for watching!

@coolbreeze855 2 жыл бұрын

Great video! Thanks

@joetterolison4093 2 жыл бұрын

I greased Mine today and missed the axle & pedal linkage fittings Thanks for the demonstration

@CarolinaEarthWerx Жыл бұрын

No problem! I’m missing a few in this video

@tedzimmerly 2 жыл бұрын

Just what I was looking for. Thanks

@somosknow1 2 ай бұрын

Great video. Thank you Stupid question- what’s up with the grease pouring out the connection point? I thought that meant the zerk is clogged

@CarolinaEarthWerx 2 ай бұрын

Thanks! Crappy grease gun

@danr97123 3 жыл бұрын

thanks for sharing. very helpful!

@CarolinaEarthWerx 3 жыл бұрын

Glad it helped! Thanks!

@toetet1761 2 жыл бұрын

Thanks

@CarolinaEarthWerx 2 жыл бұрын

No problem

@joetterolison4093 3 жыл бұрын

Label on FEL says EVERY 10 Hours for the FEL

@CarolinaEarthWerx 3 жыл бұрын

That’s is correct, left out of the video.

@joetterolison4093 3 жыл бұрын

@@CarolinaEarthWerx I did see some grease points I have been missing that You pointed out....TY

@CarolinaEarthWerx 3 жыл бұрын

Thank you, glad you enjoyed it!

@No_bread-and-circuses 8 ай бұрын

Don’t use whatever grease you would like. The manual says to use a high-quality grease designating extreme pressure and containing Molybdenum disulfide. This grease may specify Molly EP on its label. Kubota high performance Molly lithium all purpose, heavy duty grease is a good choice.

@CarolinaEarthWerx 8 ай бұрын

AP and EP differences are denominator at best. But you are correct. And just remember, any grease is better than no grease! 🤣🤣