KUBOTA Mini EXCAVATOR ENGINE OIL CHANGE

KUBOTA Mini EXCAVATOR ENGINE OIL CHANGE | KUBOTA U35-4

Рет қаралды 17,631

Күн бұрын

KUBOTA Mini EXCAVATOR ENGINE OIL CHANGE | KUBOTA U35-4 | Oil type, capacity, intervals ect.
Machine Kubota Mini Excavator U35-4.
How to change engine oil on KUBOTA Mini EXCAVATOR U35-4.
Always Refer To Kubota Excavator U35-4 Operator's Manual for any specification.
KUBOTA OIL FILTER: # HH151-32430
ENGINE OIL CAPACITY: 1.4 gal (5.3 L)
OIL CHANGE INTERVALS: every 500 hours, or every 1 year in the case that service hour is less than 500 hours.
OIL TYPE: Engine Oil approved by A P I service classification and proper SAE engine oil according to the ambient temperature:
Above 25C (77F ) SAE 30 or SAE 10W-30, SAE 15W-40
0C to 25C (32F to 77F ) SAE 20 or SAE 10W-30, SAE 15W-40
Below 0C (32F ) SAE 10W or SAE 10W-30, SAE 15W-40
#kubota #oilchange #pistonshack
KUBOTA mini EXCAVATOR AIR FILTER REPLACEMENT | Kubota U35-4 PRIMARY, SECONDARY AIR FILTERS intervals
• KUBOTA mini EXCAVATOR ...
HEAVY EQUIPMENT BAY Playlist:
• HEAVY EQUIPMENT BAY
KUBOTA U35-4 Mini Excavator HORN PROBLEM | Easy DIAG & REPAIR | HORN TROUBLESHOOTING
• KUBOTA U35-4 Mini Exca...
PistonShack's Top Diagnostic Tools:
1. BlueDriver Bluetooth Pro OBDII Scan Tool amzn.to/2X9hnFX
2. LAUNCH X431 V+ 4.0 Bi-Directional Full System Diagnostic Tool amzn.to/3jzJaHc
3. Automotive Digital Oscilloscope Hantek 1008C amzn.to/3jzJaHc
4. INNOVA 3410 Test Light/Circuit Tester amzn.to/3AoFT4i
5. Fuse Socket Connector Kit amzn.to/3yyB9Zj
6. Fuse Socket Connector Kit, 1 Pack amzn.to/3yyB9Zj
7. POWER PROBE III Clamshell amzn.to/3seWPqZ
8. Lisle 56810 Relay Test Jumper KIT amzn.to/3xLXCRx
9. Lisle 69300 Master Relay Test Jump Set amzn.to/3yNeubQ
MY TOOLS & FILMING GEAR I USE and RECOMMEND (affiliated links):
kit.co/pistonshack
GoPro HERO8 Black amzn.to/3jw7f1s
GoPro Rechargeable Battery (HERO8 Black) amzn.to/3fHVuDS
Screen Protector for GoPro Hero 8 Black amzn.to/39bzX35
DISCLAIMER:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.

Пікірлер: 34

@PulsarTECH 2 жыл бұрын

Wow, it's almost no different than a car oil change, small filter, small engine. Very good!

@PistonShack 2 жыл бұрын

Great point!

@jxp2212 2 жыл бұрын

Nice work! Always good to see the variety of machinery being worked on 👍

@PistonShack 2 жыл бұрын

Thanks 👍brotha!

@premabhakti4034 2 жыл бұрын

Very useful video/ Thanks

@PistonShack 2 жыл бұрын

So nice of you

@ontheroad1930 2 жыл бұрын

Let me guess what next video is coming up. Probably, air filter or fuel filter replacement.

@PistonShack 2 жыл бұрын

You will find it out in 3 days! Cheers)

@engineeringcanada 2 жыл бұрын

Awesome, thanks for the video!

@PistonShack 2 жыл бұрын

Glad you liked it!

@stevem6711 2 жыл бұрын

Good thorough job! Thanks

@PistonShack 2 жыл бұрын

Thanks for watching Steve!

@leogetsall 5 ай бұрын

were on the oil stick should the oil level be, 1st line across or the higher line on the dip stick, good video

@PistonShack 5 ай бұрын

I would keep in between or at the highest mark on dipstick.

@janickvilleneuve6516 Жыл бұрын

Wow, what a great mechanic, just what I needed to know !

@PistonShack Жыл бұрын

Thanks for your kind feedback Jenick! You're so welcome!

@slickrickjones Ай бұрын

Hey! So the oil level on the dip stick should read at the top line or bottom line? Thanks

@PistonShack Ай бұрын

I keep oil level in between L and H marks. Check your machine operators manual for oil capacity as well.

@tybrownsr.4466 6 ай бұрын

Great job!

@PistonShack 6 ай бұрын

Thank you! Cheers!

@jeffreyingrassia4648 Жыл бұрын

Thanks

@PistonShack Жыл бұрын

You're welcome Jeffrey!

@mikelanglais7493 Жыл бұрын

I don’t have that plate covering the drain plug on my 2018 u35-4 . There are no threaded holes to even bolt one up to. Did you add that to that machine? Wondering why they would eliminate this cover. Thanks

@PistonShack Жыл бұрын

Hi Mike. Interesting note. I didn't know that, some Kubota Mini excavators don't have the bottom engine cover. Our U35-4 came with engine skid plate strait from the factory. I am surprised yours doesn't have it. I would definitely make one to protect the engine oil pan.

@johnchamberlin4791 Жыл бұрын

My 2018 35-4 rollbar model didn't have a skidplate either I was disappointed lol

@TheWidowmaker430 Жыл бұрын

My 2022 model doesn't have one I just found out.

@yvesberard9577 2 жыл бұрын

i change fuel filter at the same time

@s.hinote2984 2 жыл бұрын

So don’t fill the filter with any oil? It’ll fill up when you crank machine?

@PistonShack 2 жыл бұрын

Thanks s.hinote29 for your feedback! Cheers!

@s.hinote2984 2 жыл бұрын

@@PistonShack I’m changing my oil tomorrow on my u35 for the first time so I was curious and what all was involved and your video answered all my questions!

@PistonShack 2 жыл бұрын

Perfect, just in time! I am glad it helpful.

@NCISGibbs88 Жыл бұрын

Never saw a clear answer for you. The proper way to change oil when it comes to pre filling is always up for debate. I can say, with 13 years years of experience, though I don't do many oilchanges any more since I tackle heavier jobs. I NEVER pre filled oil filters. Unless if was on a semi, or heavy equipment, only r3ason I did so then, was because some of those filters can hold a gallon of oil. It takes a while to fill up, so you won't have oil pressure. Small filters, there is no need, it fills in 2 or 3 seconds, and you're good to go.