Kubota SVL75-2 Oil Change (How to)

Рет қаралды 37,678

4 жыл бұрын

In this video we show you how to preform an oil change on a Kubota SVL75-2 (skid steer). We show you every step of the way. If you're new to the channel and like content like this please subscribe. If you want to know more about how to operate a Kubota like this check out this video
This is the oil filter we used, Check to make sure this is the one you need also.
www.messicks.com/part/HH1C0-3...
If you like the content that we produce like and subscribe.
Check out are Facebook: Small-Farm-G...

Пікірлер: 37

@billgleason8347 4 жыл бұрын

The camera man is the best part of this👍🏼

@yellowmetaldriver1460 2 жыл бұрын

Good vid. I have a 2021 75÷2 cab wide track and the undercarriage plate bolts are 17mm not 11/16 as you noted. If you try both you will see the 17mm is the correct snug fit. Sae on the underside has play and can lead to bolt damage. In my case it would have rounded the bolts due to how tight they were. The other sizes for radiator and drain plug removal were correct. Had to use a large 1/2inch breaker bar to break the factory torque on all my plates and even radiator bolts. My oil was still half golden and light brown still very opaque. Notbsure but May have to do with quality of fuel ? I use screened ultra low Sulphur fuel with an additive/stabilizer every time.

@eroyslade4197 2 жыл бұрын

Good work on the video. Love my SVL 65 Kubota

@SmallFarmGuys 2 жыл бұрын

Thanks! So do we.

@garygarrett6154 3 жыл бұрын

well done video! Waiting on delivery of my 75-2. Traded my Takeuchi 130. Hope I like this one as much.

@crittersfish4088 3 жыл бұрын

Nice video! Ours just 50 hrs so time for an oil change!

@brandonnguyen4322 2 жыл бұрын

Thanks for the help!

@tomasmunoz2007 3 жыл бұрын

good video man !!

@terrymckinch8587 11 ай бұрын

Good Video, thanks. I do suggest that the bolts and nuts are all metric though

@SmallFarmGuys 11 ай бұрын

Yeah but it always helps to have both sets anyways!😂

@dannyshenry4078 Жыл бұрын

Good job on this video!! Very helpful and complete.

@SmallFarmGuys Жыл бұрын

Thank you!

@goldrushpro Жыл бұрын

Oh my God, I can't believe Kubota designed the machine where you have to go through all of that to change the oil🤦🏼‍♂️

@SmallFarmGuys 6 ай бұрын

It’s easy once you get the hang of it!

@jeffmcgrath1388 2 ай бұрын

There are two drain plugs on the engine oil pan. The front plug will make a huge mess, oil runs down the belly pans. Try to use the side plug when possible.

@SmallFarmGuys 2 ай бұрын

Haven’t had a problem with the oil making a mess from that but as far as dropping the oil filter that I have mad a mess from lol

@samuelbonacorsi2048 Жыл бұрын

Good explanation. Get a goose neck funnel.

@SmallFarmGuys Жыл бұрын

Thank you! And we’ll get on it.

@ronniemarini9754 4 жыл бұрын

Liked and subscribed. I'm looking at an SVL 75 in New England. May I ask how much you paid? Also, any idea how much a SVL 95 will run you? Thanks!

@SmallFarmGuys 4 жыл бұрын

I was qouted 64 for the 75 with a bucket and pallet forks and I think a 95 would have been around 80-85.

@OscarIslas47 2 жыл бұрын

Would this be the same for a 2020 SVL65-2?

@SmallFarmGuys 2 жыл бұрын

I would assume it would be similar but can’t guarantee it

@_Gundy_ 4 жыл бұрын

What type of Oil do you like to use and what Viscosity? Thanks!

@SmallFarmGuys 4 жыл бұрын

Rotella T6 5W-40 Full Synthetic

@eeeranch Жыл бұрын

@@SmallFarmGuyswhat number on oil filter

@sgw7711 3 жыл бұрын

What ratchet are you using? I have never seen one that looks quite like that.

@SmallFarmGuys 3 жыл бұрын

It’s a pass through set from gear wrench

@danou8121 2 жыл бұрын

You use 10w-30 in your skiddy?

@SmallFarmGuys 2 жыл бұрын

5w-40 full synthetic

@Jaredslada25 2 жыл бұрын

Kubota told me on the first 50 hours I just change the hydraulic filter??? Book even says so. Am I missing something?

@omgnothingisavl 2 жыл бұрын

my 2020 75-2 also says to do hydraulic filter only. I think this guy read "oil" and did the wrong thing.

@footer65 2 жыл бұрын

@@omgnothingisavl yeah, he changed the wrong thing. LOL

@bd9494 2 жыл бұрын

yeah at 50 hours just the hydraulic filter is required. Nothing wrong with changing the engine oil early though.

@SmallFarmGuys 2 жыл бұрын

Our dealership recommended it because they know how hard we are in our equipment

@BiggieBobThornton 7 ай бұрын

They’re not 11/16 they’re 17mm 11/16 has millimeters of slop

@BiggieBobThornton 7 ай бұрын

Drain plug is 7/8

@SmallFarmGuys 7 ай бұрын

Thanks for the correction!