Рет қаралды 980
Here is a description of how to use the G2 buttons:
[Power] button: Press and hold the [Power] button to turn on/off the scooter. short-duration click to switch the light; Double click to switch speed gears.
Speed limiter Hold down the brake lever and press the [Power] button 4 times in a row to Activate & Cancel the speed limiter.
[Set] button: short-duration click the [set] button to switch the mile-kilometer unit. press and hold the [set] button to turn on/off zero start mode. The circle icon in the upper left corner lights up, indicating that the starting mode is zero start mode. Press the throttle to start the motor.
(The scooter has two start modes: zero start and non-zero start. Zero start mode: press the throttle to ride; Non-Zero start mode requires a speed of 5km/h to start, in other words, you need to use your feet to help the scooter slide for a distance, and give the scooter a speed of 5km/h to start Riding, in this state, it is impossible to ride just by pressing the throttle.)
[Mode] button: short-duration click the [mode] button to switch the speed mode (1-2-3-1). Press and hold the [mode] button to start or turn off the cruise control.
Cruise control mode: The scooter is set to cruise control mode. Press the accelerator to ride. After the accelerator is released, the scooter will continue to drive at the current speed without pressing the accelerator. Release method: Press the brake, or continue to press the accelerator to accelerate to solve the cruise control.
(Kindly Tip: Please pay attention to safety when using this cruise control mode. The cruise control still will continue to ride when the accelerator is released. To stop, you need to press the brake.)
[Light] button: short-duration click the [light] button to turn on the light to enter the light-use mode