hey man, you are my hero! I bought a Cybergun desert eagle l6 and it is the same structure as the one you showed in this video, it is also amazing that your video is 8 years old and is still helping a lot of people

Such a lifesaver. All these years, and still relevant. Hope you’re doing well man.

U r a life saver.. people are still benefiting from the video.

Thank you when I took it apart I couldn’t fix it and was pissed but when I found this vid I was so happy

bro you saved my life i just got this les than an hour ago and was messing with it and i thought i wouldn’t be able to reassemble it thanks a bunch 😂

Thank you so much for the tutorial. I just got my Deagle, and I heard something loose inside. Turns out it was one of those real tiny springs was not where it should of been, and just moving around. I tried putting it back together, but I got to the point where you had to put that little trigger thingy forward. It put up a bit of a battle, but I finally got it together and it is firing good once again. Please, keep the tips coming. 👍

Life saver dude. The hammer was stuck on mine and I had no clue what happened. Yep that pesky little pin that needed to be moved before putting the slide back on was it.

OMG Thank you so much. I didn't have a thin enough flathead so I just used a bobby pin. lol

This was a freaking lifesaver! 😅 thank you soooo much man

Thank you very much. I struggled a lot with this bugger and your video has sorted it out.

this was so helpful I was messing with my desert eagle and the slide fell off and I couldn't figure out how to make the slide go all the way back.

Bro thank you so much I have been trying to fix mine for months and with ur video it actually worked

Hey man. Thank you so much for your video. I was close to throwing a gun because I could not mount a gun. Thanks to your video then I liked to get it mounted again.

Great video, man. I've had my pistol for a couple of years or so, and I decided to field strip it for the first time today (1/6/19). This instructional made it so easy, thanks!

It worked great for me man thank you again

Oh my GOD thank you so so much. I was so incredibly confused about it not cocking like wtf. This saved me

Lol everyones breaking their guns. Theres a tiny hex set screw on the underside of the slide, that engages the trigger. If you dont screw this in, you will mess up that screw and it will be broken. Make sure its screwed in, then take the slide off, and then when its assembled, screw it back out so the trigger can engage again.

thank you for this breakdown, it really helped.

This video was very helpful. Thank you 😊 I was able to put my desert eagle back together ✌️🤸

Tysm my little brother disassembled my desert eagle l6 it really help me out

Cheers man, just got this thing and it was givin me some trouble. Many thanks for the video. Liking.

Thanks man saved me a lot of trouble

This helps a lot. what kind of bbs dose this gun take I just got it from a friend so I have no clue what kind it takes

You are a life saver! Thank you! it works!

I love this man

Dude, saved my life

To drop that pin when reassembling the slide pull the trigger. There is a video on here shows how that holds the trigger pin down.

Tnx dood, helped so much

Hey there ! Great video ! Helps a lot but dont solved my problem here. Maybe you can help me ? Ive got the poker edition and first it doesnt shoot bbs. Than ive switched the entire nozzle part cause it was damaged. the screw to fix the slide was too deep. Now i got the new parts and i only can shoot in semi auto. I dont know whats goin on here. before i switched the parts, the fullauto works even if it didnt load bbs. Dont know what to do right now.

Thank you so much my friend dropped my gun and it came off the pin you saved me atleast 50$

Thanks for the help I plan on fixing my brother Or having a friend of mine do it

Would it still work without the 2 springs? I lost mine because I didn’t mean to disassemble mine cause I was taking the barrel off to check it

OH MY GOD THANK YOU FOR THIS VIDEO

Useful videos thanks bro

Thank you very much bro 🙏👍

Thank god you made this

where can i buy that screw that block the little thing of metal to fix this problem?

Thank you mate.

Thank you 🙏🏼

Most useful vidgeo on youtube

Thank you so much. ❤️

THANK YOU SO MUCH!!!

Thanks for making this vid. I almost broke my gun!

hi, all my co2 magazine leaks everytime, this gun is unplayable, can we use green gas magazine?

My bolt (the part that pushes the bb has worn out😢 where to get replacements?)

Merci beaucoup grâce toi on a réussi à régler un problème 💪😋👌

Thank you so much

My slide moves just fine but the trigger dose not do anything and the little pin is like impossible for me to mess with also I messed with the hex key a little before hand cause somone told me to to

OMG ty sooo much

Ty so much brother

helped alot thx

The hammer doesn't come forward when I click the trigger

what if you held the trigger while you slide it back

What's the name of small screw I can't find it

Jeez putting the slide back was a pain on the buttcheek hole. I got so frustrated i just slid it back really hard and I guess it somehow started working again. I just needed to lubricate the damn piston and didn't realize I could just lock the slide back and do it from the maghole but I guess I at least now somewhat know how to take it apart and put it back together. *slowly begins to regret not getting another 1911 or a hicapa*

You didn’t mention anything about the little screw in the bottom of the slide when pulled back. Screwing that in prior to disassembly is key to doing it and remembering to screw it out again, or the hammer won’t release. There’s no “fidgeting” with a screwdriver to push the release to get the slide back on. However, I did like your close ups.

There's actually a tiny slug screw in the underside of the slide that goes right above that pin you're struggling with. Instead of messing with all that, all you do is rack the slide back and tighten the slug screw in just a little so it sits flush, Then the slide comes off smooth. Once you're done, you just reassemble the slide, rack it back and undo the screw so its level with the two ledges surrounding it and you're golden. Really no need to make it this complicated.

Now I have another problem bro, my deagle doesn't want to shoot, it doesn't put a bb into the chamber, what can I do?

You save me! I love you😭

Can someone send me a link for internal parts for this gun. Thanks

I have the slide problem , but i cant move the slide foreward or backward the slide is completly stuck Any solutions?

It's a bit outdated but I also works for cyberguns de just don't tighten the tiny screw on the slide all the way in

So my gun won't fire. The slide moves back and forth fine, but when trying to dismantle, the back half of the slide doesn't come off in the same way it doesn't go back on. Does this mean the pin is stopping it again? The trigger works fine, but when the hammer goes down, all I hear is a click, with no firing.

Merci mec

I know this is an old video, but please help. My slide won't rack back, even after multiple disassemblies and reassembling. I have the full auto/semi auto version.

I do the whole little pin thing but it still wont slide back

Thank u

Hey i hope you still can help me, the little metal Thing you gotta hold with that little screw im doimg it but it really wont slide back do you know why?

Can you make it for the new version it's the 50. Ae

I recently got my KWC DE.50. This Deagle truly do not have a spring that makes the blowback air cylinder/nozzle retract (as in most of KWC's blowback BB guns)?? I just found it odd that the nozzle piece just sat loose there in the chamber when I racked the slide back.. Have not stripped my blowback unit - but this seemed to have two springs that seemed to be more like working as shock absorbers, rather than to retract the front nozzle backwards in again.. Nothing wrong with it. Just merely asking for somekind of confirmation for this..

You saved me

so my inner barrel is sliding out when shooting. is there a way to disassemble the barrel?

Thank you so much i thout a bb was stuvk in the barrel so i took it apart 😂

I just got mine and flipped it up to full auto and nows its stuck in that mode haha... Still have not a chance to fire anything, do you think its broken?

I Can't do plz in just got it today im begging

the hardest part is taking apart the trigger mechanism and putting it togheter again XD

So i just got this gun and tried to shoot it earlier. The gun seems to cycle correctly on semi, but no BB’s are shot at all. And then on full auto the slide locked after around 3 cycles. Any ideas? i’ve already put in the return request but just wanted to see if there’s a known solution for my problem

What could be causing my barrel to not slide back in and line up properly

Thank I made the fatal mistake of taking all apart and couldn't get it back together lol!

My problems with the mag or so thing when I put 20 rounds in and try to shoot nothing comes out. But when I put 5... like exactly 5 not 6 five lol Then the guns works perfectly Only with 5 rounds can't shoot 20 or 6 just 5 Anyone now how to fix this?

If you look on the bottom part of the slide, the ridge inside where that metal piece you have to hold down is, there is a screw that you need a allen key for. screwing that down makes it much easier to put the slide on. If anyone has any questions, please comment I'll be happy to answer.

Im stuck on the rest of my slide wont come off…….

Thank you mais il faudrait mettre en français

IMPORTANT!! You forgot to screw the little screw under the back of the slide !!! You will break your gun ! 😲

do you recommend a user to buy it?

Thank you so fucking much omg you saved me from fucking raging🤧 much love from osama

Marui compatible?

Thank you so much for this guide! The gun comes with dick all when it comes to instructions. 10/10 video. Really buttered my corn flakes.

I dont know what i do if i didnt find this

My slide dosent come back what do i do

Idk why they thought it’s a good idea to make a gun where you have to do a ton of work to get the slide back on what a bunch of bozos 🤡

Mine came from evike and the full auto didn't work brand new outta the box trash pistol I hate evike for sending me this trash I paid extra on shipping 2 they robbed me for 160 plus dollar straight to the the trash

My automatic doesn’t work