Do you offer a stump grinder auger option that works for your smallest excavator? And if so, a demonstration would be awesome. Thank you

Can you put the material bucket on backwards and use it for a shovel? Makes it a lot easier to scoop out of a pile.

I would have liked to see you use the thumb with the rake to move the pile you created in the video.

good explaining and good control the excavators... thanks

I like that quick hitch.

Would you ever consider doing a video demonstrating your forklift attachment for your excavators maybe on an XH26 or XH42? I'm curious to see how the backstop of the attachment works without hitting the dipper stick. I also think there are many people who are unaware that such attachments exist for excavators and that it essentially turns them into a crane forklift.

Can you split fire wood ‘ maybe with a modified claw?

Do you have a T-Post driver for that?

That is the color I want (white), easier to see the dirt. Great video. I have like 1,000 small mesquite trees to remove from my 55 acres.

Would be cool to see how the pallet forks work on an mini excavator.

i like the wide tracks great video

are mini excavator attachments universal or proprietary? Thanks!

Nice, wish there was a Kymron dealer around the northwest GA area.

I feel like a small front end loader would do a better job of moving an above grade pile of soil or gravel. Excavators seem to be slow and clumsy at that task.

Looks like the sanding bucket would be good for sifting compost, too.

Anything coming to Texas?

Here in where I am in Texas we have a lot of rock so any post holes would need to be drilled through some hard rock. I do like the hydraulic hammer though.

I have seen stump grinder “screws” that resemble an auger but shorter and designed for skid steers to push down through a stump. Do these Kymron’s have sufficient hydraulic flow and power for one of these grinders? I’m guessing it’s similar to the auger.

Hello 👋 We mill lumber with bandsaws and chainsaws! Also build chainsaws. We need a machine for moving around 1,000 lbs logs. We are located near enid Oklahoma! We will mainly just be logging or loading the sawmill!

Those screw hitches break. I mean the bolt snaps. Iv done about 5 of them in 300 hours professional hours. Bolts are easy enough to source from a bolt store but it’s still annoying when it happens and doesn’t look good when you’re on a job. The teeth on the buckets are on upside down so you can’t clean out a bottom of a trench properly. The augers are a joke, mine came with the cutting tip on upside down and the cutting edges arnt positioned properly so it’s like trying to use a blunt drill bit to drill into steel.

I liked the look of that mini dumper,, are you planning to have those in stock? Also, how come you don't do main pin thumbs on any of your machines?

OK EXELENTE😨

Missed using the thumb

I can see were quick att.would mess with the digging force.

Id like to get a hyd thumb for my agt.ive been looking everywhere. Do you sell them separately?

Looking forward to a dealer in southern lower Michigan, maybe around Kalamazoo or so.

If you are going to buy the larger bucket. Spend the extra and get the tilting bucket. And the larger sifting bucket.

Will the attachments work on other mini manufactures?

When digging the angle trench once the bucket is in the ground the way you want the trench just drive back and it will continue the trench. Of course you had the tree behind you. Nice little machine

Is it possible to mount the bucket upsidedown? (entrepreneurly not indirectly)

When will you have a video of the Zh12g excavator?

Does the 2812 have safety switches if you got it a tilt

is from JACK HAMMER¡¡¡¡

That seat looks pretty tight. Anyway to slide it back another six or eight inches?

Kudos for actually showing these off instead of just depicting them in their unused glory!

How much for the white one

Do you have any KYMRON RH14G with he pilot controls for the same price

Are these Chinese parts assembled in U.S.?

What powers the jackhammer ?

Are all of these machines built in China?

would you be willing to Partner dealer with me I have 3200 sq ft shop and full-time mechanic and parts lady with salesman I'm a Husqvarna dealer. in northern NY

Can i upgrade xh20d to a 2 speed?