Apex RC remote auxiliary channel on amazon. This car is awesome. So many comments when I’m out driving. Stay safe!

on kyosho website part # 97054-4B for front (4 bulbs) and for rear part # is 97054-2R-B (2 bulbs) . or u can find other 5mm bulbs on amazon

Apex RC products , auxiliary channel on/off #9025

yes correct

Can you share a link. I can't get hold of Kyosho parts here.

@@power2drum link in the description or Amazon has light kits too that work

You should see the small screws around the cover for it

Link are on description

You can modify tires, maybe buy a clear body and paint your own color, change out the spur gear to add some speed…

The brackets should have come with the box, the extra accessories that come with the car. You prolly need to contact kyosho

Hi Jared I can only assume if you can connect the tamiya light kit to the 3rd channel on the module here on the chevelle then in theory it should work. I never personally seen or did it from a tamiya kit. And I copied links to those products on my description section on the video. That was a good point you suggested thanks!

for this light install set up shown here, no, the back lights don't light up. front lights and rear light just stay on continuously. When you switch that 3rd channel, they all turn on off together. I haven't seen a light mod for back lights lighting up when reverse yet, but that would be pretty sweet. Pretty sure it could be done. ( now your just giving me ideas dam lol )

@@ysar60 yeah i saw someone who got that to work a while ago so i was wondering if it was possible.

@@ysar60 Traxxas has what's called the pro scale lighting kit for the TRX4. I got the set for my 79 Blazer. It has right and left turn signals, low and high beams, brake lights, and reverse lights. The complete kit with the Bluetooth link is made up of 4 kits and for a total price of $200. well worth the price for the realism look.

Just 1 aux channel adapter

on kyosho website part # 97054-4B for front (4 bulbs) and for rear part # is 97054-2R-B (2 bulbs)

@@ysar60 ordered this morning. Thank you.

If you use what I put on the link it should work like other people have commented , if not maybe you have a defected part and ask the company to replace but sorry to hear that

@@ysar60 Thanks for the reply. I used it in channel 3 on the receiver with the lights but when I press the controller switch up and down it doesnt do anything, no lights at all. I tried it in channel 1 and 2 and the lights turn on and off using the wheel and trigger. I know the switch on the controller works because I plugged the steering servo into channel 3 and can switch full lock both ways using the switch. So for what ever reason I just cant use this on/off switch on channel 3.

@@Mike-uz7zv wow sorry that it didn’t work still.