Thanks man, I kinda like it too; might keep em friction style for now! I appreciate you watching!😊✌️

It was a good time, thanks so much for watching!😊✌️

Yessir, very good for beginners! It took to a brushless conversion nicely too! Thanks so much for watching!👊😊✌️

Thanks for your support Steve; that means a bunch!😊✌️

Ahaha!!🤣😂 I was thinking my other one was too long so I went with short and sweet! Thanks Dave!😊✌️

Thanks man! I appreciate your support!😊✌️

Definitely a solid entry level rig! Thanks so much for watching!😊✌️

Most likely the plastic pinion gear it came with!🤣😬 Thanks for checking it out!👊😊✌️

Hi and thanks for watching! Are your spur and pinion gears the same pitch?

Hi and thanks for watching! Yes the units are bound from the factory!😊✌️

Hi Omar! If I recall, the stock plastic pinion gear isn’t held on by a grub screw. I pulled it off with plyers because I was just throwing it out anyways. Thanks for checking it out!👊😊✌️

Ok that’s what I figured because I was confused how it even came off. Thank you so much for letting me know. I also noticed the stock battery doesn’t last long about 10-15 minutes at most, I’ll definitely be replacing it with a better battery.

No problem, glad to help! I ran 2s lipo on my right away for better run times.

Hi and thanks for watching! Are there any differences in the 2.0 besides body color? I’ll check out the group!👊😊✌️

Newly designed gear box eliminate need for messy backlash adjustment. *Precision modules on differential gear realize high durability. *Fixed length sus arms eliminate need for precision adjustment of alignment. *Newly designed servo saver protects the servo from crash impact and improves steering feel. Not a whole lot, the shocks also come filled. It’s been a good truck for me so far.

I was actually looking at these on Tower earlier today but they didn’t have any technical info yet.

rc.kyosho.com/en/topic/monster-tracker-20/34404t1.html

​@@abelphotography1875 amazing! The gearbox support 18-19-20 mph ???? Destroyed gearbox with 21 mph?

Hi and thanks for watching! It’s a good truck for the money! I did put a brushless system in it, but that’s all.👊😊✌️

Hi and thanks for watching! Unfortunately I’m not fluent in Spanish.😔

How durable is the steering servo and esc? playing it in normal conditions and without adding more powerful batteries? How often will I have to replace the esc and the servo? I hope you help me I would really appreciate it

I’ve been running mine brushless and haven’t had any issues with the servo. Most Rtr servos are on the weak side. The esc will handle 2s lipo power all day long, just don’t run anything more than that! Hope this helps!😊✌️

@@HaydadRC thank you

Hi Robert! Yes it is! And she handled a brushless swap with ease! Thanks so much for watching!👊😊✌️

Gonna keep it stock for now except 2s and I’ll be putting a metal pinion in. Thanks for watching!😊✌️

​@@HaydadRCHappy year friend! Do you think the mt can withstand speeds of 19-20 mph for long periods without damaging the gears and differential?  😮

@@zoridor16 yes, I think it’d be just fine!

😮 We might see a brief 3s run down the road! Thanks bro!😊✌️

Hi and thanks for watching! The esc is only rated up to a 2s. If you run 3s, it’s likely you’ll damage the esc.

@@HaydadRC ok, thanks a lot for the fast and precise answer. So if i swap the esc with a more powerful one I might use higher voltage?

RICHARD Julien No problem. You can do that but you’d also run the rust of burning out your motor too. I don’t remember but I think this is only a 20t motor. Keep in mind the pinion gear that comes with this is plastic. If it were me; I’d keep it on 2s only and change to a metal pinion gear. You can always gear up a couple teeth on the pinion but you have to be careful with that too; the more teeth you go up, the warmer your electronics will get. You can always end up putting a mild brushless system in it for pretty cheap.

@@HaydadRC I've checked it's a 22t but still not very powerful. I'll have to think it through. Maybe a bigger brushless engine with sensor will do it combined to a metal pinion? Do I have to change the spur if I put metal pinion?

RICHARD Julien No need to change spur gear. Remember with brushed motors the higher the number of turns, the less speed. So a 15t motor will increase speed over the stock 22t. Conversely, with brushless, the higher the kv #, the more top end speed. If I were to do it, I’d go with a 4000-4300 kv sensorless system.

Hi and thanks for watching! In stock form I’d guess this truck maxes out at around 16-18mph.👊😊✌️

@@HaydadRC ok thank Can i have the links please The car is good?

www.ebay.com/itm/Kyosho-Monster-Tracker-Factory-Assembled-RC-Monster-Truck-RED-34404T2/264586134100?hash=item3d9a900254:g:nkgAAOSwru1eDi80 It’s a good beginners truck!

@@HaydadRC is there a faster option?

Timour Dubois you mean a different vehicle?