Рет қаралды 283
I was tired of walking back and forth when setting a home position on the other side of the table... so I found a new solution to the problem.
00:13 Intro
02:18 First possibility... USB adapter
03:17 My Solution
03:42 LinuxCNC Terminal (Identify Joystick)
04:12 Modification of the pyVCP Panel
05:54 Old vs. New Panel
06:08 Updating the custom_postgui.hal file
09:11 Testing it out
10:52 Explaining the buttons
11:38 The silly AI outro song...