In this video we show our inhouse designed side "molle plate" for the new Land Rover Defender. This military style molle plate is designed to facilitate carrying loads on the side of your Land Rover Defender 110
Пікірлер: 153
@mainermike694 ай бұрын
Simon, you are so entertaining! I watch old KZfaq videos of your product placement versus watching television at night. You’re quite the celebrity here in America.
@richardw79593 жыл бұрын
Finally, the new Defender is starting to look worthy of its name. No longer just another Chelsea Tractor, you are turning it into a beast! I hated the new Defender when it was released but your videos have caused me to develop a soft spot for it now!
@L6633 жыл бұрын
Thanks for the comment Richard... I too must admit I purchased the new Defender more as a business decision but it has been a real blessing over lockdown and I am now quite attached to it !
@turnbull3213 жыл бұрын
I wasn't sure I liked them at first but now I see how it works and the options it gives. Nice!
@k7cfo2 жыл бұрын
Purchased both LEFT & RIGHT, thank you so much for this video
@alanottley3 жыл бұрын
Very nice design, Simon. Well done to you and the crew!
@L6633 жыл бұрын
Many thanks!
@b8ascrub2 жыл бұрын
Just ordered mine last night and it shipped today!! You guys rock!! Super fast!! I’ll be updating my Instagram once installed next week! Can’t wait!!
@nickjennings83173 жыл бұрын
Super job Simon. I will go with the offside one. I am going to mount a High Lift Jack when needed. Cheers Non Stick Nick
@L6633 жыл бұрын
Hi Nick - I will get to your email tomorrow...
@roy05093 жыл бұрын
Love it...these Molle plates looks awesome..great built:-)
@L6633 жыл бұрын
Thanks - we wanted to do something a bit different ! I am not sure everyone will like them but so far we have had a good response !
@davidhill16003 жыл бұрын
As always a great demo 👌
@L6633 жыл бұрын
thanks - sorry I just noticed i left the mid roll adverts on... taken off now.
@jongrall3 жыл бұрын
Great video! Straightforward installation. Really looking forward to the v2 Molle Plate that is (hopefully) compatible with Rotopax mounting points. Will buy for sure.
@beyondroaming Жыл бұрын
Hi, We mounted bison kanister mounts to the molle. Worst case you can also just drill some holes. Works perfect - we have a video about it on our channel
@jerrygreene71392 жыл бұрын
Love the videos. You do great work. I’m in the USA and I bought my first accessories from you and they arrived this week. Very exciting! By the way, I was in the Army and the MOLLE gear we had we pronounced it like MOLLY. Maybe just a difference between countries.
@L6632 жыл бұрын
Thanks for buying our parts and glad you enjoy our videos ( there are not for everyone ) I have been corrected and now we do indeed refer to them as MOLLY plates
@paulkedwards3 жыл бұрын
Excellent idea. I could see lots of different future accessories being thought of such as a slot in side table / shelf for camping. For the roof rail fixings it might be worthwhile also adding some thread lock as a belt and braces fix to resist potential movement / loosening when the hoops are used as fixing points and a suggested torque for the side fixings. :-)
@L6633 жыл бұрын
Hi Paul - thanks for the comment... yes i hope the molle plate will inspire some creative thinking both for its use and other items... I need to check the Land Rover torque settings for the ladder / lunch box and use these.
@vanikon27843 жыл бұрын
Would be great if you could mount Maxtrax to the Molle plate. Also maybe the rear side panel for the switches, consider a lockable door to access the switches or a space for recovery gloves, shackles or tyre pressure gauges etc.
@davidg8473 жыл бұрын
Really really nice molle panel . Hope you can provide other surface finish, like matt texture powder coating as well. Love ur video.
@L6633 жыл бұрын
Thats a cool idea - how about a raptor type finish ?
@neilfaulkner18083 жыл бұрын
Hi Simon, just a thought with the template - with the waist cover off, If you put the two bolts loosely in to hold the template it would line up for the third to be marked/drilled rather than keep taking the cover off and on? Great product and video - keep them coming.
@snakeeyesman3 жыл бұрын
Have you seen the rear mounted ladder? this would work well with this molle plate.
@LucDef1103 жыл бұрын
A fantastic idea guys and well presented, I love your style and humour! Have you considered making Mollies for the ‘real’ Defender? I’d buy a pair for sure :) Thanks!
@causa20092 жыл бұрын
It's a good idea
@bugjuicer3 жыл бұрын
nice!
@Nedbruce3 жыл бұрын
This is great. Could you please do a video regarding mounting a table on the rear door which I’ve seen some people doing and also is an option on the new Ford Bronco
@L6633 жыл бұрын
Funny you should say that we are working on that ... we have one in the workshop that we are looking to modify - we are copying "non stick Nick".
@WizzardPrang3 жыл бұрын
These look good. Not trying to give you more work but... Any plans for a tailgate table? A few owners have modified one designed for the wrangler, uses the existing bolts on the tailgate trim. Cheers, Steve. 😉
@67Deluxe13Window3 жыл бұрын
Simon, have you seen lucky8's "plastic square" delete? I think your Defender would look amazing now that you have the MOLLE plates on each side if you were to delete the white squares on the rear windows. . ..
@hyperraptor54843 жыл бұрын
Those Molle plates would be great for Discovery 3/4 too! Are you considering a version for those models?
@WyliesOutdoorWorld3 жыл бұрын
I second this! if they were available for the disco I would buy them straight away
@jasontibbitts52313 жыл бұрын
Got my vote too
@hmrMedical3 жыл бұрын
Following and waiting.....
@cadebriar99213 жыл бұрын
Pro tip: watch movies at kaldroStream. Me and my gf have been using it for watching lots of of movies during the lockdown.
@derrickjohnny93503 жыл бұрын
@Cade Briar Yea, been watching on kaldroStream for since november myself =)
@MrRaveDark3 жыл бұрын
Really cool to see these plates now Simon! I know you mentioned Rotopax as a potential fit earlier, did you make that work for these? Would really love the ability to fit those on a plate like this. Keep up the good work!
@L6633 жыл бұрын
I am trying to work with RotoPax... I love the the product but i am in a queue to become a distributor !
@justinsmith62963 жыл бұрын
If your going to put the switchs on that rear panel try making a new panel with the switches recessed and have a power isolation switch inside the back door to kill all power to the panel, so someone can't just walk passed your car and turn the lights on and kill your battery over night without you knowing, even if you just add a relay in each circuit and a single power switch to power them all on, BTW love the mollie plates but please do them for other models and even a universal flat one so people can build there one system, great vid
@L6633 жыл бұрын
Hi Justin - we hear you.. the plan is that this is the first in our series of products for multiple vehicles and also we plan to do more roof rack accessories for the Defender.
@rparkes10982 жыл бұрын
MollEEEE !
@zelenizub20363 жыл бұрын
Is there any chance that you can do subframe lift video. How hard is it to do, because that is potential game changer.
@e30renner6 ай бұрын
Hey, I use the frontrunner roffrack. So my question is, if we bring the upper two “flaps” with the wholes in an 90 degrees angle, should it work, with drilled wholes in the roffrack rails, that it fits with screws? In theory it sounds possible. Any experience with that? If not, in January I will start a try. 😊
@crivera823 жыл бұрын
Can you make these for the Disco 3/4? I would by a set of 2 in a heartbeat!
@pjvdbrink2 жыл бұрын
I have a Fully Black NewDefender and have installed RH Molly plate. Do you have the bolts also in black ? Thanks 🙏
@HQBProductions3 жыл бұрын
You could make a flag pole attachment for the plate so that multiple owners could drive in a Military style procession and maybe sell one to HRH to carry her flag when she is travelling! I hope you sell these to adventurers Worldwide! Stay safe! Richard😃😃😃😎😎😎😎
@DylanGriffith3 жыл бұрын
I love these videos and I've already bought stuff off you. Keep up the good work. In the video you mentioned that you might have something to mount a petrol can here. I wonder if a petrol can mount will attach to this or if you will design a totally different part for mounting a petrol can. I really like these but I'm trying to decide if I should wait to buy something different from you to mount a petrol can or if I should just buy this now and there will be something else later that adds on to to this for petrol can mounting. It would be cool if I can just stick a petrol can onto this thing when I need it then I can use it for other purposes when I don't need a petrol can mounted on there or just purely aesthetic when I don't need anything on there.
@L6633 жыл бұрын
Hi - we are planning to fix a rotopax mount onto the plate directly - we will need to make sure the load is spread correctly and test it with the weight etc. The advantage of the Rotopax cans is they are slim and so will not stick out too far.
@67Deluxe13Window3 жыл бұрын
Also, do you have a video or details on the black upper corner bit which looks like there is a hook on it? It has the Green Lane Association sticker. . . I noticed it on the Air Compressor video. . . Looks interesting
@67Deluxe13Window3 жыл бұрын
A GoPro mount! Is that plate stock (where the GoPro mount is affixed)?
@patrickdaubert8 ай бұрын
Morning from California! Do you have a video that explains the connections and clear pelican box on that left panel of the Stig?
@L6638 ай бұрын
Sorry for slow reply This video explains it in part kzfaq.info/get/bejne/oNxlpsZq2rLJqKM.html
@richgooding21313 жыл бұрын
This is absolutely awesome! I would be interested in putting lunch boxes on each side so what would that take? I would like to see those options when its ready for production.
@L6633 жыл бұрын
The RH is easy - just need some M6 connector nuts and the bottom mounts are the same - just need longer bolts The LH side we just made a template for ... video coming soon !
@orderstudios40882 жыл бұрын
@@L663 any updates On The template
@user-sz8ux1px3r Жыл бұрын
Just curious, is it possible to install the side ladder and the molle plates at same time? Must be really cool!
@L663 Жыл бұрын
We did look at this but its not going to be easy - really needs a half molle plate to go alongside the ladder
@mitchellstark28903 жыл бұрын
Can I still fit my ladder to the “MOLLE” pronounced Molly plate ? I just ordered a pair and forgot to ask ..........love your work ❤️
@beyondroaming Жыл бұрын
No that wont work since its using the holes already
@HughSmith3 жыл бұрын
You need to create something for the MaxxTrax recovery boards. There are NO accessories for the roof rack. I had to make my own fittings for an Awning.
@richardweerasinghe32963 жыл бұрын
This looks cool. But I think a maxtrax holder would be more useful and look even cooler 😀
@L6633 жыл бұрын
Your not the only one....
@DeurenCoUk3 жыл бұрын
Look brilliant, can you tell me if you notice much wind noise with the roof rack, lunch box etc?
@L6633 жыл бұрын
Its a good question - most of the noise seems to be coming from the roof rack at the moment but i have not driven it along the motorway yet
@ubonfante3 жыл бұрын
I mounted it yesterday and drove around with it all day today (LH drive, RH plate.) I don't have roof racks, ladders or lunch boxes. I can't hear a thing at any speed, if the plate makes any noise at all it is definitely not enough to hear it over tire an engine noise. It is such a thin "blade" that generates basically no drag or wind noise regardless of speed, plus I am sure it helps that it is located on the opposite corner of where I am sitting.
@L6633 жыл бұрын
@@ubonfante Hi Umberto - super happy to see you are pleased with it - let me know if you want me to send you 4 of the hoops that fit to the plate.
@nanozic2 жыл бұрын
Possible to mount this to a 90? On the site it specifies the 110 only. Feels like something perfect for a 90 since the smaller model has to be more creative with the use of space than it's bigger brother
@L6632 жыл бұрын
I need to try and get my hands on the 90 to study it... I have just looked at the fitting for the side gear carrier and its the same on the 90 as the 110 so the RHS Molle plate should fit as it uses the same mounting points but I have not tested it. accessories-instructions.landrover.com/enUSA/new-defender/G2409777
@defenderoff-road3 жыл бұрын
One other question Simon, when the Molle plate is installed and if the ladder is installed will there still be room to install a jerry can?
@L6633 жыл бұрын
I need to check this out..
@farann Жыл бұрын
Any hope to have that for the new defender 90 as well? Or would this work for 90 with OEM roof rails?
@L663 Жыл бұрын
We have these for the 90 and plan to do a video really soon !
@user-tp8xf3vi1d Жыл бұрын
wondering if there is any noticeable wind noise or felt buffeting at highway speeds without gear mounted?
@L663 Жыл бұрын
It actually seems to make no difference.. and i know i would say that as its my product... or maybe it because i cannot hear any noise over the rook rack noise !
@arahagop3 жыл бұрын
Simon, will be selling the Bumper Strip that protects the edge as well?
@L6633 жыл бұрын
Its coming... the tooling is made and they are in production - then add a few weeks for shipping !
@JerryOvesen3 жыл бұрын
Very nice! Is there a way to adapt this to the LR4? Rear windows too big? Not enough support on that rear quarter to put rivnuts in?
@jvd86983 жыл бұрын
Check out the KZfaq channel called LRTime
@L6633 жыл бұрын
We do plan on doing this for the D4 so that you could then add the gear box to the D4
@JerryOvesen3 жыл бұрын
@@jvd8698 I saw that! Christian and Vera's mounting bars are great and I was thinking about doing that too.
@JerryOvesen3 жыл бұрын
@@L663 Great! I look forward to it. I can think of a lot of things I might want to put on those panels. I have pictures of rotopacks and recovery boards running through my head.
@seankarns3 жыл бұрын
Just received mine, looking forward to getting it installed over the weekend. I've tracked down the LR strap down rings you mentioned, but having trouble finding the quick release rings. Any info on a source for them? Thanks!
@L6633 жыл бұрын
Hi Sean - send an Email to customer service and I will send you 4 for free ! Simon
@seankarns3 жыл бұрын
@@L663 Amazing!
@L6633 жыл бұрын
@@seankarns Let me know what you think - they seem to rattle a bit so you may not want them attached all the time or they may need a bit of rubber adding to them - I have not had time to look closely yet... but for free you cant complain !
@seankarns3 жыл бұрын
@@L663 Absolutely cannot complain! I'll write up my thoughts and perhaps a way to solve the rattle issue on landroverforums and defender2.net
@defenderoff-road3 жыл бұрын
Hi Simon, can you still install the ladder with the Molle plate installed?
@GSXR03113 жыл бұрын
Doesn’t look like it but I’ll let Symon answer. If not lucky8 makes a rear mounted ladder.
@orderstudios40882 жыл бұрын
Any updates on rotopax or how to install recovery traxx
@L6632 жыл бұрын
Sorry but Rotopax still will not supply these items to me !
@orderstudios40883 жыл бұрын
I ordered the kit just got it yesterday where can I buy that rivnut tool I can’t find it
@L6633 жыл бұрын
Hi - we have this on out website www.powerfuluk.com/m4-m5-m6-rivnut-nutsert-tool-insertion-tool.html
@orderstudios40883 жыл бұрын
@@L663 thanks lads I installed it without it but will Order this to attach the final bolt
@michaelgirardi3 жыл бұрын
Is the plate also compatible with the roof rack from frontrunner?
@beyondroaming Жыл бұрын
The small one yes but the big frontrunner rack not since the original rail is removed
@mitchellstark28903 жыл бұрын
With my full cargo barrier I can now secure the cargo area with two molle plates #armoured 🚙 car. I might need one for the rear window as I cant see shit out of it anyway😎
@orderstudios40882 жыл бұрын
Do you have a link for the cargo barrier
@mitchellstark8402 жыл бұрын
@@orderstudios4088 its a Land Rover original one available directly from L.R.
@orderstudios40882 жыл бұрын
@@mitchellstark840 is it hard or is it that soft one
@mitchellstark8402 жыл бұрын
@@orderstudios4088 Hard
@mvirdi23333 жыл бұрын
🙏🙏
@L6633 жыл бұрын
Hi !
@HughSmith3 жыл бұрын
Hey boys, did you colour the Box ?
@L6633 жыл бұрын
Yes we did - the silver does not work for me !
@ToanNguyen-mn5jk3 жыл бұрын
@powerfulukltd do you know if the LH plate will fit under the ladder?
@L6633 жыл бұрын
Hi - we have looked at this but it does not seem possible If there is demand for this we could makea half molle plate that could fit to the LH side of the ladder
@deepakehtskan45183 жыл бұрын
@@L663 i would definitely be up for one of these.
@AndyK.13 жыл бұрын
Better start making some 130 stickers. 7 seater
@L6633 жыл бұрын
Just seen this ... seems the Defender is doing well ! which does not surprise me as I love mine despite a few issues along the way its a great car !
@CryptoRancher6 ай бұрын
Can you fit rotopacks on it? Or a hilift jack Mount perhaps
@SimonBetty3 жыл бұрын
Question is.. can you mount the ladder to the plate :P
@beyondroaming Жыл бұрын
Nope, unfortunately not
@GoldenGateCreative3 жыл бұрын
Can you mount Land Rover’s ladder on this plate?
@L6633 жыл бұрын
I have tried but not worked out a way to do this yet
@oldapachesquaw3 жыл бұрын
@@L663 No problem. On a side note, it would be great to see if you're able to find a way to get the Land Rover ladder's top cover to be removable. You could sell a retrofit kit to make that top cover piece come on and off easily. I'd buy it.
@fernandoinberlin3 жыл бұрын
⭐️⭐️ Gentlemen, my shopping list is getting bigger and bigger. As a European😓, can I order from AMAZON or e-bay ? 🐣 Do you still deliver to SWITZERLAND ?⭐️ Best regards from MILANO 🇮🇹
@L6633 жыл бұрын
Thanks for he comment - we are looking at resuming shipping to EU soon. We are still finding a lot of items getting delayed on the few parts we do ship to the EU You can Email contact at powerfuluk dot com and the office will try and arrange a DHL quote for you.
@ToanNguyen-mn5jk3 жыл бұрын
Just check your site, I don't see it under "New Defender" is not not available yet?
@L6633 жыл бұрын
Give me 24 hrs !
@ToanNguyen-mn5jk3 жыл бұрын
@@L663 just saw them on your site and swoosh just like that they're out of stock 😱
@L6633 жыл бұрын
@@ToanNguyen-mn5jk Yes i just needed to finalise pricing... I wonder who our first customer was !
@ToanNguyen-mn5jk3 жыл бұрын
@@L663 if you check, that would be me 🤣😎, just ordered my kit!
@kevhov52922 жыл бұрын
How much does each cost and how can I order it?
@L6632 жыл бұрын
It is on our website www.powerfuluk.com/catalogsearch/result?q=lrdp660
@georgeyboyhowe16853 жыл бұрын
thats brilliant but would take me 5 mins to nick it needs security bolts atb pete
@L6633 жыл бұрын
I was thinking about M10 shear bolts on the top mounts !
@AndyK.13 жыл бұрын
Gearbox on your mind ?
@L6633 жыл бұрын
I forget what Land Rover call it... gear carrier box etc ?
@AndyK.13 жыл бұрын
@@L663 I thought you called it a lunch box, but maybe that’s not correct
@orderstudios40883 жыл бұрын
Has anyone mounted a rotopax to their molle plates
@L6633 жыл бұрын
Not anyone that has sent us a picture yet !
@user-tk3gy2ts5g Жыл бұрын
これ商品欲しいです。 買いたいです😊
@L663 Жыл бұрын
www.L663.uk
@manorbleak13 жыл бұрын
And what is the point of this?
@L6633 жыл бұрын
We are going to use it to move the gear box carrier from the RHS to the LHS But it looks cool / adds security and can be used for carrying water and fuel on an expedition etc
@neillthornton11493 жыл бұрын
Oh Simon... take it from this 20 year US Navy Veteran and 4 Rover Owner (including a new 110) who helped test the MOLLE system... it's not a "Maul" plate, it's pronounced "Molly" like the girl's name. Every time you say it I cringe.
@L6633 жыл бұрын
I stand corrected sir ! Thanks for correcting me !
@limestonemedia3 жыл бұрын
It's pronounced "Molly".
@L6633 жыл бұрын
Yes I have now been educated ! thanks for pointing this out !
@AndyK.13 жыл бұрын
Can I have my free T shirt or hat for you not including links please to other videos 😀
@L6633 жыл бұрын
OK deal !
@trev_grhm3 жыл бұрын
Spotted one missing at 12:00
@L6633 жыл бұрын
@@trev_grhm Thanks for checking but for me it does appear
@roberttruman83323 жыл бұрын
First 😀
@L6633 жыл бұрын
Yes you are!
@hunterbiggums59607 ай бұрын
Does the mounting tool come with the plate?
@L6637 ай бұрын
The rivnut tool is not supplied with the plate but they are readily available
@hunterbiggums59607 ай бұрын
Just bought R & L side for 110. Very excited to install. Are the rivets supplied? If not, do the instructions include rivet size so I know what to buy?
@L6637 ай бұрын
@@hunterbiggums5960 Yes the rivnut is supplied ( M6 ) you just need to get an M6 rivnut tool !