I had it included in the Defender - I found it under boot floor after a couple of weeks of driving 😁. I find it very useful in daily driving and have in on almost all of the time.

My Nextdoor neighbour is called what this is …. Annette 😂😂

I installed the load space partition -full height. It looks good and useful if you have a pet. the downside is you have to remove it if you want to load stuff (big tall boxes) or enjoy camping 🛌 🏕 🚗

LR probably buy those in for about a fiver each. At £40 it might be a fair retail price and worth buying, but £145 Plus VAT = £174 total? Pull the other one!

Liking the new workshop guys 😀👍

Won’t stop much in accident. To my mind every suv should have a metal gate load separator if you carry stuff and don’t want a missile to the head in a collision. The LR metal gate is top notch.

It's far too expensive for what it is, but that's Landrover for you!

Hi 👋 Nice 👍 kit I also added some genuine Land Rover accessories to my Range Rover. Thanks for video. 🙏🙏👌👍

When I saw this video pop up I almost laughed wondering how you'd get on with the top fixings. 🤣 Yes, they are weird ! You have to rotate the pawl thing so that it locates in the larger part of the hole. In your video the RHS one has done that for you. Somehow. 😂 I faffed around with it for a while, then watched shedlock2000's video where he just clips it into place - bosh. 🤔 Agree it's potentially not as good as the metal partition but it's quicker to dismount if you need all the loadspace.

Nice video!

I was in half a mind to add one of these when I spec’d my 110 (if you get it as an interior option it’s £105 instead of £198 as an accessory!)But having watched this I’m glad I didn’t waste my money, just doesn’t fit well enough.

Hi, can this be adjusted to fit behind the front seats for when you want the middle row seats down and the vehicle loaded such as when camping? Thanks.

Expensive piece of kit, but as George says well made, quality, have to really think about spending £180 though

Hmm….that is very expensive for something that is not really up to the job…..I can’t help on the click thing..do you locate that pawl inside the round part of the opening and behind the trim ?…see if anybody works it out! Good weather for camping…what luck you are home!! Richard😱😱😀😀😀😀

I’m currently pulling my hair out trying to fit the full height load space partition in my 110. Looks simple enough, but I can’t get it to fit and stay locked in at the top! Maybe you guys need to fit one of these 😜

Will the top clips fit better if you turn it around ie left in the right

And now something completely different: Is there a comprehensive online new defender parts catalog available somewhere? I didn´t find any. I mean all parts of the car, especially interested in the middle console parts. Thanks!

Volvo V70s have all that built into the back of the seat which can be taken down when not in use .

Try swapping the top corners over, left to the right and vicci verci

Reckon Powerfuluk could make something similar and retail it for £70 Landrover taking the mick as usual.

Just a thought chaps, the space at the side of the partition may be deliberate to allow room for the Air Bag in the panel below! Cheers Non Stick Nick

I had it on my D5 and Velar, the little plastic lugs should fit into the holes I think, makes a decent dog guard but wouldn’t trust it with gas bottles. Off topic though I’ll ask anyway, can the centre console/armrest be removed? I deleted it from order but LR fitted anyway.

Why are the straps so long ?

Did you work out anything regarding the clip once the trim piece turned up?

@powerfulukltd what have I spied on the rear? external power and a waterproof box above the rear lights on left hand side…?

Does anyone make an insert which could be put in the back of a defender 90,in order to make the boot level?? If not it’s sounds like a good idea to me?

Hi can you reverse the roof fittings ie lput the left one in the right side and vice versa .

I thought you were going to fall out the door.

Might be nice quality for metal clamps and wire but its still just a sheet. Way overpriced. Probably cost £5 to make if that.

I want a load retention system to be strong enough to stop stuff like a gas cylinder hitting me on the head in the event of an accident. But this system is only good enough to stop stuff rolling onto the back seat under mild breaking. The pins in the cleats will shear first and it looks like it will pull out of the roof no problem. It's a pathetic piece of rubbish. Quite like the car though.

What a monumental rip off. Does it come with a free stamp that says mug? I love Landrover vehicles but they are smoking something when it comes to the price of accessories.

Too dear!

Flimsy net vs 20kg gas cylinder. Hmmm 🤔

Hopeless, at least you didn't need a hacksaw and grinder this time