Land Rover wheel bearings - how to change them yourself

Рет қаралды 18,427

Күн бұрын

How I change wheel bearings on my Land Rover discovery 1 300tdi.
Support me on patreon:
www.patreon.com/thenorthernexplorer
Enquiries -
danbritten56@gmail.com
0:00 Introduction
0:38 CHECKING THE BEARINGS
2:19 REMOVING THE HUB
8:07 REMOVE THE BEARINGS
15:23 FIT NEW BEARINGS
19:25 PACKING THE BEARINGS
24:43 REFIT THE HUB
*please note I am not a mechanic, my videos are only how I have done work on my vehicle. if you do not feel comfortable doing this yourself contact a qualified mechanic.
#howto #landrover #wheelbearing

Пікірлер: 41

@cameronmagbee6875 2 жыл бұрын

Thank you for the contribution by filming this. Good to find clear information.

@TheNorthernExplorer 2 жыл бұрын

Thank you Cameron, hope it helped 👍

@hutchhaines2559 Жыл бұрын

Thank you for the video! Very helpful - you explain things calmly and it’s easy to see what you’re doing. Cheers

@TheNorthernExplorer Жыл бұрын

Ahh thank you very much! Glad it helped

@micah_mudflaps 2 жыл бұрын

Dude, finally a good quality video of how to do this!

@TheNorthernExplorer 2 жыл бұрын

Thank you! 👍

@the_black_knight_sv Жыл бұрын

Great stuff mate! Thanks for the video!

@bossmantrading Жыл бұрын

Thank you for this video - mine failed Mot this week on o/s front bearing. I’d adjusted it but it was too far gone! 3 hrs out today with your video to hand for reference and it’s job done. That and a fog light bulb and it’s re-test time tomorrow. 👍🤞

@TheNorthernExplorer Жыл бұрын

Sorry to hear it failed but glad you got it sorted! And glad the video helped. Good luck tomorrow

@frankpineda1832 5 ай бұрын

Thanks for the video, very helpful 👏👏👏👏👏👏

@TheNorthernExplorer 5 ай бұрын

Thank you

@nealeford1964 2 жыл бұрын

Very, very good. You make an excellent teacher!

@TheNorthernExplorer 2 жыл бұрын

Thank you neale really appreciate it 👍

@spooky4x4overland37 2 жыл бұрын

Bloody love them headlights!

@TheNorthernExplorer 2 жыл бұрын

Haha cheers mate! Working on the video on them should be out soon

@israbriz1772 2 жыл бұрын

Good info. Love the accent! Greetings from Montana

@TheNorthernExplorer 2 жыл бұрын

Thank you

@kstewart3657 Жыл бұрын

Excellent video. 👏👍

@TheNorthernExplorer Жыл бұрын

Thank you

@landrover965 Жыл бұрын

big like, you deserved it, thank you very much, GREAT JOB 🌷

@TheNorthernExplorer Жыл бұрын

Ahh thank you! Glad you enjoyed it I really appreciate the comment

@gritstonegreg 2 жыл бұрын

Great video, thank you for posting!

@TheNorthernExplorer 2 жыл бұрын

Thank you

@DeezNuts-jh1hh Жыл бұрын

Great vid mate!

@TheNorthernExplorer Жыл бұрын

Thank you David

@RockmanDash 3 ай бұрын

Going to be doing this on my NAS spec Defender 90 this afternoon. Thank you for the video!

@TheNorthernExplorer 3 ай бұрын

Good luck! Hope everyone goes smoothly

@RockmanDash 3 ай бұрын

@@TheNorthernExplorer Thank you, only waiting for UPS to delivery the 52mm socket

@TheNorthernExplorer 3 ай бұрын

@@RockmanDash always good to build up the tools for the jobs 👍

@RockmanDash 3 ай бұрын

@@TheNorthernExplorerDone! Cutting a slot in the old bearing race was genius.

@TheNorthernExplorer 3 ай бұрын

@@RockmanDash haha glad it helped mate 👍

@edwardnsubuga613 2 жыл бұрын

Thanks for taking time to shoot such a good and informative video.Just wondering though, didn't see you grease the front bearing.waiting for the video of how to do the front headlights. Thanks mate.

@TheNorthernExplorer 2 жыл бұрын

Thanks Edward, the front bearing should be greased the same as the rear, I just didn’t show it as it would make the video even longer. The headlight video will be up soon I just need to do the finishing touches. Thank you for following 👍

@AlbicannaES Жыл бұрын

Nice one mate, you get another sub. 100nm on second but took me a bit by surprise. I thought it is 61nm also but if looks like tip from someone who works on those for a bit. Best

@TheNorthernExplorer Жыл бұрын

Thank you very much! And welcome to the channel

@user-sn4zp2ny5e Жыл бұрын

play in the wheel when you shake it from 6 and 12 o clock can also indicate that the bearings in the swivel ball are shot. if the play is still there when you press on the brakes then you'll know for sure that swivel bearing is gone

@TheNorthernExplorer Жыл бұрын

Luckily for me I did the swivels a couple of years ago with new balls and bearings etc