Land Speed Mini Bike Top Speed Testing

Land Speed Mini Bike Top Speed Testing | 40HP, 130lb Mega Moto!

Рет қаралды 159,822

9 ай бұрын

Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
Mega Moto 80/105 front suspension frame: bit.ly/3mRbqqR
10" machined aluminum front wheel: bit.ly/3rlUgrh
10" machined aluminum rear wheel: bit.ly/3rtbkvn
Flat track tire for 10" mini bike wheel: bit.ly/3zz8upx
Call GPS for a custom Tillotson 236cc build
Pillow top grips: bit.ly/3PTr58c
Front brake kit for 10" wheel: call for availability
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 559

@NubsWithGuns 9 ай бұрын

That camera view from behing the headlight hole was killer John. Your camera work has gotten awesome over the years.

@MaNNeRz91 9 ай бұрын

360 cameras rule

@Philc231 9 ай бұрын

John is the brains behind this production

@contraband1543 9 ай бұрын

@@Philc231The computer side of it probably. Not the building side of things 😂

@MaNNeRz91 9 ай бұрын

@@contraband1543 he's a pretty solid rider as well though. When Ike was worried to ride one of the bikes a little while ago John was like yeehawwwwee

@CarsandCameras 9 ай бұрын

Thank you! Worked out perfect this time

@drgti16v 9 ай бұрын

10,200 MPH!!! Hold on there boys.

@TetraHydroCannabinolTHC 9 ай бұрын

Yeeeeee Heeeee

@codyconnor8353 9 ай бұрын

Rpm*

@codyconnor8353 9 ай бұрын

Ain't that fast there Timmy

@ChrisRollins 9 ай бұрын

I just finished a landspeed project, and learned that changing sprockets by just one or two teeth can make or break your speed wildly

@davej3487 9 ай бұрын

1 tooth up front is about 3 teeth in the rear. I still like running as big a sprocket up front for less drag on the chain bending the corner

@randbradbury 9 ай бұрын

That fairing pairs perfectly with that 360 camera! Great job.

@ghomerhust 9 ай бұрын

yeah it's exactly perfect for that kind of filming. fantastic for showing the speed from a great perspective

@turdferguson5300 9 ай бұрын

You guys are still in small group of people to go over 90 on a minibike. I consider that test day a success.

@dmwi1549 9 ай бұрын

At 1.46 minutes in: That engine’s power peak is 10,200 miles per hour? Great Scott! 🤣

@dakotaherron52 9 ай бұрын

I love how much this channel has grown. I remember watching when Ike flipped the lawnmower y’all made or the Ducati go cart trying to go fast all the way back then. Seeing where yall are now makes me super happy building new things to try new speeds!

@waynerowlinson6177 9 ай бұрын

I thoroughly enjoyed this video. Thanks. I love the small displacement engines and the fact that in comparison to some of your videos, this was relatively safe, even with the speed.

@grantnames8152 9 ай бұрын

I’m loving the land speed and the drag racing cars. I’ve never seen anyone build a trials mini bike I think that would be super cool and fun. Slow a lot of torque , no seat etc

@gingerelvis 9 ай бұрын

Looking good guys! Focus on aerodynamics, tyres and gearing and you'll be golden. I think changing to rear sets would be a big help, being curled up with forward facing controls is creating a bit of a parachute effect.

@drutang 9 ай бұрын

shout out to Washington Warren Airfield!!! thats a really awesomely kind gesture to offer the airstrip!! 🇺🇸🇺🇸🇺🇸💯😎😎

@TrippyTrev45 9 ай бұрын

I was yelling at my phone when John was riding feed it John just feed it 😂😂 can definitely see that Ike has no fear he was flat stick the whole time

@WyFoster 9 ай бұрын

Because the gear was so short. It would have blown up if he just valve floated it the whole way down the runway,

@steveskouson9620 9 ай бұрын

Aerodynamic drag increases with the square of the velocity. Which is why that top end gearing is so critical. steve

@jonathancrissinger2301 9 ай бұрын

Just be careful guys. That's cookin for a minibike it's really great to watch and I would love to keep watching. I don't want you guys to be hurt. Thanks for sharing and I'll see you soon in the next one.

@ejforet5695 9 ай бұрын

Wow it's crazy to see how far u guys have come over the year

@CarsandCameras 9 ай бұрын

Hard work and a supportive community!

@JohnnieBravo1 9 ай бұрын

We are ALL learning, watching you guys.

@funnyfudgeman16 9 ай бұрын

The 360 camera location was so awesome

@Henrik.Yngvesson 9 ай бұрын

Grind off the tire nobbs and make them slicks. Saves moving weight and rolling resistance. Total bike weight doesn't do much for top speed, only acceleration so for land speed it doesn't really matter, adding weight with a big fairing could therefore be a win as wind resistance has way more effect.

@Robert-ni6ut 9 ай бұрын

It's awesome that Washington Airport let's you guys use the strip never seen a Minnie 🚲 bike go so fast before 😁👍

@Bosco-gets-it-right 9 ай бұрын

At 1:50 John said "it's full speed @ 10,200 MILES PER HOUR....I hope you meant 10,2000 RPM.......10,000 MPH is damn fast....

@Ty-bz7zx 9 ай бұрын

Lol .. great correction. "I hope you meant 10,2000 RPM". Maybe stick to easy comments.

@g-force2745 9 ай бұрын

I was just about to comment the same thing. That's so funny 😂 must have been a late night for them...

@Ty-bz7zx 9 ай бұрын

@@g-force2745 Some people =))

@jefferysmith8824 9 ай бұрын

Great job boys! I have a blast watching the 3 of you and your crew!

@GoPowerSports 9 ай бұрын

That was a joy to watch. Need to get the gopro app and add a sticker to show your mph.

@WyFoster 9 ай бұрын

Everyone who said the other bike was too heavy, this bike is slower with twice the horsepower and half the weight. Goes to prove me correct that drag is everything at these speeds.

@Paulman50 9 ай бұрын

Yea, above 60 the wind drag, front and rear, gets multiplied more and more as the speed increases. Just sticking your elbows out can cost 5mph. Years ago I could get 70 out of my Yamaha RD50, mostly by eliminating drag. They also need a 6 stone test pilot.

@natereinhold6180 9 ай бұрын

In my '88 MR2, I could be going 140mph and pop up the headlights or vent the sunroof, and I couldn't push past 125

@CaneAtvse 9 ай бұрын

This video feels like the old original content when yall first started with just you two knuckleheads... cant believe yall have come so far... and have inspired me to even start filming and learning to make content... love watching you fellas and the itll be fine attitude of squint if its mint

@joshuathomason4708 9 ай бұрын

When homie said where this thing is warming up most things are topping out I could just see the pride in his face that was awesome 💯

@Mad-Duk_Machine_Werkes 9 ай бұрын

The "Heavy Spot" on the front wheel is the VALVE STEM, you have the yellow Circle printed on the tire which is the LIGHTEST part of the tire which is supposed to be mounted on the rim by the valve stem, you have it 180 degrees away which is exactly the opposite of what it needs- You should have let the air out and popped the tire off the bead of the rim and clocked it, and you MAY have needed no weight

@StonyCreekBushCampCaravanPark 9 ай бұрын

G'Day from Australia. I finally caught up with your years of videos. Just my perception but its the fun racing that appeals the most. You need to do more vids on people having fun chasing each other on the racetracks. Its the best vids you have.

@HorstDBorst 9 ай бұрын

So for the balancing part...there is a yellow dot on the side wall where thr valve stem should be so the tire would be nearly perfect balance

@michaelrobbins9983 9 ай бұрын

I came here looking for this comment. Thank you in glad I'm not the only one that seen that. Yellow mark is the natural balance point.

@georgesmith2431 9 ай бұрын

yeah, and the yellow dot was oppisite the valve, which shows why it should be by the valve.

@JohnHill-jm7tm 9 ай бұрын

Great video guys 👍. Y'all are so close to the 💯. Ike really enjoyed talking to you at the Drone Expo Saturday❤. A lot were interested in the carts. This Old Man from Washington NC always enjoying your videos 🛵🧔💝💝💝

@larrydavidson3402 9 ай бұрын

You'll get it there, no doubt in my mind.

@SketchyBuiltEm2 9 ай бұрын

that 360 cam work was sick

@davidcopeland1267 9 ай бұрын

Try and incorporate leg/knee baffles to help get the air around your legs on the next build, as in you can tuck your legs into the fairing

@williamstamper442 9 ай бұрын

Im only a minute and well 1:26 in is where im at and i must say boys, this is the best looking ride y'all have built yet! Ive been with the channel since i believe later part of 2017 and i enjoy your stuff so much. Y'all keep me going on my own stuff just because of your clean enthusiasm...if that makes sense!

@rich8520 9 ай бұрын

It's definitely a worthwhile project. Good for California, and I am from Texas, but I love you guys, and you outta crush them real good. Keep this project going and blow the doors off those other guys!

@davidallison669 9 ай бұрын

Really like the new lettering for your thumbnails, looks really slick. Content is phenomenal as usual, y'all are doing great.

@awhoot1 9 ай бұрын

Man, that little bike is freaking awesome! I love those tire, balancing things that you guys have there! I got to get that for my auto shop lol

@awpgaming7505 9 ай бұрын

would love to see ike use that track suit and get a cheap r3 or ninja 400 and rock out some laps on a track for something different. Would be neat to see you guys all do it honestly and watch the progress and the adventure!

@larrycarlston4044 9 ай бұрын

I'd like to see them go for a land speed record on a Ninja 400. And have Ike wear his muffin top leathers. That would hit a million views in a few days.

@michaelquiltysherwood9615 9 ай бұрын

id actually be quite interested to see an episode where you had Russell show us about some of his projects, i think that would be quite interesting

@robertkehlerjr.8258 9 ай бұрын

I would like to suggest putting foot pegs further back on the megamoto near the back wheel so your kinda laying down and able to have better aerodynamics with the body stretched out.

@M1A4R8K8 9 ай бұрын

The yellow dot on the side of the tire should be placed where the valve stem is for better balance

@joebufford2972 9 ай бұрын

The writer suit can be aerodynamically altered to make it as slip stream as possible with helmet and back fins to close up the air at the back. Good job guys! My mini bike back in 1969 could never have done that😂

@PatrickTolmie-fe1ty 9 ай бұрын

Good video guys keep up the good work and break the record

@warriorM14 9 ай бұрын

Love you guys and your content it feels amazing to be able to grow up with you guys on KZfaq

@GooseGosselin 9 ай бұрын

Sweet camera work!

@jonnyretro2235 9 ай бұрын

I think the angle the carb is sitting at is losing you guys hp at high speed. The wind is pulling air out of the carb as it is rushing by.

@chuckfry1227 9 ай бұрын

When I was a kid I had velocity stacks on a cb750, at wot I could spread my knees away from the motor and gain big power compared to squeezing the bike with my knees. The latter caused the air flow to cause a vacuum at the stacks.

@jeffman3 9 ай бұрын

@chuckfry1227 Same deal with my GS450, if I spread my legs a touch at 85+ it makes a noticeable difference.

@dietznutz1 9 ай бұрын

How the fuck did you even think about that

@dietznutz1 9 ай бұрын

Ram Air intake ?

@optimisticpessimist484 9 ай бұрын

@@chuckfry1227 I also owned a Nighthawk (CB700 instead) and noticed strange air effects when moving my legs in or out at speed. There was something weird about the intake flow on those bikes.

@shaundonahue4621 9 ай бұрын

Its good news that the frame checks out and rides smooth. I guess its just a matter of finding the sweet spot on gear ratio. I thought sure we'd hit 100mph on this run. Thanks for bringing us along. Watching the trials and errors is good content. Heck, when something goes wrong we're just as bummed out as you are.....but when it goes right.....we're celebrating right along with ya. True story! Great job guys.

@chuckhixson2725 9 ай бұрын

I love the look of the new product. Reminds me of a Baby Bull.

@kylew27 9 ай бұрын

Can’t believe I was like 12 watching youse back in the day still watching now. First video I saw is 10 reasons to buy a cheap kart

@kode4420 9 ай бұрын

It's crazy to see your guy's channel this big now. I remember years ago seeing you guys in a shed getting a thousand followers. Keep up the great work. 👍

@williamcummings6562 9 ай бұрын

This project is very interesting. Keep making it better guys!

@1979augistine 9 ай бұрын

Definitely needing some aerodynamic fairing on the front end to fight the wind resistance . Is there any chance for a more skinny tire . Very impressive guys .

@thefunniestfarm4731 9 ай бұрын

A half fairing would put them into another class.

@kissimmeediygarage7089 9 ай бұрын

Hi guys. You have great content and I never miss your videos. Just wanted to let you know that the yellow dot on the tire it’s supposed to match the filler plug for better balance. Hope that helps.

@ruarifoley1554 9 ай бұрын

That yellow circle on the sidewall is supposed to correspond with the valve stem enabling easier balancing

@danrapp2497 9 ай бұрын

i like how the front tire turns when reving it on the lift

@lucassarchet6712 9 ай бұрын

Yeah buddy, nice work fellas!!

@playanddisplay3636 9 ай бұрын

TVR updates would be awesome! Great video.

@r070404a 9 ай бұрын

When you guys mount your tire's up try to put them on so that the paint dots on the side of the tire are next to the valve stem. It should help with balancing the wheels.

@Yuhstepgramp 9 ай бұрын

My dad met y’all today at busco talk are really chill people keep up the content

@gankylyfe9692 9 ай бұрын

Awesome guys! Y'all be safe out there and don't get into too much trouble with this thing 😂

@floivanus 9 ай бұрын

Ike is the ONLY person alive to wreck a lawn mower and you trust him to drive this machine 😂

@RobHoffmann20 9 ай бұрын

Great test run on the bike! Gotta say that Chevette you use as a backdrop would be mighty sweet rolling down the road!

@theoneandonly2421 9 ай бұрын

I have faith in yall, yall will get there. Its gonna be tough, but its not far out of reach. I built a bike and engine for someone awhile back and let me tell you it was tough hitting 60mph. The engine was a stage 3 212, all off the shelf parts which claimed 22+ hp. Idk if thats our end result or not. It had a big aftermarket Mikuni on it built and tuned by me. The frame was a junk Coleman frame that we built as best as possible, with whats available in the aftermarket world. We had 4 or 5 diffrent gear sets. We ran it on Shell V-Power 93 octane pump gas. I can tell you, the built engine was rowdy, but with a 200lbs man on it i think the fastest we ever went was 57mph. I couldnt imagine trying to hit 100+ even with the big boy 236cc. Like you said power and weight isnt everything, you gotta be able to slice through the air resistance with the least amout of drag as possible. I know yall will get there, we will be watching!!

@sandmanbub 9 ай бұрын

I'm wearing a shirt that looks a lot like the one Ike was wearing while driving. Cool coincidence. Farout man! lol.

@btv1676 9 ай бұрын

Agreed. You're getting very professional on the concept, planning, builds and tests. Id love to see real time telemetry on the screen I love the mental battles between optimism and practicality before each run. Lol. It's just a test. Yeah s test of 110 mph

@Philc231 9 ай бұрын

Too much tire resistance. Slicks man !

@kcav5374 9 ай бұрын

Well, you're worried about the rear tire growing too much, so go to a a slightly shorter rear tire and see how that helps in gearing.

@christaunton6500 9 ай бұрын

I'm surprised you didn't block off the headlight opening. For gearing, remember to take tire growth into your calculations.

@TOMMY-WANT-WINGY 9 ай бұрын

Great video guys. Thank you

@staceygandy2009 9 ай бұрын

I think better tires would help alot. And if the tire is expanding at speed it could be rubbing just enough to drag and effect the top speed. But its really cool! You guys will probably get to 120. Good deal!

@GodschildinNC 9 ай бұрын

Nice work guys! The shot through the headlight opening was cool. If you can get your feet all the way to the engine with the knees in. A wedge diverted on the front of the frame and out t cover the legs, and a front fender will help.

@shanewright6958 9 ай бұрын

Great job guys 👍👍

@sucha603boy 9 ай бұрын

This channel is always a joy to watch, been subscribed for years. Keep up the good work and it’s great to see you guys enjoying what you do

@460Tang 9 ай бұрын

I did some calculations for you. Assuming overall tire growth, 10,000 rpm and a speed of 111 mph. I know you have a 11 and 13 tooth gear. The gear ratio I came up with is either 11/65 or 13/77 Without taking consideration of tire growth the ratios came out to 11/56 or 13/67. Tire growth was estimated at 1.5 in increase in radius. Personally, i feel a 13/72 gear combination would guarantee a triple digit speed, probably about 105mph.

@TimothyKepner 9 ай бұрын

Get rid of the street tire and go with a slick and has anyone ever looked at the spark plug ? the plug can make a big difference in top end. What weight oil are they running in the engine? That is something else to look at as well. Nice job on figuring out the tire growth.

@peterlobb6456 9 ай бұрын

Great camera shots in the nose fairing!

@lorenmars5244 9 ай бұрын

NOSE CONE CAM!!!!! Can't wait to see that shot at 100 MPH plus.

@gankylyfe9692 9 ай бұрын

Definitely need to figure out one sprocket at a time boys but this was real cool

@PewPewGuy85 9 ай бұрын

Looking good. It will hit the goal before you know it. Y’all are a good group to represent NC!!! I’m NC born and raised. Greensboro area

@JCMODS6969 9 ай бұрын

yeah you had it geared for 120 with that tire size but if it grows 2" thats like 132mph

@keithkamps77 9 ай бұрын

Cool video, when you boys mounted the tire to the wheel you should have put the yellow dot where the valve stem is.

@shotsrodder 9 ай бұрын

I’m impressed with Ike’s cahons 😂😂 no fear

@virtualizeeverything 9 ай бұрын

I love the racing stuff

@bobmanzi7712 9 ай бұрын

great stuff guys thanks

@Skizzo321 9 ай бұрын

TVR Tuscan! Nice!

@heathcatholic7917 9 ай бұрын

Good job you will get it

@tehcompbuilder 9 ай бұрын

With the amount of tire growth I'm not surprised the gear ratio calculations were off by a bit. That tire grows quite a lot.

@jasonbirch1182 9 ай бұрын

Yup

@tinkerne-round4079 9 ай бұрын

Hey John a huge improvement to your production would be to put microphones on everyone. Watch an episode of Bad Chad. You can hear every word from every person in the shop.

@optimisticpessimist484 9 ай бұрын

Yep, wireless lapel mics will make a huge improvement and they are comfortable to wear.

@SuperBongface 9 ай бұрын

Russel has a TVR?!?!? OMG God!!! Heck YEAUH!!!

@bodine2537 9 ай бұрын

Hey Ike ,just wanted to ask you at least 1 more time how’d it handle 😂, I think John asked 3-4 times ,that’s a good looking bike and you can tell it’s pretty smooth with the camera views hardly even shaking at all , great work guys 🤙🏼

@willkelley7747 9 ай бұрын

Hey for future reference… the yellow dot on tire is suppose to be lined up with valve stem for balancing purposes

@peyton7563 9 ай бұрын

Keep up the good vids! 👍

@stapler314 9 ай бұрын

Love the vids!

@09FLTRMM77 9 ай бұрын

MM77 Approved 👍🏼👍🏼…………………………………………………………The camera view out the headlight hole in the faring was pretty cool.

@draggonhedd 9 ай бұрын

you guys have the space for one of those 2 speed centrifugal jackshafts in there, one of those seems like it would be perfect

@jeroldlafferty54 9 ай бұрын

Ditch the big meats run the small slicks, lot of rolling resistance pulling the heavy meats. Your lowering bike fixing tire rub at the same time. Narrow bars and hunch back leathers will help with the slipstream the back of the bike. Awesome job on the build guys.

@bradleysmith2021 9 ай бұрын

You guys should consider doing circles at the end of the runway to spool the bike up to speed. Go as fast as you can before you lose traction, then bullet down the track for a run. I bet it’d break 110 with this approach.

@darellsimons2687 9 ай бұрын

I'm so hyped 🎉

@rodzillagene8525 9 ай бұрын

Now I know how to balance a tire at home thanks ike🤘

@slamboy66 9 ай бұрын

Only 1 min in and already wondering how those 62 mile an hour rated tires are going to hold up going twice as fast?🤔🤔🤔

@goosenotmaverick1156 9 ай бұрын

Speed rating requires withstanding at least 30 minutes at that rated speed. After that tire integrity is not implied or promised. That's why tires on vehicles that go really fast need to be replaced after hitting rated speeds or higher. Check it out, how tires are rated is actually kind of interesting, if you're into stuff like that. But given you asked this question, I bet you find it interesting 😎

@slamboy66 9 ай бұрын

@@goosenotmaverick1156 THNX capt. DOT

@larrycarlston4044 9 ай бұрын

Why would these guys choose a knobby, wide, heavy, off-road tire for a high-speed run? I often wonder if they do these things for ratings or if they are unsure of racing physics?

@JustInvertedFpv 9 ай бұрын

@@larrycarlston4044It might be difficult to find the kind of tires you want in these sizes.

@contraband1543 9 ай бұрын

@@larrycarlston4044They're just spitballing. I don't see much research being talked about. It gets frustrating at times as a viewer, but when you're on a one week schedule for videos it's also hard to keep working on the same bike and keep it interesting and keep the views and hype up. If they made it perfect no one would watch and I understand that because perfect is tedious and tedious isnt fun to watch.

@shrugger1 9 ай бұрын

You didn't break the ton. But a heck of a lot of fun.

@xpndblhero5170 9 ай бұрын

I've been wanting to do something like this and to make a mini street bike w/ full body kit so it looks exactly like a small street bike.... Now I'm leaning more towards an electric bike w/ a 96v 20kw motor and a big 300v controller. I want a bike so scary that nobody wants to ride it.... 😂😂