A review of the Lang Tools 279 Brake Caliper Press.
Пікірлер: 62
@ihuntdolphins7146 Жыл бұрын
Thank you, my guy! I don't know how many flipping videos I went through trying to get mine to work. Turns out the person that gave it to me broke it. I appreciate the rundown on how the tool actually works
@starastronomer Жыл бұрын
You're welcome!!!
@Ratkill90004 жыл бұрын
Got the same one for Christmas this year. Going to be using it a lot at work. Used Cornwell, Snap-On and they are pretty much the exact same. Wouldn't be surprised if they all were just made at the same place with different rubber handles for the company logo.
@starastronomer4 жыл бұрын
Aaron J...looks like Santa was very good to you this Christmas :) You can never have enough tools. I agree, they just change the handle cover.
@steamerjohn92123 жыл бұрын
I'm just ordering this tool now and this vid helped me make up my mind. Thanks! I'm guessing the o-ring is to seal off the threads keeping grease in and dirt out when closed up for storage.
@starastronomer3 жыл бұрын
Steamer John Thank you!
@Bmw2473 Жыл бұрын
I got something similar but less complex at the advanced auto it’s a magentic nut and bolt in the middle with the use of a 3/4 wrench you just adjust the nut and it backs off the bolt causing it to spread open. Was like $12 and works like a charm
@TheDNM772 ай бұрын
What is the tool called ?
@troy34567893 жыл бұрын
Looks easier than messing with a big c clamp. I've been doing them all my life with a c clamp
@starastronomer3 жыл бұрын
Robert Paulson Indeed, much better!
@peterscotney12 жыл бұрын
in the UK we have G clamps...never heard them called C clamps before ?
@Nemesisjho2 жыл бұрын
@@peterscotney1 Yea, but you also call them "chips" instead of "fries" so... ;)
@jamoss20072 жыл бұрын
his name is... yup
@romeosmith41023 ай бұрын
@@jamoss2007No more Fight Club for you
@Toolaholic74 жыл бұрын
This one is rebranded made for the tool truck brands including Napa.Make it for Snap On under the Blue Point brand name.Make it for Mac tools also.I have found one brake pad has to be in place in some applications,one was a 2011 Ford F150 4x4
@starastronomer4 жыл бұрын
Thank you for that information Walter.
@Toolaholic74 жыл бұрын
They look the same,only differences are the color of the handle and part number.
@jeffreyverry84672 ай бұрын
If you use an old pad you can extend the maximum Spreading distance for larger vehicles.
@starastronomer2 ай бұрын
👌
@subietech1.65 жыл бұрын
I have the matco one don't remember what I paid for it. Mine has those orings on both sides. This is must have tool for me 👍
@starastronomer5 жыл бұрын
It is a nice tool.
@FD-dh2fu2 жыл бұрын
Great info. Thank you
@starastronomer2 жыл бұрын
You're welcome F D.
@byrdguu4 жыл бұрын
That makes it waaaaaay easier! Thanks
@reidsmith55124 жыл бұрын
Do you prefer the Lang or Lisle type better?
@starastronomer4 жыл бұрын
reid smith...if I was only going to get one it would be the Lang.
@julianarodriguez36352 жыл бұрын
Lisle
@debendragurung30334 жыл бұрын
i wonder how much force it can take
@starastronomer4 жыл бұрын
The way it is built I assume it would just stop pushing the piston in if it were seized that bad.
@debendragurung30334 жыл бұрын
@@starastronomer I actually intended to use it for something else
@uenragedbro2 жыл бұрын
@@debendragurung3033 what are you trying to do
@alquitorianojr50555 жыл бұрын
I only paid $45.10 for mine on amazon
@keviiiboo74603 жыл бұрын
I couldn’t get it to fit inside the caliper. Anybody else have this problem?
@starastronomer3 жыл бұрын
Perhaps your calipers are too small for this tool Kevin.
@keviiiboo74603 жыл бұрын
@@starastronomer yeah, a big disappointment. I tried already with the other tool that uses the old brake pad and you turn the knob (ship steering wheel type), but it’s just too hard. A friend that’s helping went to the store to get a C-clamp and we’re gonna try with that.
@starastronomer3 жыл бұрын
@@keviiiboo7460 A C-clamp always works. Good luck!
@keviiiboo74603 жыл бұрын
@@starastronomer No luck. I’m planning on replacing the caliper now. It’ll be alright.
@starastronomer3 жыл бұрын
Thanks for the update.
@soundvillage9637 Жыл бұрын
Hello everybody just got this tool on Amazon no cap works great 👍
@starastronomer Жыл бұрын
Thanks 👍
@cesarcoronaii7456 Жыл бұрын
Sound village- We need a cap?
@sirturdsalot83902 жыл бұрын
The O ring is there so you dont tighten the wing to much and jam it. Or lock it up. Same for the nylon ring.
@julianarodriguez3635 Жыл бұрын
Will it work on Asian cars and trucks
@starastronomer Жыл бұрын
Not sure.
@williamwaters45064 жыл бұрын
I just bought the same tool on eBay for $14, shipping included. Mine has no name on it.
@troy34567893 жыл бұрын
Made of pure Chinesium?
@anthonychase49452 жыл бұрын
@@troy3456789 If it works who cares.
@cesarcoronaii7456 Жыл бұрын
They need to add Chinesium to the periodic table of elements- works great if not better then steel
@dedrickwashington5126 Жыл бұрын
All that matter is if it work geezz!!
@keithameerali94744 жыл бұрын
Good except your hand disturbs the camera view. it's easy to do however.
@noobinho8882 Жыл бұрын
I wish i could made one like this, that anticlockwise tread is not possible for me to make 😢 😕 😔 😞 otherwise i made it
@naseerahmadnisar7399 ай бұрын
thanks 👍
@starastronomer9 ай бұрын
You're welcome @naseerahmadnisar739
@b.anthonywilliams1604 Жыл бұрын
Thanks
@starastronomer Жыл бұрын
You're very welcome!
@yutosi21093 жыл бұрын
It doest always fit on som calipers but boy it is a great tool
@ureasmith30493 жыл бұрын
I got 17 dollar Chinese version of he tool. Works great.
@monksotheasin33662 жыл бұрын
Expensive
@caddydaddyz30524 жыл бұрын
On Ebay $15.19. Amazon $72? People on KZfaq seem to promote Amazon all the time, but your getting robbed! Ebay baby!
@starastronomer4 жыл бұрын
Thanks Aaron...I am just not an Ebay buyer.
@starastronomer4 жыл бұрын
@J C Thanks J C. The ratchet design works great. There is a reason for the large price difference.