Instead of tap water which may have minerals, use distilled water. Thanks for the video.

Hi Sorin! I like your TBK-008 so I'm ready to ordered 1. Good vid!

This video Very Help me becous my new laptop was broken becouse of milk damage. I brought my laptop to service Center but I did not found. Now at 12:30 I am finding this video tutorial than now I understand the way to fix my laptop. Thank you si much for share your life Akilo.

It"s Electronics repair school. if you don"t learn here. don"t search arround

It much better with warm water. In factory we do use a machine to spray warm water on pcb, just to clean the solder paste from pcb. We usually do it when operator use wrong stencil to print solder on the pcb or wrong work order.

Nice work Sorin

fantastic advice with the water glad you passed it on :)

perfectly done job Sorin

For boards with liquid damage (sugar, coffee, wine, etc) I put it in a tub with hot water with dish liquid, wait half an hour then clean it with a small soft brush. Then I rinse it with distilled water using a spray container and put the board front of a fan for couple hours. The hot water will dissolve even substances stock between solder balls of the BGA chips and connectors. Boards looks like new.

Thanks for the video.

Thank you, it helped me fixing my controller with milk damage too after being so sad and hopeless

Looking good..Great video.

WOW! the water works wonders! I've always only used alcohol amazing!

Soren this is great dude

Great video as always, but promising beard mr Sorin, keep it growing!

SORIN, Before heating the pcb, use kitchen towel to soak up the water/milk mix, then heat the pcb. (you were diluting the milk and spreading it). I used warm water and kitchen towel, then heat on a apple laptop with fruit juice spill, works :-D

Hello. Master, the South Bridge often has problems. Please also make videos about the problems of this bridge so that we can use it. thank you

Sorin's new magic, this time I mean with distilled and not ordinary water. What else will he reveal to us, great master!

Hello, Sorin. Thank you for another really good and helpful video. I would like to know what you're using to dry. Is it a blow dryer or vacuum dryer or what?

Use of de-ionized ( also mentioned by few commenters below) water both in circuit board manufacturing, as well as the wide use in semiconductor wafer and circuits manufacturing is well known. The de-ionized water is “purer” than distilled water. It has 3 grades ( 50k Ohm, 1M Ohm, and 20M Ohm resistivity) determined by its resistivity. The highest grade ( least conductive) is used in semiconductor wafer manufacturing. For circuit boards with components on them, wash with deionized water, use high percentage ISP ( for displacing/ dislodging water beneath the ICs), and drying with gentle heat right after the cleaning. A good discussion is here: www.circuitnet.com/experts/70402.html.

Pouce bleu ! comme d'habitude ! BRAVO BOSS ;)

Looking good with the beard today

Your screwdriver sound remind me a dentist, Sorin😄

thank you sir

Looks like sir you have changed the table Love from india

Wow, today I learn new tip form You

Wow , water ! Thanks for the hint

could have given the battery and inside a quick wipe

Use distilled water its safer and non conductive !! ;)

I think it should also be emphasised though that for beginners it goes without saying you must make sure you remove all power sources including the CMOS battery if you have one to do this sort of thing, and also make sure not a drop of water is present after you dry it out! Otherwise it's insta death...

Hi you must make a video about the multimeter struggling to understand it,and also about where and how to inhect power.thank you in advance

haha this is the luckies Tech ever 😂👍 Milk spill damaged, and using water for cleaning, what a magician hands 😅

You look great with beard, Sorin. 😉👍

Sorin, where did you get that lovely electric screwdriver from - what brand? It even makes a nice noise too.

I think nowan well drink from this bottle🤣🤣That's good meaning Sorin Thanks for the laugh and Wishing you all the best from Serbia!!!

I also clean the sticky liquids damage with demineralized water. But then, after drying it with kitchen paper towels and hot air for the first time, I wash the same place with alcohol. The point is for the water to remain under the circuits to mix with the alcohol and thus evaporate faster and completely during the second drying.

Nice one

You can also use windex/glass cleaner and it will dissolve sugar.

... if you leave the laptop for a while, it will be not a milk job, but a cheesy job! :P

why are there no subtitles?

Distilled water way to go ! Maybe battery could have been cleaned also ? Thanks sorin...

What a weird spot for the power button, I haven't seen that one.

The power of the healing water.

Milk also contains sugar, called lactose.

nice one sir (youtube suck a lot off ADS ) ;😢😢😢😢😢

Water/dishwasher/ultrasonic cleaner. Np Will do a great job.

a really lucky customer

I always clean the complete board with hot water and some detergent in the sink, with the soft brush, after that I rinse it with clean hot water and dry it with fan.... the best way

where is the power button ???? hahaha so funny!!

I like the beard. Nice touch. 😀

Did your Coustmer watch these videos, how you easily repair the laptops

Is youtube selective with its processing resources? 30mins of 1440p uploaded & processed in a few hours? I had to wait over night for a 4min 4k 60fps vid to process the other day (other channel, low subs)

Hello Sorin, did you consider making Linux live USB stick, so you can test the laptop functionality including the keyboard without exposing any personal details of the owner?

Tell them Computers don't need feeding with milk 🤣🤣👍

Bruh he can fix it BUT WHEN A PROFESSIONAL TRIED THEY CANT AND MY LAPTOP NEED TO GO TO THE TRASH 😭😭

Mr. Sorin, i have a acer no power laptop, i try to repair it then the power led and charging led ligths on but cpu fan is not spinning

i love this guy

Whatever laptop drink my teacher sorin sir will out it😄

Oh come on Sorin only milk...? we want butter and eggs inside !!!! :D :D xD

The end of the heatsink is held by the screw on the bottom cover

only downside of using water is video is short ✌️

Try distilled water, it does not contain mineral salts so that they will not remain after drying, and its conductivity is weak

In this condition the fast way is sink and tap current water , or a pot of water 😁

you are still the top man.

"Where is the power button?!" This reminds me, when my colleague ask me to turn on his Imac so he could login from remote.

Sorin, ex Clujean(now in LA) I have an Asus Q502LA, that can't see the HDD in Bios. Picked up the motherboard from Ebay. It worked initially, but after a few restarts, HDD was gone. What could be the problem? Nobody can help me with this issue.

hi i have a white 2006 macbook with a backlight issue can you post a tutorial fix???

Why not use a ultrasonic bath cleaner with distilled water. Then use another chemical that removes the water iff the board. I can not remember the name of the chemical. Then put it through a air dryer.

"i fix your tires and your radio is not working" Lol, what a comparison

sir how to instal the rt890f serial programer and MiniPro to macbook pro

Hello im trying to fix my sons laptop from milk damage i am a starter please can you tell me the tool your using to dry the motherboard after cleaning with water and toothbrush

The beard brings you luck 🥸😉

Let's unmilk a milked laptop.

Everyday job like this, minus the smell. I think an air freshner should now be a required tool. 😉

Easy work

what if water or some fluid go under chipset how to we deal with that ? any suggestion ? tnx!

"This is kind of disgusting job" Absolutely! Thanks for the laugh Sorin. I don't know which is more disgusting.....laptop full of milk, or laptop full of dead roaches.

What you and many other Repair-guys always do: put alcohol or water on it, rub with the toothbrush and wait a while or heat it up. So what do you think happens with the dirt/residue? You think it magically dissappears in a black hole or something? You just dilute and spread it all over, but it's not gone! Same with flux. You have to somehow soak it up before you heat it up if you really want to get rid of it.

Sir? What kind of water that did you Clear??

A Job for the Master of Desaster

Come Besiktas Sorin...Are you sure that's milk? 😃 Look at the web browser history?

i have a lenovo yoga 3 not turn on only orange light a white lite turn on when lift the screen plz help

what about the cooking oil spilled on mobile motherboard?

cleaning with Wonka is the best of both worlds. 60% distilled water and 40% alcohol :-) .

Is that russian milk? yes...with vodka!

Power button in the 🔝 row!

next to socket power wow bline\:

👍👍👍

Do you not have a sonic bath ?

as long as you have alcohol to repel your water after your good

What...no cookies?? 😂

I hope next time won't be dog piss like northridgefix :D next time try distilled water since it doesn't conduct electricity

Instead of pure water simply mix 99% IPA with some cheap distilled water 50/50 to get a much lower % IPA thay will still evaporate slower save using a heat gun :)

Hi sir, im from malaysia n im ur fan. I have problems with old lenovo g500s laptop. Everything is working fine but its will shutdown without warning in every 30 minutes. Its to far to send my laptop to u....any suggestion how to fix this kind of issue?

Where is the power button!! (very obvious if you looekd at the right 6th column top row..) Also this laptop comes from a cow farm?

Disappointed that you didn't clean the battery and heat sink. Also, you needed to open text editor (notepad) to test all keys. Liquid damage can short out banks of keys.

❤❤❤

They call it waterboarding Sorin,

Top row, sixth from the right. Power button.

Hi sir, can you help? My redmi 7a is charging and a notification light on but no display. I have change the display but it is still the same. Can I know what is the problem?