You are always welcome

Thank you brother

BOOM!

Ye sir. And after a while of using it, I really don’t need the reminder anymore. Well… sometimes I do. LOL. Thanks for watching!!!

It has crossed my mind.

@TheFreshRinse just saying, maybe run through whatever area with a good soak, set up the sprinkler/drip line and let it do the work for you. Obviously it'd cut down a little on your supply to your buffer tank but would beat swapping back and forth all the time and also cut down on running your P.W. constantly.

@@bengibson8528 That’s a fantastic idea. Thank you!

All facts!

I seem to use it almost daily

It is a 1080 camera. The problem may be on your end. I’m using GoPro and iPhone 12 Max.

@@TheFreshRinse Hmm not sure.. every video will only let me see it at like 380p and 480p and others channels it’s perfectly fine watching them at 1080p.

@@TheFreshRinse welp just clicked on the video again and it’s giving me the 1080p option now hahaha not sure what that was, sorry about that brother!! 🙏🏽

@@Abel3270 Not in the least. All good brother!

Thank you!

Thank you sir

You are correct.

I appreciate all the advice I can get.

🤣🤣

BOOM!

I do. I personally like a floater.

Good question. I’m curious as well

Same as always. 3000, maybe a bit more. I rarely lower it.

Nice!

Thank you brother!

LOL I appreciate that!

10.5” Markate Thanks for watching!!!

Likewise my friend. Avid follower here!

@@TheFreshRinse You work like I do!! you get after it. Love it brother. You do tip top work as well.

@@TheFreshRinse I mention you in today's video, working on it as we speak.

I do not. It has crossed my mind.

Thank you by the way

Thank you sir. As a personal rule, I don’t talk numbers. No offense… there’s just lots of great channels that talk numbers.

He made approximately $800-$925 My personal rule is snitching and spilling the beans.”

@@BlakWiseCracker LOLOLOL My customer wishes!

@@TheFreshRinse 😂🤣

REMCO 5.3

Thank you. Pre-treatment seems to loose the contaminants a bit, making it easier to surface clean. Post-treatment cleans up any lines on the concrete that the surface cleaner left behind.

Thank you my friend

Thank you. They just get messy. No big deal, really

I did. About 4% roof mix.

I wasn’t sure if your pre-treating experiment included the wall. Thanks for the reply.

@@pzmqyhniq Thank you for watching Jeff

Likewise my friend!

Gosh, that was a long time ago. I truly have no idea. Probably not enough. LOL

Hey brother. I’m using the typical green spring. Some kick.

Thank you. I presoak and post-rinse all the plant life really good.

Thank you good man

When it’s rinsing, it’s not in bypass’s. It’s only in bypass when you are IFF the trigger. It goes into bypass mode, thus cooling the pump. Which is good for the pump.

Probably 3-4%

Thank you. I charge .35 cents per foot

2-3% will clean just about any organic growth in brick. It will likely still need a bit of pressure as a heavy rinse.

Markate

I call them Jug Hugs. My invention

@@TheFreshRinse it's a good idea from what I see for some of those extra Specialty Chemicals. heck it's the primary reason why I like IBC totes. I'll put a lot of signage on them but I also attached a lot of my equipment to the sides of them. Do you plan on selling in the future if not would you be willing to make a short video about them so do those of us that are capable replicated for our own use.

@@TheFreshRinse by the way thank you for the reply in the first place

@@joshlang4660 Thank you. I have no plans to sell them

@@joshlang4660 Gladly my friend

Yes sir

Thanks for watching Rick. I’m glad you enjoyed it!

I never really know how to charge for that extra stuff.

@@TheFreshRinse I like $2 a foot for up to waist height, and $4 a foot for full head height

@@alexvalls7209 That’s a very good formula

@@TheFreshRinse not sure if you've tried it yet, but turbo nozzle works wonders on retaining walls like that. just my .02

@@carwashsoap Thank you good man. Much appreciated!

Great question. I did actually change from 2503s to 2502.5s. I didn’t see any difference… so I changed them back to what is recommended.

Yes, hexfecta. Thank you!

Thank you Rob!

Flirting with the homeowner the whole time.

I use Markate for my CRM

Fact on Joe! 8 for daily use. 10 is too much for daily house washing. Overkill.

Great job and awesome video broski!

@@KentuckyWashPros Thank you my friend

@@TheFreshRinse thanks for the reply Mike. You da man!!

@@soapman22 Absolutely brother!

You’re guess is as good as mine

I’d rather be a one man army than a one arm man. LOL

Thank you sir

Yes sir. Text me. 513.235.8474

Thank you brother

Determine how long you think it will take, then multiply it by how much you need an hour plus expenses

That’s a great idea. Thank you!

@@TheFreshRinse once in a blue moon I actually have a great idea.

M5Twist/Davis Shooter Tip

I don’t really think so.

Thank you good man

Yes sir. I make vinyl banners to fit your need

10 GPM @ 3000 PSI

LOL Thank you buddy

I got this one from Spraywell

I think the 30 series

I generally collect immediately. But send an invoice via text if preferred

What recourse do you use for non payment? Lien or just keep putting gentle pressure?

@@rich2209 I have 4 non-pays from this year. I have sent at least one text/email with invoice. I will now send a letter via snail mail with invoice. I will then result to violence!

Hey buddy. I rinse heavily both before and after.

@@TheFreshRinse Ok Thanks

Have I offended you in some way? If so, I truly apologize. Yes, I always pre and post rinse. I also carry SH neutralizer on the truck. I really appreciate you watching. If you would rather I change the way I say things, let me know. I’ll certainly consider it.

Also, you may want to re-watch minute 4:32

Bare wires. Electrical outlets. Cameras. Turn all outside lights off. Rinse plants before and after.

@@TheFreshRinse thankyou brother

@@TheFreshRinse I see a lot of people cover external outlet and lights with tape. Is it not necessary?

@@carwashsoap It’s always best. I have blown a few. If I think it’s sketchy, I’ll tape it.

Spraywell

Thanks my man. Absolutely love your channel.

@@matthewrobinson6297 Thank you very much Matt!

Thank you. I’m in Cincinnati

@@TheFreshRinse Thank you.

Hey brother. I honestly can’t remember. Probably not enough. LOL

I hate those things. 😂

Yes. But the rig would need to be much smaller

@@TheFreshRinse I have seen smaller ones about half a car's length. Also, I have heard that Honda motors are the best.

@@vampirehunter2698 You are correct

@@TheFreshRinse Now I need to learn how to power wash with a real unit. I have a low-powered one, but it is not the same as a 4000 gpm unit.

That’s a great question Mike. I’ll have to look. Not really sure.

LOLOLOLOL

Wait! We’re NOT supposed to do that?

LOL

BOOM!

I had a leak at my house of 30k gallons and it added $75 to my bill. Water doesn’t really cost that much

I agree. Here in Utah on city water. It costs $25.50 on a 3/4 or 5/8th meter, that's the connection fee. It's more for larger service.. Tier 1 (.5 acres) 0-65k gallons a month is $1.38 per 1k gallons. It then goes to $1.46 per 1k gallon using more than 65k but less than 115k gallons. It goes up more but what are we doing at this point? Since this home has a larger yard, they would be on Tier 2, meaning they could use 0-120k gallons at $1.38 per 1k gallons. So 10 gpm machine (which he didn't use during the entire job) we will say he did for argument.. 10gpm x 60 min x 5.5 hours is 3.63k gallons. 3.63 x $1.38 = $5 5 bucks.

Cut the bill in half. 😂 idk what he charged but guessing 2kish. Even if more or less. For argument.. Even if he changed $500 or $5000. You're saying he should charge half for around $5 in water. 😮

I’m not sure what you mean.