Largest Wind Turbine Gearbox & Main Shaft Manufacturing Process. Biggest Heavy Duty Forging Machines

No video

Largest Wind Turbine Gearbox & Main Shaft Manufacturing Process. Biggest Heavy Duty Forging Machines

Рет қаралды 111,994

Күн бұрын

Hello everyone and welcome back to X-Machines channel. Continuing the series of videos on wind energy, in this video, X-Machines will explore with you the manufacturing process of 2 main parts of a wind turbine: the gearbox and the main shaft.
0:01. Introduce
0:17. The manufacturing process of wind turbine main shaft
04:51. Machining the shaft
05:51. Modern equipment to support the forging process
08:58. Manufacture of gears for gearbox
10:22. Gear Machining with Ingersoll Cutting Tools
11:28. Machining of large diameter inner gears
12:36. Heat treatment process for gears
13:23. The world’s most powerful gearbox for wind turbines
---------------------------
X-Machines Channel
Website: www.xmachines-...
Fanpage: www.facebook.c...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the KZfaq Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.

Пікірлер: 42

@GSSurry Жыл бұрын

Excellent video. And thank you for providing the actual machining sound instead of annoying background music.

@Asif-hz8ks 2 жыл бұрын

l like it is good to see such marvel of the God gifted mind activity

@egal_ridge-qx6dq Ай бұрын

mech engnr without practicle knowledge is like "knife with no blade"

@titter3648 2 жыл бұрын

So you got 2 different sound clips and are just looping them over and over again...

@a-fl-man640 2 жыл бұрын

forging process seems like a good candidate for automation unless it lacks the volume, the parts change dimension frequently, or whatever.

@oneshotme 2 жыл бұрын

Enjoyed your video and so I gave it a Thumbs Up

@davem3789 Жыл бұрын

Direct drive (no gearbox) is the only way to go. Less mechanical parts = more reliability = more time online and less maintenance costs.

@hamstirrer6882 Жыл бұрын

Good luck trying to make any power from a generator doing 30 rpm...

@KingdaToro Жыл бұрын

@@hamstirrer6882 That's actually really easy, it just needs 240 poles for 60 Hz or 200 for 50 Hz.

@FrozenHaxor 11 ай бұрын

@@hamstirrer6882 They already manufacture them, they're the most reliable turbines in the world because you don't have the gearbox that needs replacing every 3-6 years after it wears out...

@azman4749 9 ай бұрын

@@KingdaTorohow big the generator that will be? Is it safe and economical to mounted on tower?

@KingdaToro 9 ай бұрын

@@azman4749 Yes. For that sort of generator, it will be a large ring directly behind the rotor's hub, connected directly to it.. The nacelle will be a lot wider than usual, and conical. Enercon turbines usually have this sort of nacelle.

@samsimington5563 2 жыл бұрын

3:53 I noticed the end that isn't flat has covered itself in a whitish pale oxide

@samsimington5563 2 жыл бұрын

@@sjb3460 Yep the same is true about metals that produce a black oxide. In fact I've built things myself out of wood

@samsimington5563 2 жыл бұрын

@@sjb3460 I just follow whatever written instructions are there (usually a furniture assembly manual), makes it a whole lot easier and I don't blame you for hating it TBH

@michaelwhite7470 2 жыл бұрын

I bet there not using wind energy to do the process

@tombogaerts 2 ай бұрын

What factory is this ? location

@gregcollins3404 11 ай бұрын

Forging is done not so much to shape the part as to strengthen it by arranging the internal grain structure of the steel.

@elsoncerqueiramachado9496 Жыл бұрын

OLÁ BOA NOITE O MEU SISTEMA AEOLICO É 80% , MAIS EFICIENTE QUE A AEOLICA APRESENTADA EM QUESTÃO !!!!!!

@egal_ridge-qx6dq Ай бұрын

Books are only for becoming eligble fr intrvw😅😅

@ruanjiayang Жыл бұрын

It is really shocking to actually see how these industrial giants are produced.

@aihammouteer4588 2 жыл бұрын

😘😘😘

@FrancescoSimonetti2023 Жыл бұрын

Franchini Acciai 🦾🦾💚🤍❤

@pomonabill220 9 ай бұрын

I can't STAND the fake audio!!!

@picobyte Жыл бұрын

Winddmills are expensive CO2 hogs 🤣👍

@WolfHeathen 2 жыл бұрын

All of that energy spent on something that'll never be able to produce enough to make up for it...

@ralphaverill2001 2 жыл бұрын

"All of that energy spent on something that'll never be able to produce enough to make up for it..." Please, your source of that very questionable information.

@backho12 Жыл бұрын

Yes! How can the initial cost, installation, and maintenance ever begin to provide a ROI. Just imagine the maintenance costs for those towers situated in the salt air.

@johndoe1909 Жыл бұрын

current wind turbones does it within aproximately 2 years of operation. they are hugely effocient. those figures by the way was for the old ones (about 10 years) with a size of a bout 1.5 megawatt. the newer one at 9 on shore, and 16 off shore does it way, way faste than that.

@jimwoods9551 Жыл бұрын

@@johndoe1909 isn’t it amazing that you still need to answer such idiotic questions when the energy payback is so dramatically quick?

@johndoe1909 Жыл бұрын

@@jimwoods9551 i guess there is a location component as well. different locales have different payback times.

@1gtmach 2 жыл бұрын

So how long does it take to make up for the carbon footprint to build, ship and erect these damn ugly noisy things. I know. I live 2 10ths of a mile from them. Clang, bang, swooshing noise, can sound like a jet, also shadow flicker and stop rotate and stop again to rotate; poor efficiency; as well as trucks upon trucks to erect crane to repair turbine. Boy oh boy. Such bullshit.

@trainnerd3029 2 жыл бұрын

Were they there before you moved in or did they build them after?

@1gtmach 2 жыл бұрын

@@trainnerd3029 2 years after. Was so peaceful before. Walk around my house enjoying my new blooms in spring, quiet. Bonfires at night, looking at the stars, quiet. Now constant machine, man made noise and believe me, it does not sound like wind blowing through the trees .

@samsonsoturian6013 2 жыл бұрын

Quit whining

@trainnerd3029 2 жыл бұрын

@@1gtmach That sucks brother! It’s a proven failed technology… The lefties just can’t let it go though

@1gtmach 2 жыл бұрын

@@samsonsoturian6013 bite me.