Laser Cutting LEATHER WET MOLDS

Laser Cutting LEATHER WET MOLDS - Valet Tray

Рет қаралды 9,342

Жыл бұрын

Check out our leather goods:
www.springbokcraftco.etsy.com
XTOOL Laser Cutter
D1 Pro: www.xtool.com/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting-b?ref=lUwy8ajWwgcEJK&
LEATHERCRAFT GEAR:
Hole Punches: amzn.to/2SSGieV
Corner Punches: amzn.to/3blMRwI
BUDGET Custom Brass Stamps: s.click.aliexpress.com/e/_AnPkE7
BUDGET Acrylic Dies for Clicker Press: s.click.aliexpress.com/e/_9J5Bv5
Slot Punches: amzn.to/3uDJiZC
Oblong Punches:amzn.to/3ySZidA
Pricking Irons: WUTA Leather - s.click.aliexpress.com/e/_AOPdux
Budget Irons: Tandy Leather’s Irons or Seiwa.
Edge Bevelers: amzn.to/3S12Gwl
Strap Cutter: amzn.to/3ydpboi
Mallet: Barry King Mallet (Rocky Mountain Leather Supply)
Hot Stamping Machine: amzn.to/2RSBQfm
Gold Foil: amzn.to/33EE6th
Cutting Mat: amzn.to/3obURpm
Cutting Board (For hammering): amzn.to/33HZA8I
1 Ton Arbor Press: Princess Auto
4 Ton Clicker Press: amzn.to/3oh3XkQ
Refillable Dye Markers: amzn.to/3QDWc4U
Burnishing Agent Tokonole: amzn.to/3tLitSS
Best Scissors Ever: amzn.to/3ffEcwT
Music:
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/andrey-rossi/seize-the-day
License code: 3DGKQTJYESOOJQIN
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/soundroll/the-pop
License code: 37JRCON5GA6MDYKY
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: kzfaq.info/get/bejne/geCBnLVyp7ylgp8.html

Пікірлер: 37

@Scadaboy 5 ай бұрын

A roundover bit in a small hand held router would likely be the ticket to ease the edges to avoid tearing the leather.

@matchstickdesignco Жыл бұрын

Your sound effects had me rolling! I actually snort-laughed when I heard the spaghetti slurping sound with the stitching. If the leatherworking business ever dries up, you have a "sound" future as a foley artist. 🤣

@SpringbokCraftCo Жыл бұрын

HA. i'm glad someone mentioned that. that was easily the thing I am most proud of.

@marialinkhart5235 5 ай бұрын

Love this. Well done

@chucklenz9011 Жыл бұрын

Failure is just one (or the last) step to success.

@chucklenz9011 Жыл бұрын

I made about 4 - 1” deep trays for the man of the house and finished it off with glued on edging. They turned out very nice. The lady’s asked for deeper ones for keys and such so I glued and screwed two of forms together to make a 2” deep tray….and I got a couple of requests for a 3” deep tray for a table centerpiece. So I bought 3 forms and now am in process of making 3 -4 to see how they sell. I’ve used dyes and natural finishing colors for all and I finish the edges in with edging in a contrasting color. If I had the sewing machine to sew the edging rather than hot glueing they would be a lot nicer. Maybe someday.

@bbrachman Жыл бұрын

Corter Leather has a video on wet molding trays like this (sort of) He puts both pieces of leather in the same mold to form and dry. That way, your glue surfaces match exactly and you may not have the same visible seam on the bottom. The other trick is to use thicker leather on the outside so the thinner inside leather will not move it. You idea is terrific. The concept works so well. On another note, your drawing was successful because it conveyed the idea to us viewers. Ben's drawing was very detailed. Not everyone can draw that way. But communicating is the key to a successful drawing.

@SpringbokCraftCo Жыл бұрын

thanks so much! that's a great tip. For this particular tray, because they were 2 different shapes it wouldn't have worked.

@dave131 6 ай бұрын

That was great !! And the leatherwork was also oustanding ! BANG lmao

@Euroky1 7 ай бұрын

I always thought all the mold surfaces should be varnished or shellac’d (or HodgePodged, in you case) so the leather releases easily. Interesting to see I might not need that step… Good job, nice concept!

@paulriggs42 Жыл бұрын

Such a cool project ! Great job

@SpringbokCraftCo Жыл бұрын

Thanks so much Paul!

@InspiredByEverything 6 ай бұрын

The sound effects! 😂 You missed your calling as a foley artist.

@nadrojenyaw Жыл бұрын

You came up in my feed. I am now following. Great sound effects, you are awesome. I'm just starting with leather, hoping to one day have a laser cutter. Final product looks great.

@SpringbokCraftCo Жыл бұрын

thanks for watching Wayne!

@tzoody Жыл бұрын

Awesome video!!!

@DarkMoonEmporium Жыл бұрын

Vinegar does a great job of removing the soot left after laser cutting plywood. I don't know why but it does!

@slowcrawlrc6163 Жыл бұрын

Great job! You should fill the ridge between the two sections with a mixture of leather dust and glue. That would help the ridge keep its shape. You can buy 5 pound bags of leather dust from one of the major leather craft suppliers. I really enjoy your videos!

@SpringbokCraftCo Жыл бұрын

thanks for that idea! I'm going to have to try that sometime.

@lvxleather Жыл бұрын

Ben is a smart man 🤣

@atienne_navarre Жыл бұрын

I love your videos. You're funny.😀

@SpringbokCraftCo Жыл бұрын

haha! appreciate that. thanks!

@pez69 10 ай бұрын

How big of a gap for the leather was there between the inner and outer pieces of wood?

@mikestanfield3584 Жыл бұрын

What kind and thickess of leather did u use? Great video.

@petergallina1610 Жыл бұрын

Would totally buy one of these molds. for sale??

@eskelindskov8578 Жыл бұрын

I can’t wait to try this out. How much relief did you give the mold (how muc bigger was the ring that went around it)?

@SpringbokCraftCo Жыл бұрын

0.175 inches!

@bradleyjohnson452 Жыл бұрын

@@SpringbokCraftCo Is the 0.175" the thickness of the leather?

@JohnVanderbeck Жыл бұрын

I would assume you could 3d print the molds as well. Can't think of any reason it wouldn't work?

@SpringbokCraftCo Жыл бұрын

definitely! I have some plans to try that out soon!

@christmasco.6015 Жыл бұрын

Isn't Mod Podge water soluble?

@SpringbokCraftCo Жыл бұрын

Yep, it is. Definitely wouldn't trust this to hold up very long. They do have a 'dishwasher safe/waterproof' version that'd prob work a bit better. But I'll eventually have to use some actual wood finish for sure.

@jeffallen3382 Жыл бұрын

I am making a leather guitar strap for a friend and need to find someone with a laser cutter to cut 3 letters/initials out. I can't get anyone near me to respond to my emails sent to theiraser cutting websites. Would you be able to cut the letters out for me if I sent you this leather I have? I can't afford to buy a laser cutter just yet but I'd be willing to pay you for your time?

@SpringbokCraftCo Жыл бұрын

Hey Jeff, thanks for reaching out! I don't currently do any custom work but check out LeatherwoodTrading on Etsy.

@jeffallen3382 Жыл бұрын

@@SpringbokCraftCo Thank you, I appreciate the help.