Laser Engraving for Beginners: How to Engrave a Bamboo Cutting Board
Рет қаралды 2,502
2 ай бұрынLaser Engraving for Beginners: How to Engrave a Bamboo Cutting Board
I think I am falling in love with the WeCreat Laser Engraver and Cutting Machine! I am going to demonstrate how I added this Bamboo Cutting Board to the WeCreat software in order to engrave this super cute cutting board. When I found this design on the Creative Fabrica Website, I knew it was just perfect for me. Cooking is definitely not my ministry and since I have had this cutting board for over 2 years, it was time for me to put it to good use!
I used the following materials for this tutorial:
WeCreat Laser Engraver and Cutting Machine: shrsl.com/4iq61
Bamboo Cutting Board: Purchased from Ikea
File from Creative Fabrica: www.creativefabrica.com/produ...
All of the tutorials on my channel are made for crafting beginners of all types. I am currently working on increasing my playlists with my Cricut, Siser Romeo, Ricoma Embroidery Machine, Sublimation Crafts, WeCreat Vision Laser Engraver and Cutting Machine, and a variety of other crafts. In each tutorial, I promise to take you through the process step-by-step and not hide any mistakes! I hope you will join me on my crafting journey!
This is fun and I hope you are enjoying the ride!
My Equipment:
☑️Adjustable Table: amzn.to/3NOSGGb
☑️Craft Desk: amzn.to/48dKUxX
☑️Heat Press Cart: amzn.to/4aEz1m7
☑️16 x 20 Walapress: craftingwithdelonda.com/16x20...
☑️Heat Press Top Cover: craftingwithdelonda.com/topcover
☑️Heat Press Lower Platen Cover: craftingwithdelonda.com/lower...
☑️Siser Romeo: craftingwithdelonda.com/siser...
The links above are affiliate links and I will earn a commission from your purchase, at no additional cost to you.
Come and get social with me:
👉Links to all of my socials: linktr.ee/craftingwithdelonda
👉My Website - craftingwithdelonda.com/
👉My Etsy shop - www.etsy.com/shop/craftingwit...
👉Instagram - / cricutingwithdelonda
👉Facebook - / 272801197679910
👉Pinterest - pin.it/2ROzvx3
👉Creative Fabrica - craftingwithdelonda.com/creat...
👉TikTok - / cricutingwithdelo
Thanks for joining me!
Bye
#wecreate #lasermachine #laserengraving
@johannevinet5083 2 ай бұрын
It is beautiful , for myself, I would engrave it lighter (it looks black on my screen). Thanks for showing us this project.
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@staceycollins9232 2 ай бұрын
I love it! I actually cut mine with power tools and use a wood burner. I have tons of lumber to cut, shape and burn that I didn’t get done for gifts last Christmas season because I broke my arms. I might be considering this machine because it will help me take some of the labor off of my body. Thanks for the video.
@catnippetsitting 2 ай бұрын
So pretty! Thanks for sharing. Love your content. You’re a joy to watch and have a beautiful smile!
@CraftingwithDelonda 2 ай бұрын
Thank you so much!
@martahoshell7934 2 ай бұрын
Delonda, I LOVE IT! I like the coloring you choose. So now I think I would like a We Create!
@CraftingwithDelonda 2 ай бұрын
Thank you very much 😊 I honestly think I love this equally to the Ricoma 😮
@rlovelanders 2 ай бұрын
I love how that turned out.
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@Mz.Joys1 2 ай бұрын
You know, I can't say enough.Good things about you.I just appreciate you so much. I would like to lead to that shirt you have on.
@CraftingwithDelonda 2 ай бұрын
Thank you so much! I made this shirt in this tutorial. kzfaq.info/get/bejne/gp-hYLN4mMiteok.html
@saneauto 2 ай бұрын
I mostly do bigger projects with hand held power tools but Im thinking about getting some CNC or laser stuff to engrave stuff and my signature on my creations.
@CraftingwithDelonda 2 ай бұрын
You should definitely do it. I don't think I needed to go this slowly.
@vmoore1257 2 ай бұрын
WoW Delonda I really LOVE it! Now I want a We Create! LOL
@CraftingwithDelonda 2 ай бұрын
I am trying so hard to stay focused on one machine 😫😫😫😫. I am struggling 😂
@debbiegiebel1228 21 күн бұрын
I have been using Lysol wipes to clean the black resin off the edges of the lettering.
@marybcreative 2 ай бұрын
Love it! ❤❤
@mrgscustomtees3960 2 ай бұрын
If you weld or combine the design, it would also help decrease your burn time, the laser head would not have to jump around. i find i get better results and faster times when i combine or weld the image together, unless im doing and engrave and outline.
@CraftingwithDelonda 2 ай бұрын
Thank you so much for letting me know that. I cannot tell you how much I appreciate that.
@GeorgetteFields-ti8ex 2 ай бұрын
That’s just plain awesome
@CraftingwithDelonda 2 ай бұрын
Thank you!
@marthaalvarez214 2 ай бұрын
It turned out great! I love the color you used. I have been looking at this machine for awhile. Hopefully one day. Thanks for sharing.❤
@CraftingwithDelonda 2 ай бұрын
This machine has been a game changer for me. Between this and the embroidery machine, I have fallen in love with crafting all over again.
@mylenesmith7347 2 ай бұрын
It turned out great.
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@reneemeyer5217 2 ай бұрын
Came out great and I love how excited you get when you complete a project you love
@CraftingwithDelonda 2 ай бұрын
Thank you!
@morgan3074 2 ай бұрын
It’s giving professional cutting board queen 👩🏽🍳
@CraftingwithDelonda 2 ай бұрын
😂😂😂 you need help!...
@AuntWanda 2 ай бұрын
Well wow! This is awesome I love this. I love it dark I think you did great with this. ❤❤
@CraftingwithDelonda 2 ай бұрын
Thank you ❤
@sheliapower4566 2 ай бұрын
I like it just like you have it!
@CraftingwithDelonda 2 ай бұрын
Thank you very much!
@beverlysmith8482 2 ай бұрын
I love it just the way it is
@CraftingwithDelonda 2 ай бұрын
Thank you so much ❤️
@craftydiy935 Ай бұрын
Wow that is nice!!
@CraftingwithDelonda Ай бұрын
Thank you ❤️
@deborahhemmings7368 2 ай бұрын
I love it also. Thank you for the video. I am thinking of purchasing a We Create soon.
@CraftingwithDelonda 2 ай бұрын
I am just going to say, I have purchased more cutting boards and I am trying to figure out a way to balance my content 😂
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@margoashley6166 2 ай бұрын
I love it, I've been trying to do that also.
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@jvjv7085 2 ай бұрын
Very Nice!
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@jessiegibson9023 2 ай бұрын
Good video thanks looks good ❤
@CraftingwithDelonda 2 ай бұрын
Thank you too
@user-co6wi1ni2y 2 ай бұрын
I love it!!!
@CraftingwithDelonda 2 ай бұрын
Thank you 😊
@user-co6wi1ni2y 2 ай бұрын
I was checking on the price. 😳 not saying is not worthy 😂 but it still want to own one. Do you only own that one or do you have another laser cutting machine?
@CraftingwithDelonda 2 ай бұрын
This is the only one I have and I honestly don't have a desire for a second one.
@user-ve8ne6uy2w 2 ай бұрын
I was so Jealous when I saw you got to work with the WE Create machine! I have an X Tool D-1 20W, I really like it but I would love to have the camera and enclosure options. They have truly made it easy to get into laser crafts. Don't forget the Acrylics you can do with it.
@CraftingwithDelonda 2 ай бұрын
Awe, thank you! I am excited to work with them. So far, I am LOVING this machine so much. It has been a fantastic addition to my crafting life. I don't sell my crafts; but I have been able to make beautiful gifts for others.
@SonyKaye 2 ай бұрын
Love your shirt
@CraftingwithDelonda 2 ай бұрын
Thank you!
@ConnieRichardson-ol8yj 2 ай бұрын
Very nice
@CraftingwithDelonda 2 ай бұрын
Thanks!
@angelaarrington9296 2 ай бұрын
I think it is perfect
@CraftingwithDelonda 2 ай бұрын
Thank you ❤
@merediths9698 2 ай бұрын
I love it too! That's amazing! I like it just like that! Do you have to seal it after engraving?
@CraftingwithDelonda 2 ай бұрын
Thanks and nope! I don't think I need to seal it.
@GeorgetteFields-ti8ex 2 ай бұрын
❤love the bamboo cutting board!! I can’t fit another machine in my room!!😢
@CraftingwithDelonda 2 ай бұрын
Listen! The number of times my husband has said "she shed"...
@ethelsmith-ames6089 2 ай бұрын
Very nice❤😂
@CraftingwithDelonda 2 ай бұрын
Thank you ❤️
@saneauto 2 ай бұрын
8:02 Yeah next set of shelves I build I need to get one of those and engrave something nice on the brackets I make. Have you tried it on metal yet?
@CraftingwithDelonda 2 ай бұрын
Thanks! I haven't tried it on metal since I recalibrate it, but I am going to try it soon. I did not realize it would be this easy.
@GeorgetteFields-ti8ex 2 ай бұрын
I can’t purchase another machine!! My husband will have to give up his man cave because I would need more space!! I want that laser machine!! Hey, I’m about to retire again for the second time!! Maybe a retirement gift 🙌🏾💰🥰👀🎉🎊🎁
@CraftingwithDelonda 2 ай бұрын
You can do it! I say go for it and act surprised when it arrives, lol
@GeorgetteFields-ti8ex 2 ай бұрын
Seriously thinking about it!!
@brendafogerty1685 Ай бұрын
Have you tried cutting out wodden earring shapes and engraving very intricate designs on them? I'm wondering how intricate this laser can cut.
@CraftingwithDelonda Ай бұрын
The most projects I have ever done was when I first unboxed it. Here is the link: kzfaq.info/get/bejne/rtuDZJWqqN24lqc.html
@erin.olliart 2 ай бұрын
This looks nice. Did you end up washing it ? Was it lighter after a wash?
@CraftingwithDelonda 2 ай бұрын
Thank you so much! I have not washed it; but I do recommend using a damp cloth to wipe it.
@GeorgetteFields-ti8ex 2 ай бұрын
I’m about to check out the cost!💲 I really think I want the laser machine!!
@CraftingwithDelonda 2 ай бұрын
It is so much easier than I thought. I haven't been using it because I needed to calibrate it and I was afraid.
@mtz3843 14 күн бұрын
after you finished the board did you sand it alittle to get the blood off?
@CraftingwithDelonda 14 күн бұрын
Blood?? No
@mtz3843 14 күн бұрын
@@CraftingwithDelonda i mint burn, sorry
@Ladybear09 2 ай бұрын
Can you use this as an actual cutting board?
@CraftingwithDelonda 2 ай бұрын
Yes!
@Ladybear09 2 ай бұрын
@@CraftingwithDelonda my husband will Love this!!!
@GeorgetteFields-ti8ex 2 ай бұрын
Oh wow! I didn’t think you could.
@LanceMcGrew 2 ай бұрын
Anyone else in the house complain about the smell of burning wood?
@CraftingwithDelonda 2 ай бұрын
Lol, nope. It actually wasn't bad at all.
@GeorgetteFields-ti8ex 2 ай бұрын
@@CraftingwithDelonda Do you have the laser with the fume unit?
@CraftingwithDelonda 2 ай бұрын
Yes, but if you are near a window...that is better.
Crafting with Delonda
Рет қаралды 3,4 М.
Angel B. Designs
Рет қаралды 2,4 М.
Cool Items Official
Рет қаралды 21 МЛН
Crafting with Delonda
Рет қаралды 1,5 М.
Elephant Memories by JoBeMac Studios
Рет қаралды 131 М.
Small Fry Creations
Рет қаралды 541 М.
Cornelius Creations
Рет қаралды 18 М.
Handcrafted by Terry G
Рет қаралды 6 М.