Lasfit 9005 60w LED Head Light Upgrade | Dodge Durango 2011-2021 |DIY

Рет қаралды 36,624

Күн бұрын

I'm extremely happy and impressed with these 9005 Lasfit LED high/low beam bulbs. No tools required to install them. If you have any questions leave a comment in the video. Thanks for watching and your support 🙏, if you haven't already please subscribe!
If you would like to purchase these or any other Lasfit product please use my link below along with my 10% off promo code below!
9005 headlight bulbs for Durango:
lddy.no/tekd
Durango H11 switchback Fog lights:
lddy.no/teig
All other bulbs:
lddy.no/rbjn
Discount code "DanVilla" for 10% off site wide
Instagram:
DanVilla:
dan_villa83...
#lasfitautolighting

Пікірлер: 104

@anthonyclark-ee4jy 2 жыл бұрын

Dan! Loved the advice you put out. Got both my headlights and fog lights in the mail yesterday! Ordered them after watching your channel. Lasfit said they don't ship to Canada so I wasn't able to use your reference code. Lucky for me amazon Canada had them for about the same $. Put em in, simple to do for a chunky 69 yr old! Went for a drive in the country darkness last night and WOW!! Thanks again😁

@DanVilla7 2 жыл бұрын

Awesome, glad I could help!

@1moorehead 4 ай бұрын

I just order a pair. Great video.

@furiousstylze1 3 жыл бұрын

There is a dead spot where the thicker part of the bulb is and I wondering should that be up or down, you are the only one that explains that, thanks a million problem solved! Liked and subscribed.

@DanVilla7 3 жыл бұрын

You're very welcome glad I could help! Thanks for the sub!

@harleminthebuildn9234 2 жыл бұрын

TOP MARKS MATE 👍🏾👍🏾👍🏾👍🏾👍🏾

@davebighos8370 3 жыл бұрын

Thanks a lot. I need this set myself. Just ordered and used your code.. good looking out and great install vid!

@DanVilla7 3 жыл бұрын

No problem and thanks for helping support the channel! I also made a video of the foglight installation if you haven't seen it. It's a much faster install

@davebighos8370 3 жыл бұрын

Well got them in. But I noticed the passenger side hotspot is up a tad higher and if you walk 50’ or so and crouch down it shines through the projector super bright while drivers side is not as bright. Went up against a wall about 10’ and noticed Passenger side hot spot is a bit higher than drivers?? Any ideas?? Thanks. I’m wondering if it’s a factory projector thing to not blind on coming?

@DanVilla7 3 жыл бұрын

@@davebighos8370 do you have the bulbs set vertically the way I showed in the video? That will play a huge role in the beam pattern.

@davebighos8370 3 жыл бұрын

@@DanVilla7 yes. The wires are upward just like your vid.

@DanVilla7 3 жыл бұрын

@@davebighos8370 Hrmmm.... could it be that the locking part isn't flush and causing the bulb to have a slight angle?

@DAREWAGZ 10 ай бұрын

Great video! Thanks bro....saved my ass.

@DanVilla7 10 ай бұрын

You got it!

@tmac_city3478 Жыл бұрын

saved me alot of money

@badillostyle 3 жыл бұрын

Good video

@melonyrosario9618 Жыл бұрын

Thank you for this video it helped me replace my own bulbs. But now I need to fix the aiming of my headlights they're too low. How do I raise the beam? I have a 2015 Durango.

@masterofbass1351 2 жыл бұрын

Installed the headlights on my 2018 Durango. Fit perfectly. Thanks for the tip on how to line them up (wire on top) is the best way. Thanks again. What’s next on your Durango?

@DanVilla7 2 жыл бұрын

You're very welcome! My wife actually drives it so not much more for now.

@masterofbass1351 2 жыл бұрын

@@DanVilla7 oh ok. I’ll let u know how the trim comes out. Trying the stuff you recommend this weekend.

@nizo6673 Жыл бұрын

Hey man so I have projector headlamps and I can’t tell if they are correct alignment, how do I put them in the correct position??

@nickcarroll9706 2 жыл бұрын

I know it’s been a year but I just saw your video and first of all that’s so dope you posted that! And did you get these of Amazon?

@DanVilla7 2 жыл бұрын

I have a link in the description for them. If you use that link you can use my discount code "DanVilla" to get 10% off

@JVMPerformanceDepot Жыл бұрын

Are they really supposed to go with the wire on up position?

@elfidoleyva7528 Жыл бұрын

Nice

@marchondoucet Жыл бұрын

Did you connect the to a D3S plug connection

@Maddmaxx0007 2 жыл бұрын

Wow what great review and these lights are just what I need my stock just suck can’t see anything I was checking the site kinda confused but will this work for my 2017 Dodge Durango GT or can you stear me to what will work once again great install review Thanks

@DanVilla7 2 жыл бұрын

Thank you. The links are always in the description of my videos. Either way here are the links for both the headlights and switchback fogs. If you could use those it would be greatly appreciated 9005 headlight bulbs for Durango: lddy.no/tekd Durango H11 switchback Fog lights: lddy.no/teig

@Maddmaxx0007 2 жыл бұрын

@@DanVilla7 thanks I be checking again see what elas you add to yours Thanks

@ttinay3781 3 жыл бұрын

Hi Dan, thank you for great demonstration. However, I am confused. I have 2015 Durango and LasFit just sent me LAplus9012-N whereas you are installing LAPlus 9005-N. Which one is correct? Thank you for your response.

@DanVilla7 3 жыл бұрын

The one you have is correct for your year. The 2020 which is mine is a different size than your 2015.

@ttinay3781 3 жыл бұрын

Thank u very much for the prompt response.

@td1683 2 ай бұрын

Thanks for the info! I’m Definitely going to do this conversion now that I see how simple it is. The stock lighting is terrible. Are the fog lights as easy to do? One other question… do you reinstall the dust cover? I’ve seen some people say that it will overheat the bulb, even with the bulb fan. I know it’s been a while since you did this installation so you would be a good judge at this stage. Thanks again!

@DanVilla7 2 ай бұрын

No problem. I reinstalled the dust caps and zero issues to date. The foglights are way easier to install than the headlights

@td1683 2 ай бұрын

@@DanVilla7 thanks for the quick response!

@sergiolima4465 8 ай бұрын

Hi. Gratulationa for the video. I have a question: the correct position of the led, is turn to high or to down? Thanks.

@DanVilla7 8 ай бұрын

I'm not exactly sure what you are referring to but everything about bulb position is in the video.

@RB-nh3rb Жыл бұрын

So the Dodge Durango 2014 model I have says it takes 9012 did the lights change after this year?

@DanVilla7 Жыл бұрын

I'm not sure, lasfit has pull down menus to find the correct bulbs for your year make and model. Heres a link to their main page lddy.no/rbjn

@Ravip80 2 жыл бұрын

Do I need a decoder for these led headlights? I know some Durango the LED’s flicker.

@DanVilla7 2 жыл бұрын

No extra parts necessary, no error codes or warning lights. There's a link in the description for them

@DJoseR1313 Жыл бұрын

About to purchase these. Now I do have a question. The strip of light that is under the light you just install… mines went out, how can I replace them?

@DanVilla7 Жыл бұрын

Not sure that can be fixed may need a new headlight assembly

@davidbritt39 3 жыл бұрын

What are the exact ones needed for 2014 dodge Durango?...both sets.

@DanVilla7 3 жыл бұрын

The links for them are in the description

@Andre-kx6tl 2 жыл бұрын

Great video, I ordered a pair of lasfit 9005 for my 2019 Durango. For some reason they don't seem to fit tightly into the headlight assembly. This is isn't my first time changing light bulbs on a car. led or halogens. First time on the Durango though. So the issue is the bulb tends to be loose and shaky, I keep putting back the original halogen bulb to see if I was just doing something wrong, but after 1.5hrs I gave up. Has anyone experience this? looking for some pointers.

@DanVilla7 2 жыл бұрын

Thanks! I actually did cover that in the video. Go to @3:25 (you can click it) and I explain how to fix it very easily.

@Andre-kx6tl 2 жыл бұрын

@@DanVilla7 ok cool thanks.

@DanVilla7 2 жыл бұрын

You got it

@shane401 2 жыл бұрын

Ran into this last night because the base with the prongs are on a O ring and when you try to turn to lock in the light spins instead of the base being attached to the bulb. I to gave up and gonna return and find a different brand

@DanVilla7 2 жыл бұрын

@@shane401 I explain that @ 4:07

@LATINTHRONE 3 жыл бұрын

My 2012 rt has different light bulbs. Would these still work?

@DanVilla7 3 жыл бұрын

Do you have halogens or HIDs?

@LATINTHRONE 3 жыл бұрын

@@DanVilla7 They are HID stock but they are not that bright. They have a square back I want LEDS. Saw your other video and was thinking of getting the fog lights instead and adding those on. I ordered them and hope they fit.

@LATINTHRONE 3 жыл бұрын

@@DanVilla7 The stock hids are D1S

@DanVilla7 3 жыл бұрын

@@LATINTHRONE they make the d1s replacements should work fine. Their stuff is great

@johnpacheco8898 3 жыл бұрын

Do you just need one bulb for both low and high beams? Or do you need to buy 2?

@DanVilla7 3 жыл бұрын

Just 1 set. The bulb is the same, the projector moves making the low beam a high beam. Here's the link: lddy.no/tekd

@johnpacheco8898 3 жыл бұрын

@@DanVilla7 thanks man!

@will5577 2 жыл бұрын

Did you re-install the dust covers after replacing the bulbs?

@DanVilla7 2 жыл бұрын

Yes, was in the video

@Maddmaxx0007 Жыл бұрын

Ok found my answer did you have any over heading with them on so far I did same as you just felt that with the cover on it get more hotter thanks Dan

@nathanlee4678 2 жыл бұрын

It seems like it doesn't project high enough

@wblue7707 2 жыл бұрын

Do these Durango's headlight have any vent? Led produces lots of heat, I'm afraid with Dust cap and no vent will burn headlight housing bcz of extensive heat/Temperature.

@DanVilla7 2 жыл бұрын

All headlight housings have a built in vent tube. These have fans on them as shown in the video. No issues with them almost a year since I installed them

@wblue7707 2 жыл бұрын

@@DanVilla7 Dan, did you put dust cap back on?

@DanVilla7 2 жыл бұрын

@W Blue yes was in the video, if you skim the videos you miss important information

@wblue7707 2 жыл бұрын

@@DanVilla7 Thank You.

@Alwaysstrivenprosper 2 жыл бұрын

Did u have a issue puttin the dust cap back on??

@DanVilla7 2 жыл бұрын

Everything fit perfectly no issues other than it's an awkward angel to get it back on sometimes

@KS-ux1jq Жыл бұрын

hello I have 2018 dodge durango, can i use the 100 w 10000Lm or 72W 8000lm bulbs?

@DanVilla7 Жыл бұрын

Yes as long and they bulb size is the same

@KS-ux1jq Жыл бұрын

@@DanVilla7 thank you for the response. The other question is the 2018 dodge Durango GT electrical circuit capable of handling 72w and 100w bulbs?

@mikeygrizz23 Жыл бұрын

Have you had any issues with hyper blink?

@DanVilla7 Жыл бұрын

Haven't had a single issue

@TheBarlaz 2 жыл бұрын

Do the turn off after 20min? And turn back on after??? How can I fix

@DanVilla7 2 жыл бұрын

Not at all. Contact the company directly

@vladimirm9521 2 жыл бұрын

Does it need the anti flicker attachment thingy I forgot what it's called🤦‍♂️

@DanVilla7 2 жыл бұрын

Not necessary everything you need is there. No flickering or bulb out warning lights. There's a link in the description for them

@stillmanchad2326 2 жыл бұрын

How did you get the driver tucked in and still get the dust cover on?

@DanVilla7 2 жыл бұрын

It was a while ago but I don't recall the drivers side being much different from the passenger side. Possibly the bulb isn't all the way locked in place?

@stillmanchad2326 2 жыл бұрын

@@DanVilla7 I just rewatched it. Not driver side (the driver) on the light itself. I purchased the sv.4 led bulbs and they have a large driver that I cannot fit inside the dust cover. Thanks for the reply and great content.

@DanVilla7 2 жыл бұрын

Oh sorry I misread it. Different brands may not fit the same. And thanks I appreciate it!

@rudygoldsmith5397 Жыл бұрын

Nice does this fit for a 2020 Durango

@DanVilla7 Жыл бұрын

Yep mine is a 2020

@rudygoldsmith5397 Жыл бұрын

Thanks man I subscribed to your channel and ordered them

@laneboone8739 3 жыл бұрын

Did you have any issues with flickering?

@DanVilla7 3 жыл бұрын

Nope these function flawlessly, no flickering or bulb out warnings. I'm extremely happy with these and the switch back foglights I did.

@laneboone8739 3 жыл бұрын

@@DanVilla7 thank you!

@DanVilla7 3 жыл бұрын

@@laneboone8739 no problem! There's a link in the description of the video if you decide to order them.

@laneboone8739 3 жыл бұрын

@@DanVilla7 I saw these on Amazon a while back but they said for high beam

@DanVilla7 3 жыл бұрын

It does both functions, the actual projector moves to create a low and highbeam pattern.

@TheJragan1990 3 жыл бұрын

Well that sucks because the 2017 Durango rt does not have the same connector for head lights. It’s like a USB port

@DanVilla7 3 жыл бұрын

But wouldn't the R/T already have HID's?

@sfb1976 2 жыл бұрын

The housing is too loose so trying to instal it just pops off. I had to return these to find much better units

@DanVilla7 2 жыл бұрын

Did you add the oem gasket like I mentioned in the video?