LaunchPad: Ancient Greek Vase Production and the Black-Figure Technique

Рет қаралды 222,881

11 жыл бұрын

Used for the storage and shipment of grains, wine, and other goods, as well as in the all-male Greek drinking party, known as the symposium, ancient Greek vases were decorated with a variety of subjects ranging from scenes of everyday life to the tales of heroes and gods. The two most popular techniques of vase decoration were the black-figure technique, so-named because the figures were painted black, and the red-figure technique, in which the figures were left the red color of the clay. The black-figure technique developed around 700 B.C. and remained the most popular Greek pottery style until about 530 B.C., when the red-figure technique was developed, eventually surpassing it in popularity. This video illustrates the techniques used in the making and decorating of a black-figure amphora (storage jar) in the Art Institute of Chicago's collection.
This video was produced with the generous support of a Long Range Fund grant provided by the Community Associates of the Art Institute of Chicago. It was created for LaunchPad, a program of digital interpretive materials that supplement the viewing of works of art on display in the Art Institute of Chicago's galleries.

Пікірлер: 39

@ElagabalusRex 7 жыл бұрын

On second thought, making a counterfeit Amasis looks like more trouble than its worth.

@soulak6332 2 жыл бұрын

Thank you for the clarity of process!!

@rzeka 4 жыл бұрын

Spot-on How it's Made impression, I love it

@robcoghan5204 3 жыл бұрын

Terse, outstanding!

@lilyborrego9482 3 жыл бұрын

To make a vase, workers first mined naturally occurring clay and fixed it with water in the outdoor pools Impurities of the clay would sink to the bottom As the water evaporated, it left behind a layer of purified clay, which was then kneaded by workmen to make it more malleable To start to form a vase, a mass of clay is centered on a potter’s wheel In ancient times, the wheel would have been rotated manually by the potter or his assistant Moden electric powered wheel works the same way With his hands, the potter forms a depression in the clay By pulling outward and upward slowly, he carefully forms the clay into the desired shape depending on the type of vessel We do not know exactly what tools ancient craftsmen employed, but in addition to their hands, they may have used wood, metal, and sponges. The next day, the vessel has dried and excess clay is trimmed away and the excess is smoothed A separately made food is applied for stability. Handles made from coiled clay complete the shape of the vessel Once the vessel has been shaped, it is prepared for painting A fine clay, called slip, is painted onto the area that the artisan whished to be black To provide a background for further decoration, an unpainted area will be decorated with a scene [ainted in the black-figure technique After the clay had dried to a leathery, hard texture, the base painted could make preliminary sketches in charcoal which would disappear later during firing Using the charcoal sketched as a guide, slip would be used to ass silhouetted forms, often human figures Details and internal lines were then incised through the slip to reveal the lighter colored clay below Additional details are usually made with red ochre When fired, it would turn purple to depict blood, clothing, etc To portray white, a pure clay with minimal iron oxide was used, often chosen to depict women’s skin, marble objects, animals, and patterns With the painting complete, the vessel was ready to be fired in a kiln This 3 set process lasted 6 to 8 hours but since there was no precise thermometers or accurate clocks, it required great precision and experience First, the temp was raised to about 1500 degrees Fahrenheit By allowing air into the upper chamber of the kiln, an oxygen-rich atmosphere was created This produced red ferric oxide in both the clay and slip, which caused both to turn red Second, the temp was raised further to about 1700 degrees Fahrenheit Air vents were closed and damp wood or wet leaves were placed in the stoking tunnel of the kiln This created an oxygen-poor and carbon-rich environment This produced black ferrous oxide in the clay and slip, which turned both from red to black At this point, the slip became a glossy shell that was resistant to any further changes In the third and final step, the air was permitted to enter the upper chamber of the kiln again, creating an oxygen-rich environment once more The surface of the vessel not covered in sleep turned from black bac to red, and the glossy, slipcovered areas-such as figures-remained black The kiln required around 12 hours to fully cool down, after which the vases could be removed

@ChefKhaliebRufael 9 жыл бұрын

How much do/did vases like this usually weigh?

@AlexeyChesnok 4 жыл бұрын

Slip had to have some low-melting point additives otherwise it wouldn't create glossy sealed surface. Any info on what these might be?

@JohnDoe-kk9hp 4 жыл бұрын

Its water mixed with a fine clay

@cazek445 2 жыл бұрын

Probably some sort of crushed up glass

@snehalpradhan2318 Жыл бұрын

@@cazek445 it doesn’t need crushed up glass since silica at a particular temperature turns to glass the slip just needs some sort of a low fire flux Which could be soda ash, bone ash, Dolomite etc (I don’t know what though)

@johnbooth1110 8 ай бұрын

im a potter who has done hundreds of this type of firings, you seem to have a mix view on what creates the black gloss. my slips are naturally gloss before firing, if you settle the clay slips long enough i wait 6 months,

@candyman650 3 жыл бұрын

how did you find out about the charcoal sketch?

@solanelukoperse5815 Жыл бұрын

Freehanding such complex design on a so difficultly crafted piece seems very hard, so it's kind of a logical conclusion. Maybe some potters did free hand their design! But all of them? I don't know if there are pieces where we can see sketches, I don't even think they would resist the firing...

@GrandNecro 5 жыл бұрын

what is the slip made of tho?

@kathvg 4 жыл бұрын

GrandNecro coloured clay and water

@johnbooth1110 8 ай бұрын

The slips are Terrasigillata .

@blkhistorydecoded 4 жыл бұрын

In some of the Ancient Greek Black figure art you can tell that the blackness was scratched off. Making it seem that underneath was originally White but purposely painted Black over it.

@sahq5996 2 жыл бұрын

we were not blacks, we will never be. same goes for the egyptians. stick to your own sub-saharan history.

@dieu5041 11 ай бұрын

@@sahq5996black figure pottery was in Greece before red figure pottery, you can check Wikipedia yourself.

@johnbooth3538 10 жыл бұрын

well that was a bit short on details. you for got to mention the use of water in the kiln to aid in reoxidisation at 300 degrees. you for got to mention the ionisation "radiation when using green woods in a kiln. work place health and safety requires that you do list all health warnings. i think, please consult a technician before any one attempts these firings.

@missmia196 5 жыл бұрын

Lmao u fuckn think ancient Greeks were like, "where do u list all the health warnings??😢" lol pussy

@calvindebeverly7410 4 жыл бұрын

@@missmia196 Exactly. They were like "Opps: Hey we need another slave trained in pottery production over here and hurry up about it!"

@artisticgarbage708 4 жыл бұрын

he asked a question. chill out. No need to cuss