Origami 5 Intersecting Tetrahedra Tetrahedron Tutorial Designed by Thomas Hull (ASMR Paper Folding)

Рет қаралды 118,833

5 жыл бұрын

Shop origami paper at our store: www.lavenderhome.co.uk/collec... Subscribe and hit that bell icon to be notified when we upload!
5 Intersecting Tetrahedra is created by Thomas Hull.
In this tutorial I used 30 sheets of 5x15cm paper and a small piece of paper as a note. Glue is optional.
I used 5 different colours to make it easier to follow along.
Difficulty ★★★★★ / Advanced Origami
Timestamps:
0:11 - Step 1: Making a unit
2:14 - Step 2: Making a 3 piece unit
2:44 - Step 3: Making a tetrahedron
3:58 - Step 4: Assembling
Music:
"Little Idea" by www.bensound.com

Пікірлер: 58

@crafter5669 4 жыл бұрын

I barely made one, it took around 4 hrs to make. Thanks for the tutorial :)

@lanap776 3 жыл бұрын

This was very very helpful. Took about 3 hours and a few wrong moves that were corrected after watch-stop-watch. Thank you!

@ronental6424 2 жыл бұрын

I have done a few of these in the past, the best tips I can give you: 1. try to make it with the same colors and order as he does it will make your life a lot easier 2. don't try to make it small size. the bigger the easier, I have done 9x3 cm and it was hell The corner marking with the paper is genius..

@paperart0 14 күн бұрын

i saw this warning, thought "nah i'd win," and proceeded to make it with 3in by 1.5in papers. it was so frustrating trying to get the teeny tiny pockets and tabs to fit in at the very end without them popping open. anyways, i should've heeded your warning, stranger

@anna-fleurfarnsworth104 2 жыл бұрын

I showed my mom this and she started to cry talking about how talented I am lol. thank you so much for making this lovely tutorial!

@aneeshchengappa 3 жыл бұрын

This was definitely the best video i found for this model! Very good idea to label the first triangle as a point of reference, makes everything a little more clear and less confusing as to where each triangle fits in. Thank you for this tutorial

@LavenderHome 3 жыл бұрын

Thank you!

@JG-wg6fz 3 жыл бұрын

It took almost 3 hrs to finish. Thank you for explaining simply and accurately. 👍👍

@dash2318 4 жыл бұрын

i finished in 4 hours straight!! thanks a lot for tutorial!!!!

@dsara6865 3 жыл бұрын

Exceptionally clear tutorial very well done

@lia.yahhhh4233 4 жыл бұрын

This helped alot for me! I didn't quite get what the teacher did, luckily this video is here! Thank you for posting this video!!! 😁😁😁

@muzvid Жыл бұрын

A long time ago, I saw this on the cover of a book by Rick Beech, "Origami! 80 amazing paperfolding projects." I managed to complete 1 tetrahedron, but went no further. Your video may just be the inspiration I needed to finish!!

@stevegoodson9022 Жыл бұрын

Go for it, the assembly is tricky and hurts your brain but the end result is beautiful - just keep it away from cats and children

@trinidadhuertamora9633 4 ай бұрын

¡GRACIAS MAESTRO! LO EXPLICA USTED MUY BIEN, ¡SIN DECIR UNA PALABRA, LO HE ENTENDIDO PERFECTAMENTE! DESDE LA CD. MX. MÉXICO.

@ProGamer-bh1jz Жыл бұрын

The best the clearest ones

@kartikgrover4053 2 жыл бұрын

it took me 5 hours thanks a lot for the tutorial

@kyragd2009 2 жыл бұрын

Great tutorial

@kianr2200 2 жыл бұрын

No matter how many times I make this, I always have to come back to this video for the assembly part😂thanks for this upload

@fizzyd7586 2 жыл бұрын

I found that you can pinch the creases near the connection points to make the pieces stay together much better.

@mariatoni5355 2 ай бұрын

Awesome Work!😍

@user-qi1xb9lu4h 8 ай бұрын

So long ago, I made 4 before. Just needed to remember first stage an last intersection. Thank you 💕

@wrasbur1 3 жыл бұрын

I agree with others who feel this is the best tutorial out there for this model. Does anyone know the weight of the paper he uses? It appears to be "stiffer" than most origami paper, which would be helpful in constructing this model, which I also agree with others is quite difficult.

@LavenderHome 3 жыл бұрын

Thank you! We used 70 gsm paper 🙂

@wrasbur1 3 жыл бұрын

@@LavenderHome Thank you so much for the reply and information

@itismethatguy 2 жыл бұрын

@@LavenderHome Thank you, I spent a lot of time and this was the only tutorial that showed me well how to put the model together

@mauraorigami5302 5 жыл бұрын

fantastico

@hmmmmm8716 4 жыл бұрын

Joining the pieces is hard and I'm only on the the first tetrahedra so I know that this is gonna take m some time

@zokalyx 4 жыл бұрын

It took me like 40min each tetrahedra in average

@ooberbear8138 4 жыл бұрын

Does anyone know the paper's lenght/width ratio? Or does it not matter?

@LavenderHome 4 жыл бұрын

The paper ratio is 3:1. We used 15cm x5cm in this tutorial.

@lazyhummingbird 3 жыл бұрын

Do you think it's easier to use big papers or small ones?

@hollandjo1947 4 жыл бұрын

Took about 2 hours cutting paper and 3 hours assembling but ya know it was worth it 🤔

@lazyhummingbird 3 жыл бұрын

This is beautiful, just one question, are the locks strong enough if made properly?

@origamimadness6313 3 жыл бұрын

I’m pretty sure it is if you just have thin sheets of paper and intertwine the pieces together

@CincCent 3 жыл бұрын

Hi! Best video for this complicated origami! May I link your video in my little blog? Grazie

@LavenderHome 3 жыл бұрын

Of course! 🙂

@issie6374 4 жыл бұрын

How many of each colour do I need?

@issie6374 4 жыл бұрын

It’s 6. For anyone who wanted to know. Also I don’t recommend using thin/ flimsy paper as it is extremely hard

@Casocki 2 жыл бұрын

@@issie6374 lol. I used 3 colors of firm paper and 2 of flimsy paper. Definitely not the prettiest thing ._.

@wongwonglam512 2 жыл бұрын

2nd times the charm [maybe]

@lucaanello-fiorina7251 7 ай бұрын

Does anyone have any tips on getting the tips of the units to actually stay in place? Mine kept falling apart while trying to make a tetrahedra. I used 70 gsm and copy paper

@LavenderHome 7 ай бұрын

put glue on the first tetrahedra. the rest should be falling apart easily while assembling. Check the corner(connecting part) if fully insert. When a tip formed with 3 pieces connected properly, the structure is stable even without glue.

@user-eo5dq3yo4g 4 жыл бұрын

4つ目から混乱する

@OfficialZh0 4 жыл бұрын

I know how to make pieces but idk how to join them, the video Is good but the assembly part i cant reall see well on it. But overall good job

@m-ka6999 9 ай бұрын

2:11

@user-nh1or4ob5o Ай бұрын

uwy u quincunx allah razu olsunnnnnn

@natureinmyname7228 2 жыл бұрын

What should b the length and width of the paper

@LavenderHome 2 жыл бұрын

5x15cm is used in this tutorial

@cienciandre 4 жыл бұрын

I was doing it with A4 paper to test, and since it's almost 20cm x 30 cm I thought I could just cut It in 8 pieces of almost 5cm x 15cm and it would do the trick. It didn't. Measure your pieces correctly guys :/

@kilmameri8844 2 ай бұрын

I did it exactly like you had, one A4 into eight pieces. I'm currently three tetrahedra in and guys... it's going but I sense the people before me and their warnings. I am still on this path, but if I can achieve success is still a gamble

@zohnannor Ай бұрын

I did that first time with 9x9 pieces which I cut in 3 (3:9 = 1:3 ratio), and then for the second one I used A5 (that has 210x148 mm size) which I cut into 7x21 pieces. Both were pretty easy to do.

@imjustnotsus 2 жыл бұрын

Me laughing when not following the rules of origami and using tape after raging with joining the pieces

@areenAIawneh 3 жыл бұрын

The hardest thing I did in my life

@AssPhyxiation 3 жыл бұрын

Have kids.

@areenAIawneh 3 жыл бұрын

@@AssPhyxiation 😆

@user-nh1or4ob5o Ай бұрын

Çok sevdim çoçujlarımka yaptik umarım allah sizi cennetine. Alsın .aöım

@eliandre1416 Жыл бұрын

Thank you, but I tried this with traditional origami paper, and after the 6 most infuriating hours of my life, it fell apart. I'm never doing this again

@LavenderHome Жыл бұрын

oh no. Try the copy paper or strong wrapping paper. standard origami paper is too thin for this model.