They were very safe for my family because we are smart people.
@Tris444_2 жыл бұрын
Survival of the fittest.
@indridcold843316 күн бұрын
They were safe for any family that taught kids right from wrong, and developed child's intelligence. However, there are places where narcotics are legal. What is more dangerous?
@sapper0433 жыл бұрын
Loved these as a kid. Wish they would bring them back or may have to make some too. Thanks.
@johnschmitz5887 Жыл бұрын
They would come back - they're banned in the CFR for sale in the USA
@RavenTheLabrador8 ай бұрын
Why not just 3d print a set like in this video plenty of 3d printing services if you don't have a printer yourself 🙂👍✌️
@leahcimthgirw31632 жыл бұрын
I own several styles of the jarts, my self and family play night time jarts with glow sticks taped to them, so much fun
@ThreeBeerMinimum Жыл бұрын
I am pulling my OG slider darts out for my kids 10th birthday. If you are SOBER AND SAFE they are tons of fun!
@MinnVet3 жыл бұрын
I still have my illegal set since I was a kid.
@wendyokoopa70483 жыл бұрын
Jealous
@Apistevist2 жыл бұрын
If you wish to sell them DM me and we can talk price and shipping.
@wisdomfox8572 жыл бұрын
Its not illegal to iwn but illegal to sale 9n tge market
@caspa_el_diablo31873 жыл бұрын
I have two older ones finally..! My mom used to talk about these damn things all the time then I actually come up on some a very nostalgic moment
@wyatt-rocks3 жыл бұрын
You need to make the hoops. I have the original set still. It has 2 plastic tubing hoops that you aim to land inside. We make the big one 100 points, closer to the thrower, and the small one 500 points, further from the thrower. Much more fun to try to get them inside the circles. I think they're like 1.5 ft diameter and 2.5 ft - I think.
@nobodynoone25002 жыл бұрын
I have one of the original hoops (the other disintegrated) they were just hard plastic tubing. I bet some semi-flexible tubing and a dowel to connect them would be plenty, and easy.
@troybuggle2582 Жыл бұрын
I've got three vintage sets!!! Whoop!!!
@lucbedard7564 Жыл бұрын
i remember that game very well when i was a young kid, at the cottage of my father when i throw i was not very good to throw 30 feet away, but when the long dart came down and the girl did pay attention where it coming down that hit her leg. as the kid i was i felt scared and run off and i never play that game again. Now i'm 61 yrs old and i knew it wasn't my fault, but i felt so guilty and hurt and scare at the same time. i agree this is not a game for kids and i understand why this was banned
@MatthewGuy-lv1oc2 ай бұрын
Very nice, many good memories brought back, 3d printing factory 2 blocks away from my home, Beaverton Ontario. Thanks Matt
@bryanhenry8075 Жыл бұрын
I'm just gonna make a sand mold and use aluminum for the weighted portion , drill and tap. Then use the flexible plastic for the 3d printer. The main tube will stay the same as you have , but the point will be a beam nail cut down that you can get from any hardware store....
@angryroostercreations51943 жыл бұрын
i guess we should ban bicycles. it's the toy that hurt me most as a kid, that and the radio flyer wagon we tied to the back of a bike. i earned an ER visit with that one.
@cruefosho Жыл бұрын
Back then, you learned real fast to get the hell out of the way.
@abelpena8722 Жыл бұрын
Wish I could find a set of these.
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@richardreagan63652 жыл бұрын
I've been looking for a set of these for months!!!
@davideasterling27292 жыл бұрын
Check flea markets, yard/estate sales, and antique shops and keep a sharp eye out for them. I found a set of Lawn Darts, complete in the box, about three years ago at an antique mall. And just a few months ago, in a different antique/thrift shop, I spotted a set of Slider Jarts. They're out there , just be patient and keep hunting. Good luck!
@richardreagan63652 жыл бұрын
Thank you for the information. I will definitely keep my eyes open for a set
@iqcuber8083 Жыл бұрын
Would you be interested in making a set of replacement fins for my set? I only need one ?
@brandonbowerstx Жыл бұрын
Make a disc of pool noodle material and put it just behind the weight so the fin coming down impacts the pool noodle material and is decelerated gently.
@ryanhogge8 Жыл бұрын
I've been joking for a couple of years that while it's illegal to buy or sell lawn darts, it's not illegal to make some and forget them at the local park. I never expected to see someone actually making some of their own. Interesting.
@nobodynoone25002 жыл бұрын
Thats better than the real ones. I know, I own a couple sets. Those look like a Jart replica. There are about a dozen other designs as well, but these were the most common,
@JimmyJam-is1ze Жыл бұрын
I would very much like to buy a set of these for display in my 70’s - 80’s arcade at my house. Please let me know as soon as you are selling them. Thank you!
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@NickJansen872 жыл бұрын
Put a foam washer between the dart and the fun to prevent the plastic from cracking
@RavenTheLabrador8 ай бұрын
You can still buy lawn darts in canada they are not the original brand but i purchased a fww sets of the ones that are still being sold now and honestly im surprised they are being sold because of used irresponsibly they are still just as dangerous so im jot sure how they are getting past regulations that prohibit them in canada and the United States.🙂👍✌️
@CapeCodTrainTodd Жыл бұрын
I loved Jarts as a kid and always imagined them being rockets and the ring a city that needed to be blown up. It is dumb that they were banned but given the intelligence of our society especially these days it was probably a good thing.
@RavenTheLabrador8 ай бұрын
You'd be saying something completely different if you had a child or even just a family member killed by lawn darts. Anyways i still have my original lawn darts they are extremely faded but still work just as good as new 🙂👍✌️
@mitchellragle64154 ай бұрын
@@RavenTheLabradorare you for banning swimming pools. They kill hundreds of children every year. Lawn darts didn’t kill 10 during the entire time they were available
@pklimchuk11 ай бұрын
Hi Kevin. In general is it possible to print fins with a design on them such as a aports team logo in at least two diffferent colors? If so what 3D printer(s) would you suggest for that? Many thanks.
@kevinsgarage11 ай бұрын
The new fins I am printing now are very hard to print, even in one color due to the flexibility, not really for beginners. I think a sticker or paint might be your best bet for a logo. I have red and blue fins, but can do a few other solid colors for an additional $20. My page will be going live in a few days.
@pklimchuk11 ай бұрын
@@kevinsgarage I very much appreciate your honest response and very much look forward to your live page. Thank you
@kevinsgarage11 ай бұрын
Also, 3D printing is a lot of fun and I highly recommend getting into the hobby. Elegoo and Prusa are two great brands to start with.
@michelleslutpuppy43556 ай бұрын
My mom use to buy us regular darts we use to play w/them all the time w/ aboard like darts we never killed each other
@chrisg477 Жыл бұрын
Ebay link doesn't work; delisted? Any way of getting the CAD files or a copy of the drawings?
@fignons_missing_8sec42 жыл бұрын
Any chance I could get the files? I clicked on your link to buy the parts but it’s not active.
@skylerslack123 жыл бұрын
Just label them as roman war darts 😁
@iqcuber8083 Жыл бұрын
Would you be interested in making a set of replacement fins for my set? I only need one?
@kevinurbom99802 жыл бұрын
have you found another way to provide these?
@freehockey9869 Жыл бұрын
Link to buy 3d printed parts does not work....how do I get in touch with you to buy them?
@alexmarcil8372 жыл бұрын
Could you possibly seel the STL files or 3dobject to me so i can print them myself thank you… doesnt need to be perfect.
@tahg10216 ай бұрын
Is your .stl file available somewhere?
@chau82382 жыл бұрын
I have a set of Franklin darts, the safer style with blunt tips and sliding fins, but my fins are cracked and need replaced. Are the fins still available?
@vegas2kse3 жыл бұрын
Can you link to the stl files you used to print?
@kevinsgarage3 жыл бұрын
At this time I have chosen not to release the files, but the plastic parts will be available to purchase soon.
@kevinsgarage3 жыл бұрын
3D printed parts are now for sale here: ebay.us/NcRjN3
@velvetfeer2 жыл бұрын
@@kevinsgarage can’t seem to get the link to your store on ebay
@danpolk2 жыл бұрын
@@kevinsgarage "error page". This is the downside to trying to make money on *everything*.
@tomharder74622 жыл бұрын
Great stuff Looking for files for 3D printer for fins, weight container and caps. I'd be grateful if you would send them my way.
@khobsupsk2 ай бұрын
Do you sell the STL for the whole print set up? Including tips?
@tashawn22223 жыл бұрын
I actually got hit in the head with one and sent to the emergency room when I was 6. Got very lucky and it was just some stitches.
@kevinsgarage3 жыл бұрын
Glad you are OK! These lawn darts are fun, but definitely dangerous.
@googoo-gjoob2 жыл бұрын
id sure love to pay you for a set....for an historical display only, _of course_
@bullhurly77413 жыл бұрын
Are the fins ABS? I believe the originals were made of polyethylene which were more flexible. I am told it's hard to print the fins in poly due to the material shrinks too much.
@kevinsgarage3 жыл бұрын
I printed them out of PLA. They don’t flex, they break, that’s why I redesigned them without the fin points. I’m not sure the original fin design can be printed due to breaking at the layer. But I can see a cast being made and then using a semi flexible resin to cast the part in.
@sbetts100013 жыл бұрын
Just but the legal set for $18, cut the tubes off the fins and use them. They r perfect and flexible.
@bullhurly77413 жыл бұрын
@@sbetts10001 You are correct and they work just as well! I try to pick them up at rummages & at auctions.
@zungagames3 жыл бұрын
I printed some out from thingiverse from TPU. Had to split the file in 2 but they came out pretty great. No breaking with ground impact or other darts hitting them.
@andyhauck7973 Жыл бұрын
What was the file called I cannot find them
@scottlawncare79952 жыл бұрын
I would be interested in buying flights if of quality to stand up
@kevinsgarage2 жыл бұрын
I have them listed on eBay now.
@grivolas21443 жыл бұрын
I would have turned the tips out of solid steal or brass.
@kevinsdead3 жыл бұрын
What infill did you use for the PLA
@kevinsgarage3 жыл бұрын
0%. the design I made uses only 1 shell for the fins and 2 on the tube. This keep the weight down so the CG is in the right spot
@seanmcgrath99873 жыл бұрын
Where did you get the aluminum tubing from? I cannot find the sizing that you used.
@kevinsgarage3 жыл бұрын
McMaster-Carr www.mcmaster.com/89965K461/
@seanmcgrath99873 жыл бұрын
@@kevinsgarage Thanks Kevin. Any chance you can send me the STL files for the tip and washer cover piece?
@Izzy_Free2 жыл бұрын
Just stumbled into this wanted to make a set for my parents are you still making the 3rd printing the fins
@kevinsgarage2 жыл бұрын
eBay removed them since they are associated with banned goods. I am working on getting an alternative secure purchasing method worked out.
@coleymcdevitt37412 жыл бұрын
@@kevinsgarage would love to buy the 3d parts once you can sell them again.
@no_one_from_nowhere Жыл бұрын
Also be aware of pets in the area. Dogs may attempt to catch them when tossed
@mr.slipknot_6sic63 жыл бұрын
You should have made the tips metal and pointy
@kevinsgarage3 жыл бұрын
I could have, but fringing down the threads would have made the tip a bit weaker, and I couldn’t find any metal covers, so I opted for the plastic.
@mr.slipknot_6sic63 жыл бұрын
@@kevinsgarage makes sense
@cynthiakasuba53533 жыл бұрын
@@kevinsgarage Kevin is there a way to get ahold of you personally about these ? I played this game with my Dad. And to have a set would mean everything to me.
@UnpluggedOffRoad3 ай бұрын
Do you sell the 3D printer files
@kevinsgarage3 ай бұрын
I don’t. There are others available online for free though
@berniefarnung1330 Жыл бұрын
unregistered fins set would be nice to get…
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@thomassavu66193 жыл бұрын
How can we get the 3d Printed parts? I do not have access to a printer...
@kevinsgarage3 жыл бұрын
I will be selling the plastic parts soon. If that goes well, I may sell the raw hardware too.
@kevinsgarage3 жыл бұрын
3D printed parts are now for sale here: ebay.us/NcRjN3
@jeremyricheson60692 жыл бұрын
@@kevinsgarage any way to still get some fins
@analogalien3 жыл бұрын
Fantastic Video. I just subscribed. What model 3d printer do you own?
@kevinsgarage3 жыл бұрын
Thank you! I have a Prusa MK2s.
@analogalien3 жыл бұрын
@@kevinsgarage Thank you Kevin.
@kbuinowski Жыл бұрын
i read that story about the girl that got killed by one of these yard jarts. the story said that the father had a set in the garage. which he was not watching his kids. the story said that the son went into or sneaked into the garage got the yard jarts. him and his friend started to playing around with them in the back yard. while the girl was outside playing in the front of the house.the story has it the boys were under the age. to begin with one of the boys throw the yard jart over the house and it stuck the girl. to me it should be the parents fault for now watching there kids. because i can't remember if the parent knew the kids were playing yard jarts or not. but if the parent knew they were playing with them they should have been put up or locked some where.
@donnaskarzynski723 жыл бұрын
Would love to buy 3 fins from you!!!
@bradlutley86273 жыл бұрын
I would love to buy the plastic pieces as well
@kevinsgarage3 жыл бұрын
The plastic parts will be available to purchase soon
@kevinsgarage3 жыл бұрын
3D printed parts are now for sale here: ebay.us/NcRjN3
@kevinsgarage3 жыл бұрын
@@bradlutley8627 3D printed parts are now for sale here: ebay.us/NcRjN3
@berniefarnung1330 Жыл бұрын
is it legal to buy or sell fins that are of similar size to the fins you printed?
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@hansoncrack2 жыл бұрын
I looked and the ebay link was down :(
@tsmith32472 жыл бұрын
Your ebay link as of 4.13.22 is not working for purchase. Am I doing something wrong? Thanks
@kevinsgarage2 жыл бұрын
eBay removed them since they are associated with banned goods. I am working on getting an alternative secure purchasing method worked out.
@tsmith32472 жыл бұрын
Thank you for the reply Kevin's Garage
@peanut815852 жыл бұрын
@@kevinsgarage Are the files out there somewhere, either for free or for sale, so we could print them ourselves?
@danpolk2 жыл бұрын
@@kevinsgarage just release the files. You're going to get in trouble for profiteering off a banned product.
@PokeRemcards3 жыл бұрын
Can we please get the 3d print files of your modified fins. Id love to give this project a wack.
@kevinsgarage3 жыл бұрын
The plastic parts will be available to purchase soon
@joycecallery76212 жыл бұрын
we are ready to purchase fins, can I get,/purchase file
@michaelwhitman6832 Жыл бұрын
Can I buy components from you?
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@wendyokoopa70483 жыл бұрын
Now we're barely allowed outdoors
@bmlanner2 жыл бұрын
Where are the STL files?
@roystanfill50403 жыл бұрын
If people used common sense no one would get hurt just like horse shoes
@nobodynoone25002 жыл бұрын
I wonder how many people died from horseshoes...
@bluemoonbell02 жыл бұрын
Ah yes arrows that i can throw thd only reward is living at the end of the day
@CCCP_KGB1991 Жыл бұрын
I dont know if its just me, but are the 3d printed fins on ebay working? Like if they are, dislike if they arnt.
@kevinsgarage Жыл бұрын
ebay shut me down :( I am working on getting private orders set up!
@alyssaquartermain44383 жыл бұрын
Do you ship your 3D printed parts to Canada?
@kevinsgarage3 жыл бұрын
Unfortunately only to the US at this time
@Toddcinca3 жыл бұрын
Best thing to do is chuck these things into moving traffic. They luv it
@kevinsgarage3 жыл бұрын
Its one of my favorite hobbies! ;) Legal PS- I don't do that and you shouldn't either
@user-ji2ks9wi2p Жыл бұрын
How can I buy from you?
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@bigbadford812 жыл бұрын
Are the parts available for sale?
@danpolk2 жыл бұрын
He tried to turn it into a business and probably found out how quickly you get in trouble for selling jart anything.
@jeff-dv8cx2 жыл бұрын
fins here: www.thingiverse.com/thing:4936057
@kevinsgarage3 жыл бұрын
3D printed parts are now for sale here: ebay.us/yE32HH
@mikewoolf72143 жыл бұрын
Do these keep getting kicked off eBay? I’d definitely buy em
@kevinsgarage3 жыл бұрын
@@mikewoolf7214 they are just selling out, I cant make them fast enough! They have just been relisted.
@joycecallery76212 жыл бұрын
I tried the link, but this does not work. would love to buy if you have a website with a direct sales link. thanks
@kelseywright6610 Жыл бұрын
@@kevinsgarage Are you willing to share the STL file? Or an updated link to buy.
@kiewiczaaron Жыл бұрын
Don't have a 3D printer. Any chance you'd make the plastic parts for me? I'd compensate of course.
@kevinsgarage10 ай бұрын
Now available! www.etsy.com/listing/1580759861/premium-lawn-dart-replacement-fins
@standavis7266 Жыл бұрын
Can you make me a set?
@user-hz9wo6hr1d Жыл бұрын
Cigarettes have the same warnings and they still sell them BRING BACK JARTS
@johnnyseaview23402 жыл бұрын
Any chance you could contact me kevin from Kevin’s garage?
@davidperry40133 жыл бұрын
I want jarts to be legalized.
@phillipfranklin18912 жыл бұрын
Could I buy a subscription to your “channel” and you send me a set for free. Dallas buyers club. No seriously though
@jonbraddock5545 Жыл бұрын
Calm down. you are not building a machine gun! Good video though.
@K-park813 жыл бұрын
Jeff foxworthy: You can kill a elk with a lawn dart.
@nobodynoone25002 жыл бұрын
No, no you cant. Elk are massive and terrifying. I'd rather fight a bear.
@mikeskidmore67547 ай бұрын
Think of how many Children drowned in swimming pools and die in car accidents.. I can see drunk adults having accidents too .
@lastzombiehunter3 жыл бұрын
Shut up and take my money. How much?
@kevinsgarage3 жыл бұрын
$25 shipped for a set of 4 fins and covers. ebay.us/yE32HH
@lastzombiehunter3 жыл бұрын
@@kevinsgarage I don't see the cone tips for darts.