Lazze Metal Shaping: How to Pre-stretch and Prepare Panels for Welding to Limit Warpage

No video

Lazze Metal Shaping: How to Pre-stretch and Prepare Panels for Welding to Limit Warpage

Рет қаралды 6,007

Күн бұрын

In this video Lazze demonstrates how to prevent warpage by pre-shrinking a panel with the Bead Roller prior to welding.
For more information visit: www.lazzemetal...
Lazze also produces an incredible line of merchandise available for purchase at: artbylazze.shop
Proceeds from merchandise sales will allow Lazze to continue to create free instructional videos and share his extensive knowledge of metal shaping techniques and equipment.

Пікірлер: 22

@trebel 2 ай бұрын

Thank you for all your hard work. Thank you kindly. Good tutorial. Cheers m8.

@seanalexander9531 2 ай бұрын

Thanks Lazze!

@bobfur3290 2 ай бұрын

Great tip. I really look forward to the air cleaner video. You are a true master of your craft.

@user-yc2ho4de6q 2 ай бұрын

Привет смотрю ваши видео 15 лет , сделал себе машину по вашим видео вы мне очень помогли

@fixinstuff9662 2 ай бұрын

Besides my immediate family, you are my favorite Swede. Thank you for the tips. Maybe one day I can have a class with you.

@justanoldman697 2 ай бұрын

would have liked to see after you welded it

@fabtimenow2318 2 ай бұрын

Always love your tips and tricks! Glad to see you back after the move with some new videos 🎉. I've been needing some new inspiration. Thanks for sharing so much with us!

@chriszucker7500 2 ай бұрын

Dagger Tools sells a Lipping Tool...PN: LP1 that is designed to do exactly what you're teaching. I used this tool in a class there and the process worked great. Thanks Lazze for all the great content!

@per-hakanbergkvist8801 2 ай бұрын

Tack Lasse det är alltid intressant med bra tips från dig, jag har börjat förstå de krafter och liv som finns i plåt under olika processer och hur det går att tämja dessa men teori och praktik är två olika saker men skam den som ger sig😂 / mvh Per-Håkan Bergqvist Ragvaldsträsk

@shanemulligan791 2 ай бұрын

thank you Lazze

@Builtbyronny 2 ай бұрын

Keep up with the great work 👍

@kennethstaszak9990 2 ай бұрын

I tried the prestretch using a hammer and dolly andiscovered it to be exactly as you described. When I saw the piece at the end I immediately though custom wheel cover.

@PauliesProjects 2 ай бұрын

Looks like I am going to need a new bead roller. 😂

@RoadsterLoverMedia 2 ай бұрын

thanks

@paulnewton943 2 ай бұрын

Can you weld it and show the full cycle please.

@dennisschickling2249 2 ай бұрын

Thanks. Nice Tip. #STAYSAFE #PHILLYPHILLY 🇺🇸

@orbitup Ай бұрын

So if one panel is on the car do you suggest hammer and dolly to stretch that part of the weld?

@lazzejansson4805 Ай бұрын

Yes, or make a small hand plier with two rollers and roll the edge back and forth

@kieren7763 2 ай бұрын

The main issue i have with pre stretching is the edge goes slightly wonky and you have to file it back the inconstant areas to get the nice fit up again so this should help

@user-lh7ef9kk7r 2 ай бұрын

Like to see how you weld it also people say that Tig weld is better ( softer ) for sheet metal but how is that possible if you use the same filler rod used for mig weld

@jdmjesus6103 2 ай бұрын

Less heat input mostly, minimal to no cleanup too if done right. I've got a video on my channel about how to weld sheet metal that demonstrates what I've learned over the years if you're interested, I'm not trying to take anything away from lazze though, he's better than me. I learned a lot from him.