The best part of this video was fernando smiling and cracking jokes...

They used abs plastic sheets to build the amp mount if anyone is wondering. It’s easy to mold with the application of heat

A video i was waiting for. Simple budget quality upgrade setup. professional install. Nice!👌

wow that is such a clean install. that wiring is art. great job.

Your work always looks flawless!

Had mine for 5 years in 3 different vehicles...and I bought it used. Thing is a beast

You always do a clean install. I wish you are close to where I am.

Always informative and entertaining! Im sure you would cringe at my install, which has changed about 3 times in the last 3 years. need to buy all your tool box items lol

0:50 Fernando goes full walking dead, killing zombies

Hello, I hope you all are doing well at this unfortunate time. I have the same amp and Lc7i and looking to install in my 2018 JLU Jeep with the base system and 7" screen. I want to install the equipment under the passenger seat and am interested in more information on the material you used to mount these products as I am looking to do the same. I'm not a ply wood kind of guy lol and I want to do this as professional as possible. Thank you!

Where would you take signal for a 4 channel amp with tweeters and fronts on 1 channel and rears on another on the jbl system for the lc71?

What type of power wire and fuse you use if you want to install the LC7i alone without amp???

Would this be a good unit to add a 4 channel amp for door speakers and a mono amp for a sub?

Nice vid! Can you do a video comparing the lc7i vs kicker keyloc 200.4? Isn’t using one rca to two rcas on the kicker allow you to connect multiple amps like a 4 ch amp for front/back speakers and a mono amp for subs? What would you recommend?

What’s the advantage of this over just using your “high level signal wires” directly to a amp?

Dean and fernando silly question but what kind of hardware do you use to mount to the plastic? Both in the abs and for the speakers? Nothing in your tool drawer

I have a 2023 Tacoma and will be installing this in auto mode for adding a sub and amp. I currently have an amp running 4 channels for mid and high, can I put this in auto mode and run it that way if no sub is connected?

Hi Dean & Fernando, I have a factory stereo unit working with a dsp alpine pxe 0850x but the subwoofer level is to low . I would like to know if I can use the audio control lc7i to fix the low level subwoofer signal connecting this unit before the dsp. Best regards

Onto the next one

Nice install. Do you guys know of a company that makes a sub harness to go into the stock JBL amp on the 3rd gen Tacoma

Do you need to measure the output voltage of the LC7I before it feeds the amp,so it doesnt exceed the input sensitivity of the amp?

You guys are straight up professional. You obviously take pride in your work and have mastered your craft. I live in Los Angeles, CA. I wish I knew a shop out here that does the exceptional work you guys do.

Did you guys take out the factory amp or did that model truck not have one. I have a few amps on my car that I want to move over to my tundra but I'm still figuring out the install. I would like to keep my factory stereo

Would you ship out a custom amp rack (you design it and I'll install it type thing)?

I was just wondering where you connect the remote out wire on lc7 to your amplifier if you are running gto

Man is there a link where I could ask y’all some questions?

Hello, Should I put LC7i then D5.1300 or directly D5.1300? If so what is the advantages and disadvantages for both method?

Hi, I noticed you’re using 2 speed wires. Do you have to ? I’m running 1 9 conductor wire and all 4 of my speakers won’t play at once. I’ve connected them from the factory radio to the lc6i. Thank you.

Would an lc7i work for a 2016 yukon with the bose stereo system?

Anyone know what harnesses they use to connect to thr head unit!?

Great vid, love watching the channel. How much different would this install be if the Tacoma had the JBL system like mine? Would the lc7i still work or would an iDatalink be a better option with the factory amp?

Can't fault Fernando for bumping some Buble!!!

Would this work on my Harley? LC pro2 just two subs and two 6x9s

how can i add eq to my lc7i i have two amps and epicenter

Dean 2015 camry le wich one it's the remote wire color can't find info no were

@Five Star Car Stereo Dean, because there can be such a drastic difference in tapping the signal from an OEM head unit or amplifier depending on the YEAR and STEREO OPTION of each TACOMA (and other vehicles, of course), it would be REALLY HELPFUL if you could state the Model YEAR and what OEM stereo Option the vehicle has when you are doing these install videos...PLEASE?!?! :-) While the LC7i *might* be the perfect Solution for THIS vehicle, it may not be for other model Years and/or Tacoma's with a different OEM stereo Option. LOVE what you guys do. THANKS!

The mount that you're using for the amps do you sell them? I have a 2020 tacoma and I really need a mount like the one you made. Love your videos👍

Can I install lc7i to 5 channel amp and add epicenter?

Can you make a costume box for a 2020 Toyota tacoma to fit a pair of JL Audio 10TW3 10” Shallow Mount Sub 10TW3-D4

Did you have to use the aqua bass on that head unit?

Anyone know what harnesses are used for the head unit?

How can I put a baby kenwood with the Lc7i?

Thanks for this video! I have a 14 Tundra, I want to keep the stock radio. Will I need both a DSP and something like LC7i? I'll be using either the same focal speakers, or possibly the Kenwood 7" components. No idea yet on amp, and no clue what to do about subs, since my truck is a double cab. Thanks again gentlemen!

still have bass in front speakers and rear speakers without sub

Did you just connect the power and ground of LC7i to the same of the amp in parallel? Without fuse? With no fuse block? Would you please explain the power and ground connection of LC7i. Thank you.

I would love to see how you bent the plastic. In slow motion

I have watched almost all of your videos and i have learned soooo much my car sounds 100000 times better with your suggestions. quick question. are you grabbing power for the LC7I directly from The amp? i may want to do this for my dq-61. when using gto on DQ-61 sometimes i can see it on but i have either no sound or the base remote does not turn on so i have turn the car on and off. any ideas.

I’m about to put a kenwood ddx276bt in and crutchfield says it must be connected to the brake for the DVD player to work. Is that true? Before in my old suv they made it so I could watch dvd while the car is driving. Can you still do that with newer kenwoods?

Hey! Which was fernando’s song? 😆

How much was this install?

So on the LC7i, you can't use channel 3 for full range signal, no jumper setting for that? So you can't run channel 1 for tweeter, channel 2 for mid-range and channel 3 for full-range?

Next time you guys do another LC7i with summing can you guys make a video. Thank you

Hi love ur videos I have a question I know u a busy guy if u or Fernando can answer me a simple question I have a 2015 camry le basic I have a lc6i and Toyota dont have a remote wire I have mine from accessories on radio but have a buzz noise on speakers with radio off and my battery dies if I don't turn car on in 3 days straight but I see the lc6i n lc7i no need to connect straight remote they get signal from rca that's true or from what I'm saying u think I did smt wrong there

Great videos guys as always. Around 16:00 you said you have the wires shielded. Did you mean protected with the loom, or did you actually shield them - like a coaxial cable is shielded??

I was taught on the LC7i if the vehicle only has front and rear with no sub, the 3rd inputs give you the sub signal. thought vehicle does not need full range, the lc7i gives it the range. is this correct?

Does the low frequency signal come through the rear speakers on a Tacoma? I’m thinking of getting one of these. Mine is a 2023.

What brand RCA wires do you use or recommend ? I am doing my own " 911 rescue " on a 1999 2 door 2 wheel drive Chevy Tahoe . The system has good equipment in it , it was just installed by a hack of an installer . The sad part is the guy I bought it from owns the shop that it was abused installation wise . It even has the cuvoted JL stealth center console sub box !

I would like to see an audi s3 on your show

Good

Heyyyyy Fernandoe......😂😂😂

Yes Fernando that is the best hot sauce I love valentina's

I read that you use stinger rcas, did you make them to the length that you want or can you get them in different lengths?

Follow Dean and Franado Car Stereo Clips

Can the lc7 be used in an aftermarket headunit?

I installed an lc7i in my tacoma. I summed both front and rear channels together since the rear speakers have a really weaker signal. I basically have no fader though.

Yo no'mas vine a ver como Fernando come Sabritones con Salsa Valentina.

Can you hook up an lc7i to a monoblock amp?

Valentina’s hot sauce, nice!

Pointy tip 1, wow 🤣

ACR1*