Tutorial on how to go from LCD TV to a TV with led technology explained step by step, in this case we have a 32¨ LCD TV with ccfl lamps KENSTAR S322LD 100-240V 50/60 Hz and a power of 175W and we are going to convert it to led, We are going to start by disassembling the television with a screwdriver and see the electronic cards that make it up and we are going to remove the LCD screen very carefully, to help remove it since it has a lot of glue we are going to use isopropyl alcohol, we are going to use led strips of high brightness of 24v and we are going to replace the ccfl lamps with the led ones, for the connection we are going to place them in parallel soldering with tin and a soldering iron or soldering iron and we are going to be using 9 led strips, to feed the whole set we are going to use the voltage that was needed to feed the inverter or invert and so when we turn on the equipment the backlight also turns on, we will also see how we can do so that the equipment does not protect itself by turning off the equipment for In the absence of the lamps and the inverter, we are going to be manipulating the power supply or power supply here that I am going to leave you a card from a homemade tool to discharge the main electrolytic capacitor and not have risks of electrocution since it can be charged with a quite high voltage if you like the video do not forget to leave your like thanks ..