Thanks, my T7 tester came without a manual and the online PDF I found was unclear in parts. Your video filled in those gaps & is a very good concise tutorial, thank you.

The difference between 3 versions T7 / TC1: Color screen, its functions are the same! T7 is a little faster! The tc screen is a little bigger as they are powered by elem1 batteries. In addition to the configured resistance, indu capacitance, diodes, mos transistors, thyristo, it can also quickly measure additional meter gauges, by infrared code meters (limited in achi format) T7H: It is an upgraded version of T7, upgraded/more version

I've just bought one of these and your video made it very easy to check and learn how to use the unit. Very well explained, thank=you! 👍😄

Дякую. Корисний пристрій. Треба бути придбати.

Thank you for your review

this video was very useful im glad you told us advantage and disadvantage even though im the same as you its not a disadvantage to me

Great. Thanks a lots

Спасибо, прибор пришёл без инструкции))

Anyone know what is the difference between the T7 and the TC1 ?

thank you for this video, it helps a lot

I bought this years ago never calibrated it as it did not come with any of the bits you have but is seems to work fine :)

excellent video . Thank you

thnks for information

I just received the TC-T7-H and the calibration procedure you show causes it to measure the jumper as a resistor. It will not go into calibration mode. Maybe the H model doesn't require calibration? There were no instructions in the box.

I just ordered the new LCR-TC2. I'll try to give an update when I check it out. And later when I actually use it on a mobo.

is it possible to update the firmware ...! thanks for your reply we are interested in buying a pair

Hello! I'm not sure I got it right as for inductance ... you checked a 22mH inductor and the meter showed 0.03mH? If so that's an absurdely high meter error ...

Thanks!

great, my model sadly won't measure inductance

Wish you had hooked up the scope when it was measuring a capacitor - I would like to know the frequency used for the capacitor measurement and cannot find that info anywhere. Also does it use a pure sine wave for capacitance measurement?

Hi Mine is now showing Zender. And the symbol and it doesn't work at all. What is wrong with it? Cheers 🍻

Do you think a heaver test probe gauge would make difference in accuracy?

Just got mine. When testing, pressed yellow button and after "testing" goes away it shows a Capacitor 4.91uf on pins 2 & 3. with no capacitor present....Something wrong here. Also, no instructions whatsoever......

Thx for your Video. Can I make measurements while the device is charged via USB?

Does this tester analyze ICs? A 555, 4017 for example?

How do we know which test port to use for different component? Small cap different than 1000uf cap, Which poet for inductors?

How frequently should it be calibrated?

Can we also test IGBT in this tester? Thank you for the reply...

7:39 datasheet says (Rds): 0.008 Ohm or 8mOhm in this tester you get 100-400mOhm. My question is what tester out there can give a better indication of these values. Thank you i primarily want to check MOSFETS with something more accurate. Will probably still get this one for capacitors though it seems like a nifty checker. Thanks for the video.

ما فأىدة الاختبار الذاتي

❤️❤️❤️

i need firmware fot this.i have erased stock firmware.

Can this lCR metert test components on PCB like capacitors without removing them.

How about capacitor polarity - does it matter how you connect + and - to this device? Cause it obviously matter in circuit but I'm not sure about this device, and the markings do not suggest any way it is just 123...

hello, can this tester check capacitors over 100mf?

I just got the same device. Calibrated and started to test components. Whenever I measure inductor it shows resistor and some unrelated value. Would you please help me how can I fix it?

My T7 stumps the CPU freezes on some semiconductors requiring disassembly to reset by disconnecting the battery. Wonder of the unmarked CPU is a fake.

Is this newer version of TC1?

Подписался и лайкнул в подлержку!👍🌎🌞😊

I have a t7h and can’t get it to go into calibration mode, even got a replacement and same problem

Calibration do not working :(

can this tester check capasitors in circuit ?

preciso esquema t7 obrigado

I bought one of these - LCR T7 - is there a pdf user manual please?

Is this "t7" (it seems T5 and T6 does not exist) wide spreaded as "TC1" ("c" for color).

I cant get mine to self test. It just wont begin the test. Instead gives me resistive values between the sockets. Anyone else have this problem? Edit: it is the T7-H. The reason id like to self test is because it keeps giving me differing results on the same inductors, caps, reaistors.

Why do you choose those 2 mosfet?

8:25 IR

Doesn’t measure gain ?

Oó

МЛТ-РЕЗИСТОРЫ??? НАСЛЕДСТВО ИЗ СССР?

❤❤❤