Leaf Spring Traction bar tuning and adjustments!
Рет қаралды 3,352
5 ай бұрынQuick discussion on leaf spring traction bar adjustments for Drag racing. Bar angles, preload and custom brackets. What’s it all do and when to adjust. If you have any comments of suggestions feel free to throw them in the comments! Thanks for watching!!
@ThomasHimm-ew5ye Ай бұрын
Nikki Bobby sells a bracket calls the Gap bracket goes underneath of the axle it's got four holes in it instead of the one for caltracs I have caltracs and I bought these Gap brackets off of Nikki Bobby and they were great I got four extra holes on the on the on the axle and I still have my normal two up top in the front bracket
@jimmesser5821 5 ай бұрын
Sir good stuff!!!! Made some changes to my car and it's not hitting the tire as hard as it did, lost some 60". I'm running the caltrac setup. May need to look into the Assassin traction bars to get more adjustment for fine tuning rear suspension!
@one_bad_attitude 4 ай бұрын
Thanks for watching. Glad it helped!
@realwill635 2 ай бұрын
do your adjustments work for drag radial also?...or just slicks for no prep
@one_bad_attitude 2 ай бұрын
I think the adjustments to the bars will have the same effect on the tire/leverage no matter what tire
@tjrides2723 3 ай бұрын
Are u running rear sliders as well? Considering if I need them on my set up or not
@one_bad_attitude 3 ай бұрын
Yes I’m running sliders too
@Andrew-ib4wv 5 ай бұрын
What type of leafspring hangers are you using?
@one_bad_attitude 5 ай бұрын
I custom built my front mounts and I’m running sliders in the rear.
Devil's Wheels
Рет қаралды 22 М.
No Prep Garage
Рет қаралды 4,7 М.
4 Link Top Bar Change with Level Lower Bar to stop crushing slicks | Understanding 4 Link suspension
KevinWilsonSBC
Рет қаралды 48 М.
Доступное право. Юристы
Рет қаралды 475 М.
Серёга, Чтоб Вы поняли
Рет қаралды 3,3 МЛН
МАРТИН БОГАТЫРЕВИЧ garage
Рет қаралды 7 МЛН