Learn how I used the cricut print and cut feature with neenah 3g opaque paper

No video

Learn how I used the cricut print and cut feature with neenah 3g opaque paper

Рет қаралды 36,412

4 жыл бұрын

Hey Guys Luis from Lumedia here! In this video you will learn how I used the cricut print and cut feature with neenah 3g opaque paper! This is a very simple feature to use and the results are great! Use this feature to print shirts, koozies, onesies, hats and make it look more professional than just using scissors. If you love what you see hit the like button and subscribe!
Links:
All Products Used in every video:
www.lumedia.ne...
Hp Inkjet:
amzn.to/3irszDS
amzn.to/3wjwKbe
Neenah 3G Opaque For Dark Garments:
amzn.to/2tswsU9
Teflon Sheets:
amzn.to/2YS8tLe
Cricut:
amzn.to/2NAt40P
Shirts:
amzn.to/2sBrODl
Heat Press:
amzn.to/39T59mR
Follow me on Instagram: lumediacreative
www.lumedia.net

Пікірлер: 149

@qb3666 Жыл бұрын

Am here for the beat n dancing. When I say dancing I mean nodding lol

@carlopelser9837 3 жыл бұрын

Just use transfer paper and stick it on the design peel everything off together after the design was cut. Easy as that.

@chalexsaychow5444 2 жыл бұрын

Could you press the transfer paper then peel after pressing?

@monyfashion15 4 жыл бұрын

I use vinyl scraps to transfer complicated images like with a lot of pieces. I peel off the vinyl and just use the clear sticky part then the transfer paper(image ) will stick to it. Then just press it with the heat press and then remove the plastic. I hope it makes senses. It’s just a quick way to transfer difficult images. Something like heat transfer mask.

@Lumedia 4 жыл бұрын

Great idea!! Thanks for the tip 😁

@angelc7140 4 жыл бұрын

you can use the paper that you peel off as a guide to put the design on the shirt.

@Sharkey77 3 жыл бұрын

Yes and just use tailors chalk to make a center line for each piece

@TT.Loopyloop 3 жыл бұрын

There is mask tape just for that

@crystallovesion 4 жыл бұрын

Thank you for always having good music on your channel! sometimes people have such intense music that it's hard to pay attention to learn!

@freedominchrist4045 4 жыл бұрын

To transfer you image you can use the clear cover from your heat vinyl..To pick it up and heat press..

@nolife7781 3 жыл бұрын

when you have the transfer clear part of a HTV project, save that and lay it on these pieces so it will stay together

@sharondasmith7987 4 жыл бұрын

This was awesome thank you so much for your hard work making these videos for us!!!

@Lumedia 4 жыл бұрын

No, you’re awesome!!! Thank you for watching 😁

@rudydrayton2845 4 жыл бұрын

Finnnnnaaaallllly! Thanks man. I've been searching high and low for this specific kind of video to see if I can do multi color designs on my reg printer and get the cricut to cut it out...CLUTCH! SUBSCRIBING NOW!

@Lumedia 4 жыл бұрын

Thank you sir!!!

@Mrruidiaz 4 жыл бұрын

Yeah its mad hard to find I bought a plotter not a cricket but im hoping its somewhat the same

@idadejesus931 4 жыл бұрын

Hi great video it looks great with the white outline

@Lumedia 4 жыл бұрын

Thank you!!

@debrasmith6034 4 жыл бұрын

Hi🙋great video I recently found this and all I can say is Thankyou! You explain things so well I love your Honesty. from Ontario Canada. Have a Blessed Day! Cheers☕

@Lumedia 4 жыл бұрын

I TRY LOL!!! You have no idea how much I cut off because I tend to ramble haha! Thank you so much for watching.

@jannyclough4192 3 жыл бұрын

I watched a lady use Siser Easy Subli Transfer paper to transfer the design to the garment. It worked very well.

@juhlex5016 4 жыл бұрын

What are your material settings on the cricuit cutter for the Neenah paper ? :)

@bevscraftystudio 4 жыл бұрын

I have a question now , what do you do if you have a bigger adult tshirt and they want a bigger image printed and cut ? My situation right now and I only have a regular printer

@reefkeeper_zay2750 3 жыл бұрын

I think there's a way to split the image into 2 images and then the size issues go away.... look into it. Idk how to explain it. Noob here

@Tat2Chris 4 жыл бұрын

Awesome Video!! I'm planning on start my own clothing brand, this helped out a lot.

@Lumedia 4 жыл бұрын

I’m glad!!! Thanks for watching!

@SavenLandry 4 жыл бұрын

Try turning the nena paper on transfer tape to transfer your image over I think it works decent with the spatula or scraper. And the max setting for Cricut print and cut 9.25 x 6.75

@Lumedia 4 жыл бұрын

Good tip!! Any specific type of transfer paper? Does it not burn or melt?? Thank you for all the info!

@SavenLandry 4 жыл бұрын

Lumedia I will have to double check in my shop the name of it but I only lightly press the shirt then apply the print and cut to it and hand peal or role works pretty good

@Lumedia 4 жыл бұрын

I will give it a try and come back with my findings in a later video! Thank you for the advice, I really appreciate it!

@toriwil7260 4 жыл бұрын

I tried this and the color came off on the transfer tape 😫

@Mrruidiaz 4 жыл бұрын

Is there some sort of tutorial im interested

@aliciameza3837 4 жыл бұрын

Hi 👋 love all your videos ! I’ve learned a lot ! I’m really looking forward on the video to bypass the max size for circut print to cut 😫 lol would you be able to make a video on how you do larger prints if there is another way? Thank you so much !!

@jarionallen1484 4 жыл бұрын

Say Bro Thanks for this!!😁 But Hey to clean your mat use any type of Cleaning wipes...I use Lysol wipes...wipe then let Dry☺️✌️

@Lumedia 3 жыл бұрын

good tip. dont know how I just saw this.

@badfamemedia 4 жыл бұрын

thanks for all the info!!

@Lumedia 4 жыл бұрын

Thank you for watching!!

@sunnyseason6543 2 жыл бұрын

HTW sells transfer paper for printable vinyl.

@jeaniceroyal5853 Жыл бұрын

Very nice logo the print looks good. Can I use the 3g Opaque on light colored tshirts?

@ashleyguerra844 2 жыл бұрын

Did you do a video on how to by pass the sizing or the tricks to working around printing and cutting larger images?

@Lumedia 2 жыл бұрын

I didn’t but if I’m correct I believe cricut released an update that fixes that issue.

@rolandajones-golden6137 3 жыл бұрын

Use transfer tape for hotfix rhinestones, it will not melt.

@HECTORJABUNDISJR 2 жыл бұрын

For these situations you can put heat transfer mask on top of the cut out design.

@lambourghiniman 4 жыл бұрын

Love the vids bro 🔥🔥🔥

@Lumedia 4 жыл бұрын

Thank you 🔥🔥🔥

@eileeno4624 3 жыл бұрын

Could you use the transfer sheet from regular htv to transfer maybe? Haven't tried though

@Lumedia 3 жыл бұрын

Yes, i have tried! 😄

@ritagardnerritathemotivato4215 4 жыл бұрын

Awesome job

@Lumedia 4 жыл бұрын

Thank you for watching!!!

@zootasplace7344 2 жыл бұрын

What was the cut you choose on the cricut? Some say glitter iron on..but that just cut right thru the back and was a pain in the ass.

@SharoninKentucky 3 жыл бұрын

Can you use the cricut transfer sheets for infusible ink

@Lumedia 3 жыл бұрын

you can!!!

@justlookinggood7079 3 жыл бұрын

Good video! But you can use clear transfer sheets to keep your design together to transfer onto the t-shirt.

@Lumedia 3 жыл бұрын

Thanks for the tip!

@ThatAnxiousArtist 4 жыл бұрын

so freaking helpful!

@Lumedia 4 жыл бұрын

Thanks for watching 😁

@RichKranium113 2 жыл бұрын

What shirts do you use to transfer. I noticed it didn't say Gildan.

@luzeeq 4 жыл бұрын

Great video. Finally someone that explains it all. Here’s my question and I hope I don’t sound stupid. I am using regular HTV, not the print on kind. Does that work? Also I print on it and its wet. How long do I have to wait for it to dry. You seem to use it right away. 🤷🏽‍♂️ Thanks for your help.

@karenleone9950 3 жыл бұрын

I saw someone use an old piece of HTV transfer paper to transfer the image as one piece to put onto your shirt.

@ernestrodriguezrivera2914 4 жыл бұрын

instead of taking off piece by piece turn the imgine on the opposite direction, than press it with the transfer paper instead of pealing it off.. it gives you the same quality

@dremotionpictures3811 3 жыл бұрын

Hey man can you explain how you can do larger paper? Looking forward to the video. Or if there’s another cynic cutter than you can use without using any complicated tricks.

@Lumedia 3 жыл бұрын

Cricut studio should either already have released or will be releasing full page 8.5x11 update to their print and cut feature!

@janiegarcia2896 3 жыл бұрын

Hi. I'm kind of new but I'm trying to print and cut on a png, but it only scans it does not cut the design not sure what I might be doing wrong. Do you happen to know why it does not want to to cut?

@Lumedia 3 жыл бұрын

At the beginning of uploading the image are you uploading it as a print and cut file?

@babydzcreationz510 3 жыл бұрын

Hey Luis, not sure if this questioned got asked here in the chats. (But too many to skim thru them all) Would you know if you can heat press/iron on dark transfer paper on 100% polyester materials? (Like a grad cap) trying to do something special for my son for his day ! Thank you !!!

@Lumedia 3 жыл бұрын

so sorry i just saw this. but yes you should be able to!

@jenpalubicki3179 3 жыл бұрын

I have a question that I hope u can answer. I accidentally mirrored a picture that I printed out and am wondering if I can still use this even though I mirrored it. Hate to waste the paper but don’t want to go through with it if it’s going to ruin my shirt

@djbigp1 4 жыл бұрын

Awesome video man! How did you get the galaxy to show up like that? Im pretty sure if i tried to print that out i would get mostly black and alot less detail. Maybe you could do a video on printer settings? Also do you use aftermarket inks? Thanks for all your help keep it up! PS i use a wf-7110 printer.

@Lumedia 4 жыл бұрын

You’re using an epson? I use a hp 5200 Series I have links in my description. And no aftermarket inks. Just the hp instant inks! Thank you for watching!! My settings are as follows. Matte premium paper and best quality print.

@bogdanc.4233 Жыл бұрын

@@Lumedia In the description you have another printer... So, can you tell me, please, wich one you used for this video? Thanks!

@Itsmejessica87 3 жыл бұрын

I need HELP! Am I the only one when I do a print and cut image on heat transfer paper and when I use the Cricut to cut it , it still leaves white edges around the image. How can I avoid that from messing up more of my material? Please.

@Lumedia 3 жыл бұрын

There is a setting that allows you to add a bleed. I talk about it in the video! 😁

@Itsmejessica87 3 жыл бұрын

@@Lumedia no I already know that. But even with the bleed on it still doesn’t cut perfectly around certain edges and it still leaves white. And an image for a colored shirt it doesn’t look good. 🤦🏽‍♀️ the struggle is real.

@lokomenduco632 3 жыл бұрын

Hey I made some tshirts with this paper, and after the first wash the colors faded out... What can I do so this dont happen again? I cant start selling t-shirts if this keeps happening. Any tips? Thank you.

@Lumedia 3 жыл бұрын

Use a pigment ink printer Brother! I’m pretty clear on the purposes I use this paper for. While it’s durable it is not permanent!

@lokomenduco632 3 жыл бұрын

@@Lumedia Which printers do you recommend me? Thank you.

@margaretbaez2432 3 жыл бұрын

i heard awesome spray from the dollar tree can fix your cutting mat but i havent tried it yet.

@Jennimortality 4 жыл бұрын

Did you ever try out the light fabric paper?? I ordered some of the dark fabric paper for a white shirt and I’m crossing my fingers it works. I didn’t want to risk the light fabric not working 🤧

@BobbyWize 2 жыл бұрын

Hey can you peel the paper off before the cricut cuts it and then when it cuts it just put it on the shirt? @luhmedia

@jesseibarra6327 4 жыл бұрын

does the ink print on other materials other than garments. does it print on tile? is this comparable to sublimation?

@LovelyByNatureBoutique 4 жыл бұрын

You could try to just lay the border/frame piece that you peeled off as a template. Place the border/frame on the tshirt and just place the pieces inside it. Once you have them all placed on the shirt peel the border/frame off. I guess that’s a temporary fix until you can find a better solution

@Lumedia 4 жыл бұрын

I actually did try that. The material is so light that when I removed the “template” everything moved with it lol. Somebody mentioned to use transfer paper so I will try that in a later video! Thank you for the feedback though!!

@DMitch-uk9mu 4 жыл бұрын

Hey hru so I wanna thank you for tell me about this paper I love now im trying to learn the foil method my question is can I foil my on image or ones I've gotten offline just rand brand names with just my injet printer HP 5052 and Heat press is there a type of paper that dose that if understand what I'm asking you ......

@doxacreationz7070 2 жыл бұрын

Hey Mate what was the blade u use on cricut?

@SiblingRivalryNYC 2 жыл бұрын

They make transfer tape for that brother

@katlynnwitak1450 4 жыл бұрын

Can't you use transfer tape to put it on tha shirt altogether?

@frankym3213 4 жыл бұрын

hey bro need some help, if I buy me a printer like yours, can those prints hold up on 50/50 cotton, polyester? This message applies to the prior video of the world image

@Lumedia 4 жыл бұрын

It should. But I’m about to release a video with a better method. Not with a inkjet printer but with a sublimation one.

@cristalmarin2629 3 жыл бұрын

After you wash the shirt how well does the stamp do ?

@TheRealPrinceCastro 4 жыл бұрын

Weed out what u dont want then apply transfer tape?

@Texaschic79915 4 жыл бұрын

Dude I just got anxiety... but I like your video appreciate it

@Lumedia 4 жыл бұрын

Why you get anxiety man? lol

@Texaschic79915 4 жыл бұрын

Lumedia ...oh it was at the part where you messed up on .. I was eating popcorn too .. you did save the day tho and the result looks great ... good job

@nenazamora2668 4 жыл бұрын

Hi, just recently subscribed, great video, did you have a chance to make a video as to how to use the cricut without the black border?

@Lumedia 4 жыл бұрын

Just design it without the black border and add the bleed.

@nenazamora2668 4 жыл бұрын

@@Lumedia I'm sorry I forgot to say without using the black border in the print and cut for cricut.

@johnmontoya5169 4 жыл бұрын

How do you cut out on the cricut without getting white around the image

@Lumedia 4 жыл бұрын

Add a bleed!

@ayrendelport2737 2 жыл бұрын

Just use your pullback as a template to place the different pieces 🙂

@pauladams810 4 жыл бұрын

Hey what of tht golden shirt ur putting on

@santidope1 4 жыл бұрын

Hey Man my name is Santiago I’m staring a small business. Yours video help a lot but I’m trying to figure out how to print logos with color

@Lumedia 4 жыл бұрын

What do you mean logos with color? And print them on what?

@The87musicdude 3 жыл бұрын

Thanks for the advice awesome video! Would tranfer tape work or would that melt once you press the shirt?

@Lumedia 3 жыл бұрын

I’ve heard you can use low tack transfer paper

@The87musicdude 3 жыл бұрын

@@Lumedia On point with that! I tested it after watching this vid and I had cricut strong grip transfer tape and it started taking off the whole sheet with the backing lol. This business is all about trial and error! Thanks again bro!

@danigemd9662 3 жыл бұрын

@@The87musicdude how would low tack transfer tape pick up the cut vinyl pieces but the regular tack tape not? This is my problem.

@The87musicdude 3 жыл бұрын

@@danigemd9662 the low tack is strong enough to pick up the cut pieces once you vernish them out. Focus on pressing those out more so that the backing comes right off, takes some finessing.

@melindarobinson6597 3 жыл бұрын

Does it need to dry before cutting ?

@Lumedia 3 жыл бұрын

Not so much the Neenah 3g, but if you use easy subli or anything that uses sublimation inks I recommend to let it dry.

@carogg8654 3 жыл бұрын

How did you transfer the letter to the t-shirt?

@badfamemedia 4 жыл бұрын

just got a cameo, maybe you can get a video going about that? thanks

@courtneyrussell8352 4 жыл бұрын

Which setting did you use on the cricut for this a paper ?

@Lumedia 4 жыл бұрын

I believe regular vinyl. I’ll double check.

@courtneyrussell8352 4 жыл бұрын

Lumedia did you find out ?

@colleenabbott9014 3 жыл бұрын

Brilliant thanks so much! Would mirroring the image work? Peel off the top and use the cover paper over the top to press? Thinking out loud here but brainstorming is how we learn hey?

@mattbuddy6803 3 жыл бұрын

What software did u use to make your design/logo?

@Lumedia 3 жыл бұрын

Photoshop

@lifeofjorjorjorden4214 3 жыл бұрын

Use transfer tape

@Lumedia 3 жыл бұрын

haha for sure!

@cameallyj 4 жыл бұрын

Have you found a solution? Maybe a light grip transfer tape?? New subbie🙃

@Lumedia 4 жыл бұрын

I think I did!!! I’ll be updating with a new video!

@notlisteninglinda 4 жыл бұрын

@@Lumedia has that new video dropped yet? Looking forward to learning what tape you went with. Really appreciate your videos man!

@michaelwalker4087 4 жыл бұрын

everytime i go to cut it cuts the image shape but like 1/2 inch away from the actual image so its just a outline of it. also what material setting are you using? and my cricut keeps pushing my mat out when trying to read it

@myalabamahome1125 3 жыл бұрын

You might need to calibrate your machine.

@daknonamezofficialco.4936 4 жыл бұрын

Greetings, What is the best Cricut machine?

@Lumedia 4 жыл бұрын

I actually like my explore air 2. But like my silhouette 4 better.

@migueljr040509 4 жыл бұрын

That's what's up bro

@dnaastyy 3 жыл бұрын

can u send a link of the exact ink u buy please

@joseg93ify 3 жыл бұрын

🔥🔥🔥🔥

@maryrangel1659 3 жыл бұрын

Use transfer paper to get it exactly straight

@The87musicdude 3 жыл бұрын

is this 160 Celsius?

@Lumedia 3 жыл бұрын

Correct!

@carmenguzman4710 3 жыл бұрын

Where do you get your vinyl from?

@thebubbletherapist9979 3 жыл бұрын

Use a transfer tape

@brendaromero3725 3 жыл бұрын

I would of used the paper that you peeled off and put it on top of shirt to put pieces the correct way and once its all set take it off and there you have it...all pieces in their place!!!