Great tutorial Pharraway. You always on point 🤝

Is it just me or is there something very soothing about watching the paint be sprayed on?! I'm like ah, that's better!

I always use a suction feed gun when applying Metalflake to avoid clumping in the pot I put a few ball bearings in the pot and agitate now and then, it gives a better distribution of flake.

I'm 75, when I was about 19 I used Metalflake brand flake, it was real Aluminum flake, these new Mylar flakes are way better, more sparkle, with a Binks #7 gun, .086 tip and needle. All the materials cost about $500.00. In lacquer, RM or Ditzler. "Shit" it was a lot of work. Your doing a great job, keep it going !! Great Video

Goes to show you don’t need a singing and dancing spray booth to do a awesome paint job love your work keep up the good work 👍

I think there was a distinct difference in using the light color sealer . Your first coat of silver popped , and you could already see your reflection 😍

Man that looks so beautiful, I have a thing for metal flake and that just looks so damn cool what a fab job nice one Pharraway you certainly are a metal flake master that’s for sure 👌👍

Man, I've been waiting on this video!! I watched your metal flake tutorial with the file cabinet like 10 times while restoring a bass boat and applied that info to the boat. Came out real nice. Next I'm going to attempt to spray my 350z which needs repainted. Thanks so much for your assistance.

You got integrity redoing all that work. 👍🏼👍🏼

Perfectly done. I like the attention to detail

Looking wonderful, I never got it all off my hose! It really looks amazing. I can't wait for the rest sir.

Super tutorial video came out great. Thanks for sharing your knowledge and tip's there always appreciated 👍🏻

Thank you.

Great video with the best advice from experience.

I wish I would have used plastic on the floor ! Now I gotta pressure wash lol

Very cool Mr. Pharraway can’t wait to see what this looks like out in the sun when it’s finished hopefully the customer likes it this time. Love the look of that matte black gun you were using

Great video..both You and #SprayWayCustoms motivate me to spend money I don't have to buy materials to practice with.. Thanks for the video Bro.

A whole lot of flake, nice. I remember when I use to go with my buddies when they were spraying candies and I'd ask how much flake are you using. They would just say a jar or 2. It would glow. Awesome job brother Thanks

I don't envy you on this redo ! so much time in this kind of job I feel for you my friend, but I know in the end it will be an awesome job and the customer will love it . great work

Damn I’ve never heard that explanation for why silver metal flake is used. Makes sense

loverly job very nice

I'm actually going to be doing a helmet the same way thanks for this video.

very good work Män. very good

Bro that's looking 🔥 right now so much flake can't wait to see the end result, that bucket of flake would have cost a pretty penny

Gracias amigo por compartir tus conocimientos, he aprendido mucho de tí, saludos cordiales desde Veracruz México.

That looks awesome! Very informative as well, thanks!

Thanks!

Badass paintjob and tutorial !!

Nice one Pharaway 👍🏼 I love flake but it makes a mess ! I can't imagine how much worse the mess would be if using a flake buster gun to blow dry flake on a wet bed of clear. Cheers !

Solid dye 👍💅 perfecto :))

Nice Work ! Pharraway

Looking good Pharraway! What a mess LOL. Good video!

Stunning!

That looks amazing 👏 😍

That is awesome...

Just Awesome ..

Great job bro… very nice!!

I will be doing this when i paint my 70 chevy c10 truck candy with the flakes. How many gallons of inter coat clear did you use for the cutlass? Do you think 2 gallons of inter coat clear and 1 gallon of reducer is to much for a truck? I will be using HOK products. Great videos as always. Keep them coming.

Nice work my friend Very Nice. I am very interested in the Metal Flake as I want to use it on a few Guitars I have designed and I am going to build. Thanks for expertese. Are you going to show the process when you Candy it? I like the stuff a lot of you guys do by taping off and etc. My sister boy friend when I was a kid LIke 1972 he had on his brand new Chrysler Charger I think. I was only like 7 or 8 years old but that was a Bad Car, what power. lol

Another great video Pharraway you really make it look so easy laying the metal flakes but I would say you have to be careful to lay nice even coats keeping your overlap consistent to avoid patches or stripes but I've never used it so not sure tbh. Is the intercoat clear just a normal clear solvent basecoat (basecoat binder) Pharraway? and can you add the flake into 2K clearcoat avoiding the need to lay the flake first then clearcoat 🤔🤷‍♂️ great to see you pop in on Tony's live chat last Friday mate 🙏🙏👍 John UK.

That's a crap ton of flake. It's gets everywhere and is a pain to clean up. Great video bud. Thanks for the tips.

Dope Tutorial 🔥🔥🔥🔥🔥

Very cool video. I bought a Gorilla Ladders adjustable height platform (model #GLWP-55A-2) from Home Depot. It's awesome for sanding and spraying roofs, you should check it out. No more moving step ladders around. Looking forward to the candy stage, thanks for the videos.

Perfect! Let's lay some graphics now.

exelent job

Im using .015 and .025 metal flake mixed together on my mazda b2000

Beautiful!!!

nice tutorial but i could never spray in such a tight space i have to have more room lol

Ur hand after the 1 coat of metal flake was hilarious hhaha

Pharraway I’ve been watching this since you started this job. What about the jams and under the hood did you do it already or are you doing it later? Can’t wait for the next video. Keep it up 👍🏽 👍🏽👍🏽

What size is the flakes? What grit you sand the flakes down with? I would like to see you do a mixture of candy,flakes, pearl with just regular clear all together to show people the effects it brings. I did it the first time I ever painted a car and I was amaze of the result and time saving from doing all separately. I did not sand the flakes till after 3 coats of clear and then re-sprayed a final coat of clear...tell me what you think and if this could be a consideration in one of your next videos.

Cool

Did the fans just move the overspray to the next room. You should filter the exhaust.

Awesome job 👌

Another ?? On the inside of the door jams do you do the same process on the inside of the doors??

You're the man 👍

First off your attitude about this redo is way more positive than mine would have been! Second, did you spray 210 clear on it? only reason I ask is I sprayed that clear last week on a project to bury some graphics and I think I may have found my new go to clear. I have sprayed all the majors for a long time and mostly SPI but that 210 from urechem layed out really nice. I have to test it some more on some small projects before I commit to laying it on a complete car but overall I was very pleased.

Thank you for the awesome tutorial.. Can I spray an Orange (like a Dukes of Hazzard) then put gold flake over it??

Yes sir! Bad ass bros!

Bro. Pharraway what were the air pressures set on both your compressor and gun when spraying the flake ? Thank you for your videos. God bless you.✌🏻♥️🙏🏻✝️

Hey, great video, very informative! I wanna ask how do you feel about bigger flakes, like .015? is it worth it? Thanks

Was this .008 flake? Looks nice!

That's some SPARKLE!

Love it bro

How would gold flake be, is it the same as the other colored flake you explained about how it sometimes gets orange peel.

how many coats of metal flake is normally put on it sound like this guy wanted extra asking for a friend lol

Could I apply a metal flake coat with paint and then apply clear coat afterwards?

Do you wet sand after the weeks cure time?

No candy blue on this 1 huh, just going with silver metal flake only ? Looks killer brother ! 👍👌🙏😉

I made the mistake of not covering walls and floor lol had flake everywhere

Could you please tell me what model gun you used and what needle, and where to get one. I seem to remember it was a husky but can't find the other video

Hey boss, you do beautiful work. I hope I'm as good as you one day 💪⚜️I was wondering, what is the name of the gun you used to spray the flake? I noticed it was a silver gun rather than the black EVO. Thank you ahead of time! You are very generous

Amazing man, been following you’re videos for a minute and learnt a lot! How many OZs of flake did you end up using on this? Just curious as I’ll be painting my roof of my rodeo will 1/2 pound of silver flake be good ?

I like mixing .004 .008 and .015 and use either a dry flake gun but I got a Roth flake gun with a 3mm tip and believe it’s to much any suggestions on gun and nozzle size for .015 ?

Great video, when do you remove the plastic covering off the car? Do you have to pass a knife over the edges before peeling it off to avoid tearing the paint as you remove the plastic?

Will a metallic teal base coat work over the metal flake or you have to use candy paint only? I appreciate your videos and appreciate your work you get down bro. Im going to spray my ride with metal flake silver like this video and was going to spray the metallic teal base coat over the metal flake but I have to see if that'll work or not thanks

what happened to using the blue candy?

So if I was spraying a candy color, would I spray the candy before the flake directly on to the Silver or after the metal flake coat? Which is best way?

Could you use black to spray metalflake over to see full coverage better or does the silver metallic base coat work fine,thanks

Why not the candy over the flake, then final clear?

Is it ok to use silver metal flakes over a white metallic base coat?

do you get much static elec... in the room with plastic ??

So the candy comes after the clear??

What psi you use to spray the metal flake and the clear

At what pressure did you spray the metal flakes at?

I have heard you can use inner coat clear. Sand next day.

Buenas tarde. Esta pintando mi camioneta con metal flake cuando aplique todo que. Quite. La sinta. Se vino la pintura. Que. Es lo que ise. Mal.

how much of the inner coat clear was used?

the silver was mixed with intercoat ?

What are your thoughts on using a silver sealer then straight to flake? (Eliminates1 step, the base , extra thickness mills)

The ratio on the intercoat does not help, as long as You dont say how much You mix!

What size masking film I neeed ?

Note to self…Spray metallic flake outside!

What sand do us use..thanks😊

How much you charge to paint a c3 corvette ?

👍🏾 Yo Pharraway my first time shooting flake I shot .008 dipspade blue flake couple weeks ago and used the green Harbor freight gun with a 1.4 tip, it sprayed it out great no clogs or issues. It was just some speaker grilles. Can you explain why you used a 1.9?

From start to finish about how many hours did it take you ?

😍😍😍😍😍

can i get away with no sanding...lets say if i use micro flake? your thoughts on this... you the best!

I wish I would have used plastic on the floor ! Now I gotta pressure wash lol