Hi everyone! Welcome to day 2! Remember you can download the example files from the series at www.TheSketchUpEssentials.com/30Days - let me know if you have any questions about anything in the comments below! :)

I'll never unsubscribe to this channel and I haven't used sketchup in years. I owe you a lot more than a sub. The unsung hero of my architecture degree.

Excellent series, thanks for sharing your knowledge! By FAR the most difficult and frustrating part is figuring out the correct sequence of key strokes and clicks to start and stop lines and close off shapes. I spent a good 20 minutes trying to find the midpoint /offset and baseline of the triangle shape! It would be great if you could explain a little slower those sequences, as without seeing if you are pressing return or clicking the mouse saying "like that" is not so obvious! Thanks again! Just to add that not know how to start/end line properly means I have many lines drawn on top of one another, and although they are unseen they seems to have created many different mid-points. Very frustrating to try to erase those incorrect lines as you can see them or separate them from the correct line which was initially drawn, if that makes sense?!

I actually didn't know about the double click withe push tool. That's really useful.

Great teaching approach. Easy to understand and follow along. Keep up the good work! All the very best!

I appreciate you, sir. You are a committed educator. Though I discovered you much later, I like the way you lead.😍😍😍

Having fun doing this serie! Well done! You are a talented teacher.

👍Great timing and very well done. I'm in for 30. Much appreciated!

Justin I have been using Sketchup since 2015 and did not know I could right-click on an arc and get the center!

This is a well done series, and helpful for people who are not just beginners

Thank you for amazing tutorials! I hope one day sketchup is going to be my job ❤

I'm new to sketchup and I'm learning so much! I can't afford paid lessons so Thank You!

Good luck with exceeding SU's subscriber count, mate. I've been sharing the channel around.

I have started the tutorial today. Very easy methods. Thanks

Great video I've learnt so much it took me an hour to draw this great job again

Thank you so much for these videos I have a question about the arc tool, since it doesn't seem to work when I write a large number, I have tried up to 100 and did not receive a response... I appreciate your help.

Love your videos , I'm coming back to re-visit your videos , so insightful, your brazilian fan

I've seen that has actually explained it to in a concise way!

dude you are a hero, thank you

Lesson 2 complete. Sometimes you move quickly from end points to mid points and I can't catch it but overall a good video. I learned a lot in lesson one as well.

Thank you for explaining this thoroughly!

This is really smartly presented teaching - well done. Sub'd and onto lesson 3.

2nd Day, Let's Goooooooooooooooooooo.

Hello Justin. Thank you so much for the tutorials. I am having a hard time with the measurements. Pretty much from the get go my file wants to use larger measuring units. 1" is too tiny to show up. I tried zooming in and all but it still didnʻt like the sizes. Anything in the overall settings I need to adjust? NEVERMIND, I had deleted the person and had lost reference....I had not zoomed in ENOUGH. I am leaving this comment here in case somebody else is having issues with it. Obviously I am a complete beginner. YAY. A bit over 4hrs for Day1 video and ʻonlyʻ 2hrs today for Day2. Thank you for talking it all through so thoroughly.

I've been using sketchup since 2014. I might learn some things deeper in this series.

Hey, i want to ask, what is cad fitting?

Cool. Getting there...cheers

Thank you so much 👏🥰

Great lesson.

Greeting sir Justin thank you so much 😍

Online (free) version of sketchup does not have the long click menus on the toolbar. Is there somewhere to add that setting?

Enhorabuena por estos video tutoriales. Lo que estaría muy bien es que pusiese en el dibujo inicial las medidas en sistema métrico para poder seguir los ejercicios con facilidad. Gracias de antemano.

When drawing edge lines, why are the lines invisible and end points invisible? It makes it quite difficult to find the original midpoint again to make additional measurements off of the original midpoint. Is there a way to show all end points of edge lines?

Could you please make a chain for Urban designer and town planners ?

Newbie to Sketchup. In the Day 1 and Day 2 videos, I noticed you start at the origin and align along the vertices. Is this the usually best position to start a modeling project?

im having an issue loading the stl file to cura slicer. my main purpose for learning this is to work with 3d printing, the table turned out fine. day 2's lesson, the rounded hoop part on the right side, doesnt show up in the preview when i attempt to print the model. was wondering what i did wrong? instead its trying to print the hole, instead of the hoop part... i have the whole model as a group so it should all register as one piece. any ideas?

Thank You!

i cant get on the inclined object when i make it it doesn't become a solid object instead they are a separate object pls tell me how it does

Which default template do you start out with?

how come that my inclined object does not turn into a single solid object?

Did I miss where you say to group ?????? trying to add stuff and I cant now.

I am drawing the two parallel triangular faces but they don't create a solid 8:27. Help

Any idea how to put centre in SketchUp pro 2018 ..

awesome vids, ill let you know if it worked on vid #30

older version don't have find centre option

2 done, 28 to go!

😊😊😊

good jop

👍👍👍👍

✌️❤️

I hate this channel, new to sketchup (stupid me, knew for it but was too lazy) and there is too many videos on this channel so I will never catch up new ones.

thk