Learn Solidworks In 5 More Minutes! | Solidworks Tutorial Part 2

Рет қаралды 117,758

Күн бұрын

This is a followup to our popular Learn Solidworks in Five minutes video. In this episode you will learn to use dimensions and relations in your Solidworks sketches and models. Actually, these Solidworks tutorials run a little longer than five minutes most of the time but we try to squeeze in lots of good information without putting you to sleep.
Part One: • Learn Solidworks in 5 ...
Part Two: • Learn Solidworks In 5 ...
Part Three: • Learn Solidworks in 5 ...
Part Four: • Learn Solidworks In Fi...
Part Five: • Learn Solidworks In Fi...
Part Six: • Learn Solidworks In Fi...
Part Seven: • Learn Solidworks In Fi...
Be sure to check out some of our cool inventions here:
www.soundlazer.com
www.soniclevitation.com
www.richardhaberkern.com
#solidworks
#learnsolidworks
#learnsolidworksin5minutes
#inventiontherapy
#autocad
#inventor
#cad
#cadcam
#CNC
---
/ inventiontherapy
www.soundlazer.com/shop/
www.soundlazer.com/eurorack/
www.richardhaberkern.com
www.inventiontherapy.com

Пікірлер: 78

@AnonYmous-cf2ci 6 жыл бұрын

I'm enjoying these tutorials. I've been taking tutorials from a few different channels. I definitely appreciate having different designers offering up these quick tutorials that simply show us concepts, and then turn us loose to be creative with our new skills. Definitely looking forward to more tutorials from you!

@z.martinez1986 5 жыл бұрын

Thank you for posting your videos! I'm trying to learn on my own before my yearly review at work. Getting this knowledge can open up so many doors!

@barrynevio4440 4 жыл бұрын

Your videos are straight to the point and easy to follow. I use them as a guide for every part I make.

@yemaneberhane6393 4 жыл бұрын

You are unbeliveable fantastic clean brainy help. God bless you from my heart. I am satisfied the first time with you. And continue we will ollow you sir.

@Shamblade 4 жыл бұрын

You are really helping me brush these skills up in quarantine ready to impress my teacher when I get back to school. Thanks!

@leegibbins8284 4 жыл бұрын

Spot on buddy, nice and clear, simple and no messing around blundering!

@kentvandervelden 6 жыл бұрын

Hi Richard, wonderful start to the series, looking forward to the next one. Videos are so much faster to learn from than the SolidWorks books or forums. The other day I was trying to figure out to create a belt mate, struggling with the forum suggestions, but after one quick video, I was done.

@InventionTherapy 6 жыл бұрын

More videos to come.

@marvenscharles7469 6 жыл бұрын

Again... Thank You very much!

@adrianagiordana7716 4 жыл бұрын

Your tutorials are perfect. Thanks for your work!

@salviskrilovs 4 жыл бұрын

I am new to All This. Your video is easy to understand and I hope I will learn a lot of you. Thanks.

@iceblaster071 5 жыл бұрын

thanks for the free tutorials!

@json2708 6 жыл бұрын

now im interested in solidworks...thank you

@sohaibaljarih4008 4 жыл бұрын

Smart, easy, awesome... thank you ☺

@minhxtran9618 6 жыл бұрын

step by step, easy to learn, it work good!

@pistnbroke9236 4 жыл бұрын

Hands down the best tutorials on KZfaq

@xhaxhimiti 5 жыл бұрын

Great work. Thank you.

@lucabeavis 3 жыл бұрын

Best tutorials and teacher on the internet!

@stavlee1 5 жыл бұрын

Your tutorials are extremely helpful. Please keep up the good work and upload some more. Thanks.

@InventionTherapy 5 жыл бұрын

Are you guys not being notified? I just did an hour live class that ended five minutes ago. kzfaq.info/get/bejne/mr6WjbCrnr-ydp8.html

@adamreese7238 5 жыл бұрын

Great this is really what I needed keep it on thanks.

@SharonCapehart 6 жыл бұрын

What a great tutorial, thanks!

@InventionTherapy 6 жыл бұрын

Thank you Sharon

@yhyaayman6298 6 жыл бұрын

Nice video and very helpful. I am wating to the next video in this series 😀🖒

@3498137 Жыл бұрын

Excelent Tutorials!! Thank very much for your support!!!

@gamergirl8985 5 жыл бұрын

Super helpful! My woodshop teacher asked me to learn this program so we can use it on my school’s larger CNC and asked me to teach my class how to use the program, these videos are really helping me learn it!

@SupraSmart68 4 жыл бұрын

@ Gamergirl89, isn't that called child labour or exploitation? Shouldn't he at least be paying you some of his wages for doing his job? Next he'll be wanting sexual favours! (Trust me ;-). "Good morning class. It's lovely to see you all here again. Especially (insert your real name here unless you have really weird parents!)". A little while later once everyone else is busy pretend sword fighting each other with blunt chisels and screwdrivers and seeing how tightly they can G clamp their nipples, "I say, that's a very nice deep plunge blouse you have on young lady. Be careful you don't get any shavings down there or I'll have to put my hands in and scoop them out for you! Speaking of shavings, look at all that dust down the back of the CNC bed. Be a darling and bend over and sweep them out for me?" Oh, sorry, your teacher is female!! In that case.... wow, it's getting hot in here.... I need to open a window! OMG, you're actually male pretending to be female as a research project! In that case.... you have bigger issues than I do!

@gamergirl8985 4 жыл бұрын

SupraSmart68 what?? Dude, it was part of the curriculum. I was the only one in the class with any sort of computer know-how plus this was a year ago, chill out. And please don’t make those weird comments. (I’m a minor)

@GAGALOVER1976 4 жыл бұрын

SupraSmart68 You are not “supra smart”...you are a SUPER CREEP. Do you always tell stories of your sexual fantasies to underaged teenagers? Bc you just did. Just...gross. Consider yourself reported you disgusting excuse for a human being, and get a life.

@maysammirzakhalili4862 5 жыл бұрын

Thank you very much .

@n.sakina5856 6 жыл бұрын

Thanks !

@ueasy1 6 жыл бұрын

Good video, thank you

@victorm6764 5 жыл бұрын

That was helpful I learn a new trick.

@fernandovanegas1273 5 жыл бұрын

Thank you so much for your tutorials

@InventionTherapy 5 жыл бұрын

More to come

@Weitle09 5 жыл бұрын

Very good tutorials. I've always been a little hesitant about software such as this, and you are helping to make it easier. Kudos!

@edwardshanks9425 4 жыл бұрын

30 year mold designer here. Looking at different softwares to evaluate. Got any mold design tutorials? The 2 Iv'e seen so far were very informative. Thank you!

@maysammirzakhalili4862 5 жыл бұрын

Thank you

@z.martinez1986 5 жыл бұрын

Thank you really helps me out

@InventionTherapy 5 жыл бұрын

Glad you liked it.

@Chahdraa 3 жыл бұрын

THANK YOU

@aleugonzalez9982 5 жыл бұрын

Great tutorials thanks!

@InventionTherapy 5 жыл бұрын

You are welcome

@romanssemjonovs4473 5 жыл бұрын

Very useful!!!!!!!

@InventionTherapy 5 жыл бұрын

Thank you. I try.

@mariachizhova1980 5 жыл бұрын

i love solid works

@hananehome2108 5 жыл бұрын

you are awesome

@lookyloo777 6 жыл бұрын

great tutorials !, im just wondering, would student solid works or an older less expensive SW software do the same thing or are you using the latest and greatest of SW 2018 ? again Thank you and keep making this great videos please

@InventionTherapy 6 жыл бұрын

All versions from SW 2011 on are basically the same.

@GrndKmstr 3 жыл бұрын

Once i have made a drawing with the 3 holes how do i make it bigger not in scale, so same scale but now I want a part like that, but say 12 feet long with holes in exact same scale still apart and in size?

@mlee9049 5 жыл бұрын

Thank you for the helpful video. I'm new to SolidWorks and trying to figure out the best way to efficiently learn the software. Besides watching online videos, what do you recommend? I'm thinking about becoming certified...What first step would you recommend? Your guidance is greatly appreciated.

@InventionTherapy 5 жыл бұрын

The way I learned was to find a real project to do. Something simple to moderate that you can design. Having a project to do forces you to learn on your own. Personally, I pick the most difficult challenges and break them down to simpler tasks but it depends on how you like to learn.

@mlee9049 5 жыл бұрын

@@InventionTherapy Thank for your advice. I do have a project in mind that I can start with. Is there a third party company (online) that you like to use, for machining your parts?

@InventionTherapy 5 жыл бұрын

I have used a few companies in California and China. Here is one I currently use: queentaprecision.com

@stringfellowhawk4843 6 жыл бұрын

Oh man... at 6:30 you have to keep going back to the rotate button to move the part around before you select each corner for the fillet? I wonder why they do it like that. Seems like Rhinoceros is a little more efficient at most things. Either way, totally wanna learn SW.

@InventionTherapy 6 жыл бұрын

Did you just compare Rino to Solidworks? That's like comparing Ferrari to Kia.

@sohailnadeem4409 5 жыл бұрын

My offset entries was greyed out when doing the loop, sw 18

@sabini999 5 жыл бұрын

First select the top face and click "sketch"

@tomasurrabazo2589 5 жыл бұрын

can someone send me the link to the finished objective please and thank you i’m just trying to pass my engineering class

@InventionTherapy 5 жыл бұрын

Erased it a long time ago. Follow the video and you can make it yourself in a few minutes.

@3ric585 5 жыл бұрын

Can you do: "How to use AutoCAD on a Chromebook" ? It's hard to use without all the PC sub menus

@InventionTherapy 5 жыл бұрын

I use a MAC with Windows.

@iceblaster071 5 жыл бұрын

you can try onshape

@InventionTherapy 5 жыл бұрын

Onshape is the older, online version o Fusion 360, no? Not really a good choice for an inventor at this point. We prefer Fusion 360, Autocad Inventor or Solidworks.

@questforknowledge750 5 жыл бұрын

What’s the cheapest way to get this program?

@InventionTherapy 5 жыл бұрын

Solidworks is not exactly cheap in any version: www.solidworks.com/sw/purchase/solidworks-trial.htm

@aryanmishra5591 5 жыл бұрын

The cheapest way to get this program would be to participate in some competition like SAE Baja and asking for sponsorship form Dassault system. And the other way is very well known and I don't really need to tell you.😎

@PurityVendetta 3 жыл бұрын

I'm a self taught engineer running and working in my own machine shop. I'd like to move into CAD/CAM to take my business forward but so far I can't afford to just buy something like SOLIDWORKS on the off chance that I might be able to use it in real life. Unfory the UK's vocational education system is broken. Is there any way that I can get to practice on the software without having to pay £2000 to lean the basics?

@footballremix.8084 3 жыл бұрын

How did you become a self taught engineer I want to be one

@ambrosio46 6 жыл бұрын

Sometimes one loses track of the white mouse cursor/pointer in the white background. Could you add a yellow shadow, circle, around the mouse cursor/pointer? kzfaq.info/get/bejne/f7V4dbtjmNmxiqs.html