Thanks for sharing this refrigeration information, along with your electrical information as well! 🙂

Very Nicely explained. I am excited to see your next video on Provision refrigeration troubles. Thanks

Your videos are the most simplified and well explained. Keep posting such. It has been a great practical knowledge booster for many of the youngsters like us😊👍🏻

Informative and on point- thanks for putting this together!

As always excellent and informative video keep them coming. This is a common problem I’ve encountered this many times but the Chief just had me use hot water to break up the ice 🧊

Very good video and explained. I am excited to see your next video on Provision refrigeration troubles. Thanks

thank you for making very informative video -as you mentioned at the end waiting video regarding other problems facing on refrigeration ,keep doing very good work lecky

Thanks leaky Jake hope can hear more knowledge from you

Napaka systematic mo talaga sir pag apporach sa problem. Thumbs up!

Thank you Jake... expecting more videos related to refrigeration and air condition....Thank you...😊

Your video cover much more than what institutes teach us. Awesome video 👌🏻

Sir salamat Po sa mga idea ng mga troubleshooting.. ❤️Keep safe all

Salamat Po!Keep in mind my friend that as ship's ETO to deal with refrigerators and A/C IS NOT YOUR OBLIGATION OR JOB!!!Where is your engineers?Scratching the ases in ECR perhaps?Let them do their job where a refrigeration systems is one of their duties!

Good share from kabayan base on his experience faced on board ship recently as it also can advance to someone else knowledge about fridge system...😊

Godbless po!,please keep posting such knowledge and ideas👍👍👍

Thank you for the knowledge. Keep it up!

Thanks a lot for sharing your thoughts

Thank you sir lecky for another knowledgeable ideas.

Thankyou sir very informative .. seaferer din ako passenger vessel mag isa lang din po ako na reefer dito ... upload ka din sir sa trouble ng chiller compressor

Very informative sir thank you for sharing your expertise ingat lagi SA paglalayag God bless

Nice very informative video. Just piece of advice much better and safer to use water in defrosting expansion valve.

very informative Elec. thank you

I am studying for eto now... Urs video r very useful to me.. Thank u

Good job sir jake kaya pala nag ice build up yung evaporator ng chiller dahil d wastong pagset yung TXV..lage po ako nanonood sa vlog nyu sir.sana palarin gaya nyu po.

Thanks for your video sir. It's very helpfull 🙏.

This is the best Refrigeration field for a job. Excellent trouble shooting. 9/30/2022yr

Excellent!

Great job✅

Thank you so much sir, stay safe always!!!!

What a cool job! Sailing the beautiful seas and keeping the vessel's systems in ship-shape!

Excellent,,

Very Nice . Thank you.

Thanks for the video!!!

Nice bro, thank u for the knowledge

Thank you so much for your information

Thanks very much.

Very good vedio ..after watching yr vedio thing came in my mind Is let me first subscribe then go for next😂

Super valuable Sir . Same problem in my meat room . I will try this method

Hi,, thanks for the vedio which is very usefull.. Lecky,, I have a same trouble which is Ice deposit on expansion valve. I have cleaned inside filter and run the system. But trouble is remaining still. Unfortunately , I dont have a spare one onboard ...😒

Keep posting sir tnx

Sir please keep on update more knowledge eto videos

thank to your sharing kabayan God keep bless you

Nice video sir thanks

Thanks for this video sir more power to you,anyway sir where you can bought your tool permanent magnet it is so nice?

Super thank you sir

Sir you are my favorite one ❤️ Lots of love 💕 Keep making knowledgeable videos and share your experience 🙏🏻

A Lot of tHanks for the vídeo

I'll love to be side by side with you while you do the troubleshooting,,, I'll be asking 2 million questions 😂😂

Nice video lecky 👍🏻

Dear Jake, Icing on evaporator ,so you reduced the super heat by turning it into counter clock wise. Actually here, superheat was "increased". I believe it's done after turning the adjustment screw to "clock wise ."

Salamat lecky

Thank you sir

Slmat sir lecky jake

👏👏

Thankyou sir...very helpful ❤️

Nice videos, which ships are you sailing on ?

Thank You po Sir Leckyjake👍🙏☺️

Kindly it would be nice to elaborate on superheat thing. First of all if the system was running fine before this problem happened and there was no work done on the TXV of veg room . So why to solve the problem we have to open the TXV more . As we know it has been set by factory before it was fitted as per requirement of the system. That clearly says that TXV should automatically open more as per the operational requirement. That means opening pressure due to the bulb sensing is not sufficient to maintain the superheat. Though the action solved the problem but I feel if TXV is malfunctioning then it needs to be changed so that it maintains the temperature in the previous setting of the TXV.

Sir good job Sana mag labas ka din ng video kung paano ang adjustment ng txv sa ice machine tnx sir

After wait is end 🥰🥰🥰

Salamat sa idea master

Our Blaster Freezer room (-40C) frequently have icing on the floor (we have proper door with gasket and curtain strips but hot air from outside or products when we push the hot product into the room to freeze them). Our floor has changed to use PU to reduce icing and anti-slip yet still have this issue... do you have any suggestions?

Good one sir. Sir how did u adjusting the manual txv value did there is any specific adjustment value is there ah sir

Sir sana next video Po charging of refrigerant..at ano procedure safety ways

I liked the video.,yes there is a great responsibility to keep the system going,out at sea.Water is the superheat U maintain on this cooler? In future show us the superheat setting

Excellent Trouble shooting a superheat adjust ment needed. 10/30 2021

Tnx for sharing,,,,

👍

👌🏾👌🏾❤️

Hi Elect, thank you for the video, just curious if the vegetable room have evaporator pressure regulator since the piping is interconnected with meat and fish freezer? Means both suction pressure are the same. Provision compressors on this video is Bitzer / Sabroe open type.

how about back pressure control valve on the evaporator out let? does it function correctly? need adjustment. i guess.

nice galing

Thank you. What will be the problem if i get ice only on expansion valve but not on Evaporator.

Hi thx u for the content , I got confused when u lower the super heat the ice will be melted? Isn't increasing the heat will melt the ice

Nakasubscribe na bro...

After long time sir

Thank you for this video. I still have a question, how do you know the level of the refrigerent is okay? And how do you assess the evaporators on your meat and fish room are still good?

Hi! Lecky Jake good day to you. Elect I have a question maybe you can help me. My question is, what is the common caused or the problem of the Cylinder head and the line in Marine Refrigeration Icing?

How we know we increased or decreased superheat by turning the screw.is there any marking for clock wise and anticlock wise for increased or decreased the superheat

Sir good day , what pressure of refregirant for low and high pressure can you say that your refrigerant is enough ??thankyou

I talk about you new generation eto officers to watch your videos :)

Sir where can you buy that magnetic solinoid tester?

Good day sir lecky may tanung po ako tungkol sa MGPS nmin dito, kasi may voltahi nman papuntang cells nya ang problima walang current reading sa or no current indicaes at ammeter. Thank you sir lecky isa narin po akng electrician sa barko dito sa cebu interisland lang muna sir.

Sir please make one Vidio about how to test generator alarm for the serveay require

Wait for this video

Hello leckay goo day! may tanong lang po ako sa reefer provision namin ang MEAT ROOM hindi mag auto start...pero mag auto stop naman? Pls. share your a good idea..

Okay I love you videos but you do know you should mention to people if you take off a solenoid coil when it's energized that you going to end up burning up the coil

by freezing, possibility, thermostat, coolant, or some leak in ducts etc.

wher which turn direction in that case sir...the ice build up problem,,,1 full turn left or right?

I m on board as a trainee, keep waits ur video on board too

Defrosting procedure using water is not an excellent way of doing it. This is the old way done by old marine engineer but you have done a good job.

Is there any filter near the exp valve

Sir good day po ano po cause of trouble at pwede gagawin sa Accomodation aircon po namin laging nag yeyelow ang evaporator side kaya mag trip ang aircon. Ang suction side pressure nya po normally nasa 0.4 to 0.5bars peru pag nag yellow na sya umabot nalang nang 0.10 to 0.12 tsaka mag trip.

⭐⭐⭐

I can see there is always lot of ice formation on the door sometime it is very impossible to open what could be the reason pls reply

Sir tanong lang po pag nag yeyelo ba ang adjust ba natin ay counter clockwise o clockwise thanks po

in bitzer semi hermetic compressore,when we start it then temperature down -25°C.after then temperature reached -7°C and after again not reached to -25°C.so what can i do to solve this problem??

If thermoking sb210 does can I do same thing and it my help

Sir what is hardest part of being a seafarer?

Very good job 👍