🎥 Switchback DRLs for most cars: kzfaq.info/get/bejne/gtCmq7aJ3uDFfaM.html
@Lamster663 жыл бұрын
Thats a nice black bumper you have on there glad to see you got it fixed!
@CycloneCyd3 жыл бұрын
Luckily it doesn't look too bad with a black bumper. Last week I picked up an 08 Aero bumper in Ice blue, but it needs some work before I fit it.
@kewlbean3 жыл бұрын
Great videos! These have been very helpful with my 2006 Aero. Thanks for posting all of them.
@CycloneCyd3 жыл бұрын
Thank you for watching and commenting, Benjamin 👍
@davereeve73242 жыл бұрын
Your vids are straight up gold. Just wish I could find the direnza intercooler for my tid lol
@CycloneCyd2 жыл бұрын
I think the pandemic has hit supply capabilities
@davereeve73242 жыл бұрын
@@CycloneCyd 100% bud. Just straight piped the saab. Intercooler next. They have a direct fit on ebay made by gravity but I'm not sure on the build quality
@bobbyse263 жыл бұрын
Nice, mind you I haven’t converted the ones the front ones yet, they are still in the box. I’ll get round to it when I’m feeling brave.
@CycloneCyd3 жыл бұрын
Thanks. I just need to reverse off the drive in the dark now to test them out, but they seem quite decent
@MrOikono3 жыл бұрын
Great vid as always
@CycloneCyd3 жыл бұрын
Appreciate it!
@canadiansaabfreak65303 жыл бұрын
WOW! the video quality on this one is really clear! What camera? Oh and good informational video as always lol
@CycloneCyd3 жыл бұрын
About my last 30 videos have been recorded on my Galaxy S7 Edge with Filmic Pro in 4k. You can see the other gear I use here bit.ly/CC_Gear. The sun was out for this one and I used an LED worklight for fill-in.
@canadiansaabfreak65303 жыл бұрын
@@CycloneCyd Thanks for the info!
@yotambien26643 жыл бұрын
Thanks for sharing 👏👏👏
@CycloneCyd3 жыл бұрын
Thank you for watching. Welcome aboard
@matts21793 жыл бұрын
Hi Cyd, thanks for this video! What reverse LEDs did you use? (Just to be clear, I’m talking about the bulbs that occupy the reverse light location on the bulb holder)
@macdapimp832 жыл бұрын
I was just thinking the same thing bud, I'd like to do a set of custom rear lights for the same car but a September 2003 convertible
@lorddiablo85753 жыл бұрын
I think you did something to both of your rear lights .... paint the borders with black and made them like the ice-box version, did you ??
@CycloneCyd3 жыл бұрын
Yes and no❗ YES, I added a black border a la 'ice blocks', but No it's not paint, it's vinyl wrap. I actually don't like the ice blocks because you can see the red and yellow bulbs through the clear lens and also I hate that horrible red reflector on the side that they put there for the US market legislation. They should have put a red marker in the bumper just for US cars IMO.
@lorddiablo85753 жыл бұрын
@@CycloneCyd Well, I wanna make it the way you did, but finally I didn't as I saw somebody did the same as yours by paint ( not vinyl wrap ) but I don't like it, so I just leave it as is !
@tombell6443 Жыл бұрын
I see you have also changed your normal reverse lights to leds, they look good, where did you get them from ? I have done the indicator bulb change (as per video), but now (of course) the original reverse light looks yellow compared to the new reverse/indicator one. Thanks
@tedkurmaku48447 ай бұрын
Hi Cyd, could you please share a link for the reverse LEDs only? Thanks a lot in advance.
@jetguy12053 жыл бұрын
The aliexpress links can't be viewed in the USA because it says they can't be shipped to usa. Could you post a screenshot of the one you used or a link to another?
@elsapomasguapo3 жыл бұрын
^^^^ Having the same issue
@achishukuteki9413 жыл бұрын
Great work. However, do you have a part number for the pushpin clips for the trunk/boot lining? Mine were old and brittle.
@CycloneCyd3 жыл бұрын
Oh, those clips really are cheap shit. Use these instead: bit.ly/Trim_Clips_8mm, they are so much better.
@normanbarclay8578 Жыл бұрын
Shame about this video. I followed the one about autodim rear veiw mirror, it was fantastic. This one jumps about too quickly and has strange noises it the editing. I wanted to change my lights as in the video but will have to look else where for info. Disappointed. Your usually very good. Never mind everyone can have a bad day. Regards Norrie.
@CycloneCyd Жыл бұрын
I have to say, I couldn't see the problem. You sure your internet connection was okay?
@yordan1953 жыл бұрын
Thank you for the knowledge that you give to 93 and Vectra c owners. Do you think that, with the relay scheme you made, Will it work on h7 for high beam and for rear position and brake and blinker? Thank you
@jetguy12053 жыл бұрын
have you found red led bulbs to replace the tail and brake lights that work this easily?
@CycloneCyd3 жыл бұрын
Oh, gosh I wish❗ No, but I have got a scheme for setting up red LEDs for the tail & brake lights. I want to try it out and make sure it works okay before recommending it to viewers. Once I've got 'proof of concept' there'll be a video 👍
@CycloneCyd3 жыл бұрын
Bear with me on that link issue while I find something for you
@derekofalltrades2 жыл бұрын
Did you have a chance to find an led that works in the ice block lights for the running light/stop light
@aladdinscavekeperra3057 Жыл бұрын
Hi Cyd, where do you get the dual output LED's? Cheers Ross.
@CycloneCyd Жыл бұрын
s.click.aliexpress.com/e/_DdZ7dGT
@rmt58206 ай бұрын
Hello Sir is ur bulb is 1156 or 1156-150'?
@ShadowCode3 жыл бұрын
Wow, this is great. Been wondering about LED turn signals for a while. Can these same bulbs be applied to the front turn signals?
@CycloneCyd3 жыл бұрын
Yes, absolutely. See here: kzfaq.info/get/bejne/gtCmq7aJ3uDFfaM.html
@ShadowCode3 жыл бұрын
@@CycloneCyd cheers mate, do you also have a link for the LED reverse lights you used? Or are they still originals?
@bobbyse263 жыл бұрын
Hi Paul, would it be 1 on multi-plug for the convertible too? And do you Connect up the extra wire to spade connector from the second bulb. I successfully, finally fitted the switch back details today, as per your video. They look great. Is there a solution to the parking light, as it seems now, quite yellow in comparison? Keep up the sterling work, most appreciated xx
@skooistra17663 жыл бұрын
looks awesome but the link to where you bought them doesn't work anymore sadly
@CycloneCyd3 жыл бұрын
worked for me no problem: bit.ly/Switchback_DRL_t1 I'll try again from another laptop later
@skooistra17663 жыл бұрын
@@CycloneCyd that one worked tyvm
@blastmybrainoff3 жыл бұрын
Does this work on 2008+ model years?
@CycloneCyd3 жыл бұрын
Yes, all model years
@CarMotionUSA3 жыл бұрын
Can you tell me how to turn off the sleep limiter function. I bought the 2008 saab 9-3 and it has 70mph limit set(some parents probably set it for their kids) so now its quite annoying that it makes noise when i go over 70mph. There is gotta be settings for it?
@MrOikono3 жыл бұрын
Cyd I just started doing the “turkey Baster” method to change my brake fluid. Omg it’s like totally black compared to the fresh one I am putting in. I think though that I will need a lot of bottles to see a difference as with every go at it , I take out new on as well. Any idea how much it will take to see a difference ?
@CycloneCyd3 жыл бұрын
The total capacity of the brake system is about 1.2 litres. Sounds like it's not been bled for a long time (if ever), so bleed plenty through. When changing brake pads, folow my method of fluid bleeding so you're always topping up with fresh.
@jetguy12053 жыл бұрын
Do you have resistors on the standard reverse lights to prevent flickering?
@CycloneCyd3 жыл бұрын
Resistors and relays: kzfaq.info/get/bejne/r6eFdNiSztm-p2Q.html
@jetguy12053 жыл бұрын
Do the decoders get hot when powered on?
@CycloneCyd3 жыл бұрын
Not when the white light is on, no. They do get warm when indicating though. It takes about 4-5 minutes for them to get quite hot to the touch, but you shouldn't ever need to be indicating for that long. I've ordered a new 'toy' - an infrared thermometer. So I'll be able to test how long it takes for them to get "too hot to handle" and I'll post results in the community section (with a link in description)