Here's the next design we went with for 2020: kzfaq.info/get/bejne/r9-qe6yctLeve30.html
@HensleyDon5 жыл бұрын
Very attractive! Your panels fit everything in the description beginning at 1:25 except "expensive." They make for an inviting, soothing to the eye background while doing nothing in the way of being a distraction. A Job Well Done, indeed.
@ajp1019795 жыл бұрын
Alternative to LiquidNails would be a dot of Hot Glue on the frame, while the glue is soft depress the Strip in. Very helpful near corners. I’ve wrapped the inside of a Drum shell with 15’. I also wrapped the contour of an acoustic guitar for a window display and hot glue was the only thing to hold the LED Tape in place. Nice job and great ideas you’ve shared.
@aportman584 жыл бұрын
My kind of guy! Simple and makes it work and look professionally! Thank you!
@ocyouth70614 жыл бұрын
We just built these for our youth building. Super cool! And low budget! Thanks for the idea!
@chrisw14625 жыл бұрын
An alternative for Liquid Nails would be superglue. Stick your LED tape fully to the inside first, then go around and just add a drop every few inches by putting the applicator tip right at the edge of the tape. The liquid will pull under the tape and spread out a little, making a fast easy bond. A lot less messy than construction adhesive, too! (well.. if you're careful) I know these things are light (hehe), but I don't recommend zip ties. They're probably strong enough now, but they get brittle over time. A simple screw eye is much better, and you can get a lot of them for a few dollars. (Use pliers to open the 'eye' just enough to slip the chain in. Then paint them black, since the pliers will scrape paint off.)
@fatboyshadetree51395 жыл бұрын
Oh wow. I am totally gonna steal this idea for my daughters room. Gonna make one just not as big. Maybe 4×4 and figure out a way to control it like with a remote. Thanks for the video.
@RecioCulture5 жыл бұрын
Angelo Jensen theres rgbw strips with irc remotes
@BL-ts1vc4 жыл бұрын
Thank you so much for this video! We used this video as an inspiration for our new set at Freedom Church in Mt. Sterling, KY. God Bless You!
@EZYouTube5 жыл бұрын
Your videos are very inspiring. Thank you very much, greetings from Argentina.
@geraldmawanda37192 жыл бұрын
Love this thank you so much. This has really inspired me to do something creative for our church. God bless you
@alp6920075 жыл бұрын
You should make some video... How to mapping led strip light. 🙏🏻
@stevegell-v.o.r94965 жыл бұрын
Men you an inspirational ❤❤❤ praying for you to continue growing in (wisdom). Big love from kenia
@Max.Mustermann.5 жыл бұрын
thats precious now make it an infinity mirror ^-^ looks stunning 😱 👍great work !😃 thanks for sharing and have a good one :>
@WorshipLeaderHangout5 жыл бұрын
Thanks for watching
@thomascrosby15505 жыл бұрын
Your ideas and videos are excellent. Thank you for helping others so effectively. But please remember that many churches are much smaller than yours and do not have all those resources. This project could have been simplified if you chose a frame that would be exactly 16 feet in "length" (like a 5'x3') to save money and effort on the led strips. Plus, these LED strips usually come with a remote that could be used to control color and some color-changing effects withOUT having to buy the DMX converters and using DMX controllers. Anyone with a thumb could make the panels change colors, which might be fine for some small churches.
@WorshipLeaderHangout5 жыл бұрын
Thomas Crosby thanks for the compliment. I do what’s best for my church and the size of our stage and budget. It’s up to the viewer to decide what is best for their church.
@dasboot59035 жыл бұрын
A very good idea !!!! Thank you for sharing it with public !!!!
@daniels98355 жыл бұрын
Simply beautiful and great teamwork in church
@Captain-Awesome5 жыл бұрын
Nice Job!! I am a custom home builder in the North Texas area. I am going to use some of these details in my homes.
@BenTvHowman5 жыл бұрын
I love This, so creative and awesome. Shout out from Melbourne Australia
@robinhayat1125 жыл бұрын
Awesome video I had a yarn project in mind and this made it so much easier
@blazinvybes_8295 жыл бұрын
something so simple with such an impact, great job looks amazing
@2fishconsultinglimited6513 жыл бұрын
You are such a great guy.Have been searching for simple solutions for our church for ages and this is really good.I didnt really get the second wood strip u mentioned on top of the rectangle though.I will give it a go.
@jschmidty235 жыл бұрын
You should have just used a 27 channel decoder. Probably spend a lot more on individual decoders for each panel and the extra dmx cables. Also not sure if you did this but have a connector on each panel so you can unplug them without screwing the wire from the decoder or cutting the wire. Very nice though!
@WorshipLeaderHangout5 жыл бұрын
Good ideas! Thank you. And thanks for watching.
@user-eu3mn6ss5l4 жыл бұрын
That is REALLY clever. Thanks for sharing!!!
@djpedromixhouston3 жыл бұрын
great stage Desning, will do the panels for sure , Thanks great video to watch
@WorshipLeaderHangout3 жыл бұрын
Thanks for watching!
@Fpvpilot9285 жыл бұрын
I really see God's presence on that techno stage...
@Makfly795 жыл бұрын
That is no techno stage. I was a techno DJ many years ago, and this is not even close to it. Add some near naked women, a wall of speakers, and thousands of dollars of lighting, and maybe you would be right. The only thing in common is there being a stage, and lighting. There would have to be techno music to be a techno stage. Do you call a heavy metal concert a techno stage too? How about country, and western? Every single stage on the planet uses modern technology. I suppose you want them with lanterns XD. If you do not like it, stick with your church hyms from the 1800's, and see how many young people you get to go to church. I used to fall asleep in church when I was young. You have to keep up with current times, and we happen to be on to LED lighting over candle light this day in age. I havn't found scripture against stage lighting yet.....
@egg66495 жыл бұрын
ChooseLife Perfectly Said.
@sosassteelstrings96235 жыл бұрын
I could be wrong for thinking like this. To me it shouldn't be about grabbing youth attention. Yeah we should try to keep people in church. But shouldnt your love for God to serve him be enough? Desire to pray, to read scripture, to fast be enough for you not fall asleep? There is a problem with the body of Christ today. In Acts 2:41 Peter gave word from the Spirit of God& 3000 converted. Obvi bible doesn't mention any bands of worship and fancy stuff(i know I cant compare modern tech to a time that any exist remotely close). But all he needed to win the hearts of people was the Spirit of God.(im not against music to God I play guitar@my church. We take from David example of worshipping with dance, literature, instruments) I hope you dont see me singling you out for I too am the problem for claiming to be of Christ yet i am dead spiritually. There is just such a focus on worship. When was the last time a whole Sunday sermon was in just straight prayer and fasting? We take prayer from what Christ taught to his disciples. Fasting cuz Chrsit did it 40 days&nights, Apostle Paul too in the desert, in the old testa too with the book of Daniel for discernment of dreams. Worship aint wrong, is that do we really need dark ambient, lights and smoke to feel God's connection? Not saying that the Apostles didnt do that who knows only God. I hope this is recieved in light may God's will be done in our lives Amen.
@Maiatudo4 жыл бұрын
Kara sensacional parabéns muito topppp by Brazil 😃😃😃👏🏼👏🏼👏🏼
@vijayakumarvijay9541 Жыл бұрын
i liked your video and really inspired,thank you very much.
@chb035 жыл бұрын
This is my jam! Lights and DIY!! This looks amazing!
@Muradiko5 жыл бұрын
awesomely simple and great stuff, thanks for sharing
@thetyler.smith15 жыл бұрын
Excellent idea man! Well done for sure!
@eddysel104 жыл бұрын
Nice job. I will do something like this @ my church too. I would like to receive more info about this.
@matthewserrano2020Ай бұрын
Hey thanks for the great set design idea. Was thinking of running this set design for our next series. Question on the decoders. Do we need to get one for each box or can we do it in groups? Like for example we were thinking of maybe putting three on our back wall so maybe we could some how attach all three on the led strips together for the back wall and maybe hanging 1 on each side of the truss to give it a 3d look. They would probably have their own led strip.
@danielkibira40643 жыл бұрын
HalleluYah 💯💥 great advice, wonder if you could do a parabolas design. 🤓The simplest solutions are usually the best.👍
@WorshipLeaderHangout3 жыл бұрын
Great suggestion! Ive see it done. Looks so cool. Thanks for watching.
@GeorgeBonez5 жыл бұрын
Man this is a really great and helpful vid. The possibilities are endless using LED strips and DMX decoders. Thanks so much for sharing T
@WorshipLeaderHangout5 жыл бұрын
Thanks for watching
@ryannowicki5 жыл бұрын
Love it! It'd be awesome to learn more about the other lights you have in your setup.
@Mr63455 жыл бұрын
I need more videos like this! This is so good!
@sterlingsteen73424 жыл бұрын
YOU ROCK! Thank you so much for this video!
@rodrigopedras40635 жыл бұрын
You only need one decoder to power up all the panels? Love your work!
@WorshipLeaderHangout5 жыл бұрын
Actually yes, it would need to be a multi channel decoder. However, I just used one for each panel.
@mungpijoseph5 жыл бұрын
Thank you
@aportman584 жыл бұрын
Cool! Great job!
@charlescollins15453 жыл бұрын
Wow! am impressed
@keele854 жыл бұрын
Love it! Thanks for the time it took to share this, and the encouragement you shared. :)
@sire_eben5 жыл бұрын
This is awesome... Thanks a lot
@WorshipLeaderHangout5 жыл бұрын
You’re welcome. Thanks for watching
@Aaron_Yeen5 жыл бұрын
Amazing video, thanks for making it so detailed and explaining everything so well, this vid should get a lot more views :p
@yuleisicastillo14122 жыл бұрын
Thank you for this video 🤩
@mowguy15 жыл бұрын
How fun, wonder what Jesus would think about all the fancy stage props. I'm guessing He is really impressed.
@cameronnagle5 жыл бұрын
This is awesome
@23Ralfi5 жыл бұрын
This is very helpful
@moniquewrites90465 жыл бұрын
It so pretty
@samuelsmall84495 жыл бұрын
Great design and video.
@BrendanYoungMusic5 жыл бұрын
Looks awesome, man! What church are you at, if I may ask? As a traveling musician, I may build a few of these... I already bring all my own moving heads and haze 😂
@WorshipLeaderHangout5 жыл бұрын
It’s called College Park Church in Greenville, SC. Thanks for watching!
@Favorntmusic Жыл бұрын
This is really nice 👌🏽
@WorshipLeaderHangout Жыл бұрын
Thank you
@TheBassLizard3 жыл бұрын
Check your local fire / safety regulations. Use of zip ties and single break devices (ie: chain) might not be permissible for suspended items over/near people. You might need to switch to steel wire, which also comes in black.
@yosafatsipayung70544 жыл бұрын
amazing video. Jesus bless you abundantly
@jacoblondon93055 жыл бұрын
Hey Chad !! I have a question. How many sections do you have for your portable stage and what company did your church purchase it from?
@jcadventurehd5 жыл бұрын
nice video keep up the good work
@KingdomTalent5 жыл бұрын
Thank you!
@josuecopete5 жыл бұрын
Awesome vid! My question is; how do you link the LED strips to one another ? Same RGB cable ?
@WorshipLeaderHangout5 жыл бұрын
There are connections you can purchase but we just had two strips connected to the same decoder going opposite directions around the design panel. Thanks for watching.
@EmersonDayMusic4 жыл бұрын
How did you get the length you need? We’re trying to do this for our stage and I’m wondering how to accommodate for the length did you add additional cable?
@splpro82215 жыл бұрын
great videos thank you
@robertrickman35313 жыл бұрын
Ive used Rustolium CAMO Black spray paint for small projects. It Completely goes away in the dark. Also, i would have used small EYE Bolts on the top of the frames...open a link on your chain and you have a Hook!
@MrRedsi4 жыл бұрын
So you essentially made to panels? One with thread and the other with the LED’s then just put them together?
@WorshipLeaderHangout4 жыл бұрын
It’s just one panel with yarn on back and LED strips on inside
@MrRedsi4 жыл бұрын
Worship Leader Hangout thanks
@joshuawest60505 жыл бұрын
Awesome Video! Love your passion for serving the church. Random question about your lighting rig: what make/model light are you using for down wash lights above/sides of the center screen and what make/model lights are your beam stage up lights? Appreciate the great content! =]
@WorshipLeaderHangout5 жыл бұрын
Joshua West our wash above and beside the screen are Chauvett slim pars. The movers are adj Focus Spot Three z. We use Source 4 Jr.s for the front wash. Thanks for watching!
@femifaronbi38093 жыл бұрын
Amazing
@offmychestlife5 жыл бұрын
Can you do a video on best options for lighting consoles for churches with 500-1000 membership?
@paulalexis57682 ай бұрын
Hello wanting to do a hybrid of this design with the curtain design you did. May I get some help, a few things im not sure about
@frontrangeworship25314 жыл бұрын
Do you know roughly how many feet of yarn you needed for all 6 panels?
@FJDamitTV4 жыл бұрын
This I think will only look good for black or dark painted walls of a church?
@verowellsaid4 жыл бұрын
May i know how many watts did you use for the led tape? Thank you
@andrewscot52042 жыл бұрын
Not sure if anyone asked but what do you do for extra light strip areas? Let’s say you need 20ft and you have a 30ft light strip… how do you black that area out and/or attach it to wood?
@WorshipLeaderHangout2 жыл бұрын
Most of the LED tape you can get on Amazon will have an area on them about every 2 to 3 inches apart that can be cut. Therefore you can cut your LED tape to the ‘exact’ size you need. I use gorilla glue to attach them to wood.
@andrewscot52042 жыл бұрын
@@WorshipLeaderHangout Awesome! Thanks for the reply.
@daliaandrehafloresflores5353 Жыл бұрын
Hola , buenos días espero su respuesta , de si podría mostrar paso a paso como hacer la parte del hilo?
@kokangayir94084 жыл бұрын
Sir how many inches projector screen is that
@Michael_Is_Avg4 жыл бұрын
We don't have a dark stage set-up. Do you think this could still be worthwhile and that the lights would be bright enough?
@danielmanning71814 жыл бұрын
Chad, love all of your material! We are running with this design but wanted to know what you would recommend to make the actual lights less harsh visually, while still illuminating the yarn. Our space is small and the lights are a little harsh on camera. I’m not crazy how you can see each individual light. Any help would be much appreciated.
@XXXXSSDDXXXX3 жыл бұрын
You need diffusion for the lights.
@AlexMorganMusic5 жыл бұрын
Hello, would this give you control of each individual pixel on the strip or just the strip as a whole???
@WorshipLeaderHangout5 жыл бұрын
Just the strip as a whole. Thanks for watching.
@bretthays26745 жыл бұрын
For that you would need WS2811 or similar rob led strip and a dmx to pixelnet decoder. Still very doable and inexpensive but a bit more complicated; both on the construction and programming sides. I would suggest a dmx box with built in patterns that you could call up from a single dmx channel.
@chanakasenanayake55375 жыл бұрын
Is the dmx decoder safe to leave lying around on the ground? Main concern is exposed cabling going into the dmx decoder. IS there any alternative instead of cutting a power brick to connect into decoder?
@konstantinostheodoridis91284 жыл бұрын
what type of yarn do you use? (wool-cotton-acrylic or crochet thread?) and what diameter?
@gopherbracken4 жыл бұрын
Do you have a link to what you used to lengthen the light strips to put the encoder on the ground?
@tkcreativeco5 жыл бұрын
Do you have to have a decoder box for each led strip? Or can you simply daisy chain them all together?
@WorshipLeaderHangout5 жыл бұрын
I used a decoder for each strip for this design but I probably won’t in the future
@alexjos76255 жыл бұрын
what moving heads are you using in your church?
@WorshipLeaderHangout5 жыл бұрын
Alex Jos those are Adj Focus Spot Three Zs.
@rommelwalohan57305 жыл бұрын
Another question.. We're using 3 wires cable for DMX. How will I connect the LED Tape with 4 wires to the dmx cable with 3 wires only?
@WorshipLeaderHangout5 жыл бұрын
I’m not sure it’s possible to only use 3 wires because you need one wire dedicated as power. I was using the 4 wire DMX simply as extension wire not used as dmx. I might test this out and get back to you. Good question.
@rommelwalohan57305 жыл бұрын
Thank you for the response. I think I just need to buy 4 pin extension wire for RGB strip. This will go fine regardless if were using 3 wires DMX cable since the 4 wire will just be used as extension. Right? Sorry, I'm a newbie with this lights thing. 😅
@jamessitton5265 жыл бұрын
If only 3 wires then you not be able to hookup all 3 colors.
@prof18113 жыл бұрын
I know its a little late, but don't use DMX cable for extending "power" wires. These cables are designed to transmit signals. They might get hot and loose a lot of power over distance resulting in dimmer LEDs an other risks.
@DTHAW5 жыл бұрын
If your LED tape was only 16 get long, how did you get them to fill the whole panel? 8' by 3' is 22' total.
@thomasdphotography28735 жыл бұрын
I have the same question.
@just_a_nother_Matt_on_YouTube5 жыл бұрын
The light strips come with a special connector so that you can connect two strips together.
@thomasdphotography28735 жыл бұрын
Do you need to adjust the power supply for that?!
@WorshipLeaderHangout5 жыл бұрын
I used two strips. Started at the same corner and went the opposite directions. Connected them both to the same decoder. No extra power needed.
@dukekraus43622 жыл бұрын
Hi Chad, Thanks so much for this design. We did copy it with a little different frame. Do you Haze your stage and which machine do you use? Love to send you a pic.
@WorshipLeaderHangout2 жыл бұрын
Hi Duke, thank so much for watching and using the design. We do use haze and I like the Amhaze whisper by Chauvet a lot. It’s perfect for our room size.
@WorshipLeaderHangout2 жыл бұрын
Also, yes please send a pic to us via Instagram if you can. Would love to see it
@theblacklines5 жыл бұрын
You think I can use gorilla hot glue instead of liquid nail?
@sheldonodhiambo4311Ай бұрын
Hello how was the wood like
@onedaysocial5 жыл бұрын
I subscribed!
@jamessitton5265 жыл бұрын
I wonder how it would look with monofilament fishing line?
@JoeEvansSound4 жыл бұрын
Yeah true. I wonder what fibre optic would look like
@theblacklines5 жыл бұрын
Also, do you have a link to the laser you used?
@brandonadeniji97994 жыл бұрын
Hello, please is it possible to know the W,L,T of the wood that was used?
@WorshipLeaderHangout4 жыл бұрын
I use 1”x2”x8’ pine.
@verythorough5112 жыл бұрын
What paint do you get with the Behr Marquee? do you get a certain color?
@WorshipLeaderHangout2 жыл бұрын
I don’t have the exact paint code. I ask for flat black
@AndyGonzalezMusic5 жыл бұрын
Question! at minute 10:01 how did you connect it the dmx cable to the led tape? can you show the process to it or link a video?
@fatboyshadetree51395 жыл бұрын
Looks like he used simple automotive butt connectors. They are easy to use. Insert wire and crimp with pliers. I might have spliced the wires or used a male/female connector with the rubber covering to let me pull it apart as needed to move or rearrange the panels.
@seunakande3830 Жыл бұрын
can these tapes work with the 32 channel decoder from other videos u poseted
@WorshipLeaderHangout Жыл бұрын
Yes they would. But you would just not use one input because these only have 4 wires. RGB and power
@adiarmaldonado35425 жыл бұрын
Where can i get the black wire
@WorshipLeaderHangout5 жыл бұрын
You can order bulk DMX cable online. Amazon may even have some good deals.
@GLOBALMENtelefilms5 жыл бұрын
Hello ... how could I contact you .plz leave message
@rethinkchurch32365 жыл бұрын
So maybe I'm missing something, but every time I connect my 2nd panel that panel flickers. Any ideas? I can swap the initial panel and the 2nd one and the same issue happens each time.
@kennmossman87015 жыл бұрын
my LED / electronics consulting fee is 20 USD / hour
@jamessitton5265 жыл бұрын
Sounds like you need more power.
@aaronluna55114 жыл бұрын
What kind of power supply does the dmx decoder need? How many voltages? Does it need to be 12v 5a?
@WorshipLeaderHangout4 жыл бұрын
The 12v 5a works great for the 4 or 5 channel decoder. I use a 32 channel decoder that allows control of 8 strips. The power supply is larger as well. Check out our latest stage design video we posted last week. Thanks for watching
@aaronluna55114 жыл бұрын
Worship Leader Hangout Thank you!
@aaronluna55114 жыл бұрын
Worship Leader Hangout I am having trouble getting the dmx decoder to work with the led lights. I have plugged in all wires into their corresponding channels and the led lights do not turn on. I made sure to turn on the dmx decoder and nothing. I’m using an rgb led strip, the same dmx decoder from the video, and a power supply of 12v 5a. What am I doing wrong? Please help.
@olithebackslapper91125 жыл бұрын
What's the name of the intro song?
@KevinStCroix5 жыл бұрын
Make sure not to mix up the colored wires, it will render your lights useless.
@ericmelendez57195 жыл бұрын
I see you have a 24 channel DMX decoder listed in the description. Where/how did you use that in this design?
@WorshipLeaderHangout5 жыл бұрын
I don’t. I’m playing with one for a new design later this year. Also, people were asking if they could use one instead of the single channel. Thanks for watching.
@ericmelendez57195 жыл бұрын
Worship Leader Hangout Thanks for the reply. Second question, what do you do with the left over led tape? So once you go all the way around, do you just cut the tape?
@WorshipLeaderHangout5 жыл бұрын
Yes, we cut it on the designated cut line and use it for something else like behind a screen at the sound booth or smaller fixtures for the stage.
@ericmelendez57195 жыл бұрын
Thanks for the reply. What size was the wood that you guy purchased?