I thank you very much for your tutorial,the steps are very clear,your are the best ever!

Wow! that is a ton of wires connected to the controller! I can't imagine running so many wires from so many mounting points! It does look sexy! I might try a few connected to my brakes for safety!

Awesome! Thanks for sharing this video.

Just bought a Hayabusa with an LEDGlow kit already installed. Didn't know until I searched for a product for my other motorcycles. I must say these kits are just plain awesome. Whoever installed the kit I have did an AMAZING job. You can't even see the LEDs, but if you look at my video you can see the kit at work. It's amazing. WELL SPENT $100!!! I'm VERY impressed, guys.

i had one of these kits. I loved it! To bad i had to be a adult and sell the bike to pay med bills... well i just got a new bike. will have to invest in another kit in the future. Nice simple guide btw!

Just a little bit of advise for future questions... If any part of your bike is powder-coated, like my frame and fenders are on my 2001 Yamaha custom roadstar 1800, you have to use gorilla glue or the the led light strips will not stay attached to the powder coated parts. Otherwise, I installed the 10 piece with the 4 piece I already had installed and it's all-together awesome with the beat-feature of my 6 speaker stereo system... My buddy has similar lights on his bike, that were a lot more expesive, and he kicks himself every time we go riding and he sees my lights... He paid about 200 for his, and doesn't even have the beat feature, and his lights are no where near as bright as mine, and he only has 6 colors... For the cost, this deal is the best out there!!!!

Ahhh man this video made me look forward to putting white led lights on my sportbike. Thanks for informative video. Time to get installing!

Awesome video….very detailed, the best install I've seen. Happy it was a video made in 2014 and not from 3-4 years ago…..Looking to purchase my very first set. thank you

Awesome, thought I was going to have to get someone else to do it

i just installed mine today these lights are not that bright like showed in your videos are they adjustable ?

Is there somewhere convenient on a dyna that you can install an on/off switch?

That looks so cool!!

How much current do they draw? Are they wired in series or parallel? What type of resistor is in the control box? Thanks

Is there any way u can install under front wheel fender safely and Securely

How to connect led strips with power switch

Will this work on a Victory Cross Country Motorcycle?

what size fuse does it take

there is a video for the headlight of the thunderbird commander

Can I choose how many strips I want to use in the zones? For example,....if I wanted 4 strips for zone 1 and 8 strips for zone 2 can I do that or if I wanted 2 strips for zone 1 and 10 strips for zone 2 can I do that?

I have a question, I really want the 12pc. kit but I do not know if I need the wire extensions, if they come with wires, and or if I need to buy the wires when I order the kit. I want to mount them in the same spot as the video aswell. I have a 2014 Harley Davidson Xl1200 Seventy Two. Thank and hope to hear from you guys soon!!

just a quick tip I have these ones and they drain your battery unless you connect the power wire into the headlight wire and the ground to a common ground or the head light ground

Hi and thanks for the video tutorial but I have a quick question I brought the LED lights installed them it worked fine although the next night I press the on and off button on and my lights didn't come on I only use them once and there still new out of the package any suggestions of why it's not coming on?

Mine keeps blowing the fuses. Was working at first then blew fuse after fuse not even working now. Any advice?

Well done

quick question will I be able to install it into a daymak em1

Here's my tip... use something other than the double sided sticky tape to mount the strips.. no matter how good you clean your bike with prep pads, and adhesion promoters the lights will end up falling off in no time.. no double sided sticky tape on the market is going to hold any strips to any surface for very long, especially in hot/cold/wet temperatures ..plus you add in the fact of the vibration from the road and the bike itself it makes it that much likely for the lights to come off.. led companies need to step there games up An come up with a lot better mounting solutions.. yes they have brackets on the market but they don't work well on bikes, than you have the zip tie option which doesn't do well on anything on the outside of a vehicle ,especially a bike because once the tape fails and zip ties are in place you end up with drooping led strips .. I've been installing leds on cars/trucks/bikes/boats etc professionally for years an I have tried all kinds of different methods an epoxys seem to work best , but still not good for a bike since it's messy An can be visible , plus you putting the epoxy on your paint/chrome An it's very hard to clean up.

I have bought the LED lights, however I have no idea on how to connect the small black and red wire to the battery. Any suggestion?

One more thing, in the future, it would be great if the kit came with plastic plugs to place in the end of the light strip if/when you are not connecting another extension wire or light strip. It would be much more convenient that electrical tape or the heat sleeves... just a thought... thnx...jlg...

I have a question i have already a led kit but i just bought one that has a changing pattern with remote is it bad to mix or have both on same motorcycle ? And my kit came without the plug to the remote that has the multi connector do i have to get one to make it easier to install

i hook mine back up to my bike and when i did thay wont cut off thay change moshing and colors but wont cut off what do you think is wrong

if your wire doesnt reach ur battery from where you mounted your light what can u do?...

Old video I know but my kit has a battery saver switch and I have no clue how to install that. My battery is dead and can not find any information

Pretty. Awesome. I'm more interested in the bright advance light though but I can't get a custom kit for kit. There's a custom kit for the million color, but I just want two different solid colors. Which is only available for the classic options. Might get it and hope it looks nice and bright.

What about the wire for the break so that when you press on the break all your lights turn red? Does it connect to the positive or negative?

what is the white wire attached too?

hey, I have lost my bluetooth remote to my LEDs and now can't use them... can I buy a new remote. can I hardwire the lights to my bike so every time the bike is on so are the lights? what can I do

Stupid question here. Will these lights work on a 150cc 4 stroke scooter?

Hallo nice video, thank you, but unspecified where to connect the blue wire?

Love if you show a video to install brake feature

I notice you never mentioned that white wier that in that kit

How can i just put red and blue with strobe.

What is white wire ?Is it like antenna for the Remote?

do you use any kind of fuse or those come with it ? if not what sizes would you reconmend ?

Niceeeeee

What if I hook mine up but they only stay on for about 5 secs then turn off

Hay bro I put the same lights on mine but for some reason they started to come on by them self and would kill my battery and when turned on it stayed on red and know don't even turn on what the problem do u know let me know please

This music makes me wanna play Streetfighter! 😅

My motorcycle mechanic said that additional lights on bikes here in Washington State are illegal. I'm trying to research this, but haven't found much. Have you run into issues selling your product do to State law banning it?

wat about the white wire

in which online ..I will buy good led ..please tell me

why would you mount the led on the frame rails? how do you jack the bike up now?

What's the white wire for?

What is for the white wire?

So the white wire goes no where?

Boss How i install LED light on my royel enfield?

What’s the white wire for ??????

Small white is for what

Someone asks song it is Sean Balli - Just hold on "sport motivation"

Awesome video also whats the name of the background songs?

Just install my lèdglow I test it now it don't work when I het the key pad

Hi I am in india can i order this & what will be the price for a 12 piece kit for my Royal Enfield Classic 350CC. Can you deliver this to India. Earliest reply will be appreciated. Thanks..

I tested my install BEFORE I put my seat back on.

How bright are these they don't look very bright

What if you got a greasy harley? I bet I'll just be dragging leds down the street

How to I connect the power to battery without it killing my battery ??? I connected it same way you did in t he video and I came out the next morning and my battery was dead ?? Any suggestions ??

What's the white wire for?