I’ve grown use to how Lee shoots and edits over the 5 years I’ve been watching his channel and I was biased at first but I’m loving how this is being shot and edited it’s similar but different.
@leestuart3817 күн бұрын
Glad to hear man. I love the change and the direction things are going as we refine it
@sandersakkee928417 күн бұрын
Awesome to see so much content coming from you. Lovin it.
@leestuart3815 күн бұрын
We're just getting started 🤘🏻
@jmpaul716 күн бұрын
Your channel is always my go-to when learning new tips and tricks for printing, but I also love seeing all of the little space savers that you’ve implemented over the years (cutting foam to hold the ink cups = 🤯) Simple solution and super clean looking! Keep doing what you’re doing man!
@leestuart3815 күн бұрын
Always happy to hear that, thanks!
@crackshotscreenprinting17 күн бұрын
always great content, thanks bro
@leestuart3817 күн бұрын
I appreciate that 👊🏻
@Tim.McElheny17 күн бұрын
Thanks for posting
@distinctperformancellc17 күн бұрын
Wet on wet print came out sick! Love the idea with the mixing cup holder. Let us know how it worked out.
@monstamemorabilia144717 күн бұрын
Another banger video guys 👌👌
@leestuart3817 күн бұрын
Thank you 🙌
@edgarrivera53217 күн бұрын
amazing print @lee Stuart..
@montymartin293217 күн бұрын
getting stuff done!
@leestuart3817 күн бұрын
Always 🤘🏻
@Factory928AC15 күн бұрын
Movie quality shiiiettttt 😮💨🤟🏽🔥
@leestuart3815 күн бұрын
Thank you 🙏🏻
@Smallbore2wheels17 күн бұрын
Dude I remember the original print of that shirt in the basement!
@mattsconberg822517 күн бұрын
solution for tipping mixing cups - use wide mouth uline mixing jars with screw on lids - wider yet shorter (good for stacking space) and wont tip over with a spatula while empty. 👍 come in clear or white - s-22855 / s-22856
@leestuart3817 күн бұрын
I'm not a fan of those jars because they take up so much space when empty,and they cost a lot. The paint style cups can stack inside of each other which is a lot better for my small space, and they're cheap. Plus I had issues with those jars cracking over time when I used them a few years ago.
@luiscarlosbrenes957917 күн бұрын
Round cut a magnet sheet and stick it to the bottom of the cups.. like the ones on the back of souvenir fridge magnets.. maybe would work 🫡
@JaxonRyan_Creative15 күн бұрын
I just picked up 12 of the U-Line cups for $20
@mattsconberg822513 күн бұрын
@@JaxonRyan_Creative yeah man, pricing is actually the same as other mixing cups really - hope they work out for ya, I love them, and the look.
@colinhuggins616417 күн бұрын
For a shiny black on black look you can also use a clear ink (something with some body, doesn't need to be a gel). The use of a clear will also give the print a small level of depth, similar to stacking color and clear in a paint job.
@thenotorious98917 күн бұрын
Shit gets better every week, fucking unreal. Keep it up!
@leestuart3817 күн бұрын
Thanks!
@TRexTravis17 күн бұрын
How did i not realize that you are a Lefty??? Thats awesome! Team Lefty! 👊
@leestuart3815 күн бұрын
Lefty life 🤘🏻
@tylergiesa53186 күн бұрын
Where can you get that table cart you have for inks and squeegees?
@kelleycoon207017 күн бұрын
Your little cleaner holders you should the same thing with your paint on that little table. you did foam. there’s a little lip underneath that little table that you can fasten it to.
@matthewmanning841316 күн бұрын
Can we get a bonus video, with all of these improvements, in quick cuts
@leestuart3815 күн бұрын
We can definitely do that eventually once we have enough to fill out a whole video
@DrawinIntrvrt17 күн бұрын
OG’s remember this job from the manual days! 16:17
@leestuart3817 күн бұрын
It's been a while! Cool to revisit it and see how much everything has improved
@gelogonzales895013 күн бұрын
thinking of under magnet on paint container bro
@JaxonRyan_Creative15 күн бұрын
Thursday is the 4th for us down here, are you going to shift the Rogue Report to a different day or is it a take or leave it kind of deal.
@leestuart3815 күн бұрын
It'll still be on Thursday
@fartnyaface17 күн бұрын
Put app tape down on the ss table it will protect it and once finished just rip it up and repeat.
@leestuart3815 күн бұрын
Turns out ink just wipes right off the foam so it's not an issue
@2011cardinal17 күн бұрын
Do you know what the noise levels are in the shop? Seems quite loud when stuff is running and youre recording.
@leestuart3817 күн бұрын
I have no idea but it can get pretty loud in there with the air compressor and embroidery machine running together
@TrueArtPassion17 күн бұрын
What Meshcount do you use for the Underbase this two Wet on Wet Prints? 🙏🏼
@leestuart3817 күн бұрын
These were both done with a 150 thin thread base and 225 for the top colors
@TrueArtPassion16 күн бұрын
@@leestuart38 thank you! I use a 157 thin thread mesh for the underbase, but unfortunately it doesn't cover very well with a one hit pass, so the top color unfortunately always lets the black of the T-shirt shine through. I stamp the underbase and I work with the Wilflex colors. I work on a manuell hand press, Can you give me a tip please?
@michaelapplewhite47159 күн бұрын
Do you stamp and use roller?
@leestuart389 күн бұрын
We use the stampinator most of the time, but I do use the roller for certain things.
@RyanvsYouTube15 күн бұрын
Great shit keep it up! Then hire me HAHA!
@leestuart3814 күн бұрын
If you're local I'm always hiring
@RyanvsYouTube13 күн бұрын
@@leestuart38 I’m sadly not in in Texas but you seem like your a kick ass boss, I’ve been a director for a couple years and company, we print for Dallas Cowboys, Buccees, Sony and ect.
@JeffreyHammerCam17 күн бұрын
Throw a magnet in the bottom of the cups, easy to pick up and won't be top heavy and you'll never need to try to clean that foam
@leestuart3817 күн бұрын
That was my first thought because I love magnets, but they sit on a lot of non magnetic surfaces too and the magnets made them more unstable in those cases when I tried it
@JeffreyHammerCam17 күн бұрын
@@leestuart38 Later in the video I heard you say "stainless steel" but the foam looks great cut on the laser, nice work!!
@scottcerk595916 күн бұрын
How many square feet is your printshop? It’s sweet.
@leestuart3816 күн бұрын
Thanks! It's pretty small but it gets the job done (that's what he said). It's 1250 square feet
@TG.3429517 күн бұрын
🏴☠🏴☠🏴☠
@Alexvenlo17 күн бұрын
Hear me out: Watercooled palets for wet on wet. :D
@crackshotscreenprinting17 күн бұрын
I would cover it in pallet tape, gets dirty, pull it and replace it
@leestuart3817 күн бұрын
Turns out the foam doesn't soak up ink or stain, it just wipes right off
@EGOALTER-jz5qo14 күн бұрын
Lee Stuart is tht boss that says “ill just do it so itll get done and be right” not cool
@leestuart3814 күн бұрын
My employees definitely would have something to say about how wrong that statement is lol. But at the same time if someone can't figure something out or do it to my shops standard, of course I'm going to hop in and do it. I'm the most skilled person in this building 🥴