Leica Geosystems | DISTO S910 - P2P and CAD Integration
Рет қаралды 22,434
Күн бұрынDaniel Overton takes you through the advanced Point-to-Point (P2P) features of the Leica Geosystems DISTO™ S910 and how it integrates with compatible CAD software.
Measure the tie distance between two points, even if you are hundreds of feet from your target. Shoot Point 1 then Point 2 and the DISTO S910 displays the distance between them. Widths, heights, diagonals, gaps, it doesn't matter: Just measure the start and end point and the distance is displayed.
The Leica DISTO S910 connects to compatible mobile apps with Bluetooth and exports DXF files over WiFi.
Visit the Product Page for more info: survey.crkennedy.com.au/produ...
@198000669 Жыл бұрын
Hi I have a question for a survey of an external building, what error does this instrumentation have compared to a total station? Have any comparisons been made? are we talking about centimeters or millimeters? Thank you
@johandelgado5463 3 жыл бұрын
EN QUE IDIOMA ESTA LA PRESENTACION Y SABER SUS FUNCIONAMIENTO EN ESPAÑOL GRACIAS DESDE PERU
@CRKennedyGeospatial 3 жыл бұрын
Lo siento, no hablo español. Solo inglés. Prueba el distribuidor en Perú www.qsindustrial.biz
@evandropauli3925 3 жыл бұрын
I am very dissatisfied because mine of this s910 just does not update.
@CRKennedyGeospatial 3 жыл бұрын
Where are you located? I'm sure your local distribution or service center can assist you with solving this problem.
@evandropauli3925 3 жыл бұрын
@@CRKennedyGeospatial has already been changed, it crashed. The new one I have does not update to the newer version, I have already followed the procedure with the support of technical assistance. no way.
@redcabinstudios7248 3 жыл бұрын
How do I reference station points and take measurements of multiple rooms in single cad plan of a building with this? Does BricsCad comes free with buying Disto?
@CRKennedyGeospatial 2 жыл бұрын
You can use station points to relocate the S910 when linked to CAD and using the S910 plugin as shown in the video. Unfortunately, BricsCad does not come free when buying a Disto but they do have a free 30 day trial on their website.
@aadilreshi9379 2 жыл бұрын
How can I measure infinite points?
@CRKennedyGeospatial 2 жыл бұрын
Hi Aadil, you can measure infinite points when linking your S910 to and measuring straight to CAD.
@timd9430 2 жыл бұрын
I think MicroSurvey FieldGenius allows this too.
@johandelgado5463 3 жыл бұрын
NO ENTIENDO ME GUSTARIA QUE ESTE EN IDIOMA ESPAÑOL
@ArifulIslam-ot9sw 3 жыл бұрын
Is cad integration is possible in disto x4?
@CRKennedyGeospatial 2 жыл бұрын
Hi Ariful, CAD integration is only possible with the Leica Disto S910.
Shayter Andrey
Рет қаралды 70 М.
НГК | Оборудование для геодезии
Рет қаралды 1,7 М.
Dharni
Рет қаралды 151 МЛН
Leica DISTO™ X6 - How to measure Point-to-Point? Best measuring tool for inaccessible objects (2024)
Leica Geosystems AG
Рет қаралды 2,5 М.
Shayter Andrey
Рет қаралды 84 М.
Leica Geosystems AG
Рет қаралды 13 М.
Shayter Andrey
Рет қаралды 92 М.
Александр Мальков
Рет қаралды 2,9 МЛН
Sameer Gaming
Рет қаралды 6 МЛН
notebook-31
Рет қаралды 104 М.