Lenny Magill checks out our new Double Diamond PREMIUM barrels

No video

Lenny Magill checks out our new Double Diamond PREMIUM barrels

Рет қаралды 44,555

6 жыл бұрын

Our Double Diamond replacement barrels are some of the finest available in the aftermarket Glock barrel world. So what makes this one a PREMIUM barrel?
Lenny Magill is happy to explain the difference in this new video!
This is our Item #1011 and you can find it here: www.glockstore....

Пікірлер: 85

@bowhunter4489 6 жыл бұрын

Nice-looking Barrel !! Lenny I'm going on roughly 2300 rounds in between cleaning 😨.... my Glock is meant to get dirty LOL have a total of close to 9000 rounds in my 19gen3 think I just broken the gun in love my glocks!! Best tool I ever bought

@danemaui8259 4 жыл бұрын

When they cut the barrels the lines and ridges are so sharp, that literally when you tried to pull the slide back it felt like it was locked in place until it break free. That was just one end of the barrel. The other end, the sharp ridges is right above the chamber we're just as bad. I had to go out and buy a metal file, and literally filed down all of the sharp edges that were catching. Once the gun would shoot, receiver won't even go all the way back up to the barrel and was getting stuck on the ridges. My firing range has a gunsmith, I showed him, and he was pretty baffled. Not one, but two barrels like this. You'd have to shoot a good 10,000 rounds to try to grind that off the top, there's no way you could break it in even if you wanted to. After over an hour of filing down both barrels I got them to flow like THEY SHOULD on the slide. I'm very disappointed with the Glock shop. These barrels are cut specifically for my gun, yet don't fit it? The fact that they're not rounding these edges so the barrel works properly is unbelievable!!! I don't recommend purchasing these barrels whatsoever.

@Chris-km7rd 3 жыл бұрын

Mine came in yesterday, Gen 4 G23. Got the stainless and it looks really good. The GS and logo look good. Fits really good too, the standard double diamond barrel is nice and clean looking but this premium barrel is not to busy looking.

@futureprimitive7465 5 ай бұрын

How did it turn out for you?

@fit4duty724 23 күн бұрын

This barrel has definitely improved the accuracy of my old lady Glock 22 which is 30 years old , and it looks great and easy to clean. I can shoot the dot torture drill much better and I can run my hot reloads with no problems.

@Red-ji3je 4 жыл бұрын

No joke, you should totally do a few of these videos on April fools day with an asmr voice

@forgetyou4225 Жыл бұрын

Got one for my gen 3 27 and it won’t even rack and yes I know what I’m doing and I made sure it wasn’t just my mistake by throwing back on my oem barrel and it racks perfectly double diamond barrel won’t even go onto my frame!!!

@drjaye1962 6 жыл бұрын

Can you demo the new barrel in your shoot room thx that would b kewl, keep up the great work/vids

@wpck1761 4 жыл бұрын

Thank u gona up grade for sure!!

@backwoodscharlie8483 3 жыл бұрын

I bought two double D barreis from the Glock store I had problems with both never again

@speeddemon2152 6 жыл бұрын

I have the double diamond barrel for my Glock 19. Shot 300 rounds and now the finish is all scuffed up. Performance is good but finish not so much

@michellebernetti1371 3 жыл бұрын

What color finish did you have?

@speeddemon2152 3 жыл бұрын

@@michellebernetti1371 Stainless steel . I prefer True Precision barrels they hold up better.

@weedXD38 6 жыл бұрын

Will look into the 10 mm

@Superwazzledazzle Ай бұрын

I’m sold

@mechathanos5444 4 жыл бұрын

Please answer. I just got the gold one. Is the top supposed to chip a little. It not to bad. Just didn't think the gold would chip right away

@raftika1 4 жыл бұрын

damn really? is the metal itself chip or the paint chipped? for 280 none of that shouldve been chipped i feel like.

@mechathanos5444 4 жыл бұрын

@@raftika1 really. The paint chip.. you can see a silver line across the top. It should be all gold

@raftika1 4 жыл бұрын

Mecha Thanos oh okay so it’s a scratch not a chip? You say there’s a line going across it so I’m guessing your chip is a scratch? And no you definitely didn’t buy a gold barrel it’s just painted gold. I actually dm them on IG and they said “The gold is a titanium nitride coating which is extremely durable. Since both SS and Gold will hold up well I would choose the color you like best.” And then I asked if the gold is a better bet than and they responded with “While the SS barrel is sealed to prevent corrosion there would be an advantage to having a titanium nitride coating. Titanium Nitride is used for its durability with many machine parts, tools etc. It bonds directly with the metal, reduces friction and will be easier to maintain in the long run. Is it necessary, no. But will it serve a purpose and have benefits? Of course. If you additional questions come to mind, let me know!” So I hope your scratch/chip doesn’t corrode..

@DMo-yq2qq 2 жыл бұрын

Will I be able to shoot self Defense rounds through this barrel?

@one-mi7ei 6 жыл бұрын

Make stuff for the Glock gen5

@user-kf7kg3lf9w 6 жыл бұрын

It's crazy you're in California aren't the gun laws the worst there

@billybobjr7501 5 жыл бұрын

? ? You’re thinking of New York my guy

@jasoneric5969 4 жыл бұрын

Gun Laws are awful in California

@eastcoastcharlie602 3 жыл бұрын

@@billybobjr7501 The difference between California and New York are about the same as the differences between Stalin and Lennon! Both Libturd, Anti-Gun States!

@trumpie5399 2 жыл бұрын

If they would offer a premium Diamond for G20 I would go for that .

@Cliffhanger_MFC 6 жыл бұрын

How come you don’t have one for the G 33 Gen4?

@mikeogden5256 2 жыл бұрын

I want it

@TheManFromMA 2 жыл бұрын

I bought the complete pyramid slide and it was junk. It was suppose to be a drop in slide but it wouldn’t even slide. I called your bad customer service and they told be to deal with it after being on hold for 3 hours. Worst 500.00 I’ve ever spent.

@williammicou5757 3 жыл бұрын

I have a glock 20 gen 4 10mm, I'm somewhat new to this. Will any of these barrels allow 10mm and 40mm to be fired out of the same barrel.

@jarinorvanto4301 6 жыл бұрын

I'm not expert in the field, but relying the following statement upon some reading, practical experience and common sense: CNC-machined mechanics with very narrow tolerances allows very precise action. But the precision in turn depends on proper maintenance. The slighter the tolerance, the preciser the precision, the more it takes to maintain - in order to remain precise. Compare the imprecise but durable series of rifles by Kalashnikov, or the whole russian philosophy (or excuse in lack of precision, perhaps?) regarding mechanics; they work under any circumstance. The germans, or here the austrians, are probably the best manufacturers of serial production combining precision and durability.

@utet.4226 6 жыл бұрын

Hello, lookin' for a threaded barrel for the G34gen5. Seems no one makes them yet. Lookin'.

@geneellis217 6 жыл бұрын

Could you please make them 6 inches for 357 ported for those of us that want to customize Gene

@kingblu7881 6 жыл бұрын

Got it in tin?

@josephallevato7188 3 жыл бұрын

Mine arrives today for a G23

@Chris-km7rd 3 жыл бұрын

Have you installed it yet? Does it fit good?

@josephallevato7188 3 жыл бұрын

@@Chris-km7rd Fits perfectly!

@ericj6636 4 жыл бұрын

Did you change manufacturer? I just watched your last video and it said you were approached directly from the manufacturer of Lone Wolf who was also making Double Diamond for you direct allowing you to pass on savings to us. You said that they were sourced overseas.

@ACH91332 4 жыл бұрын

Good luck. This guy is the used car salesman of new gun parts. Sure he owns guns just like a car salesman owns cars but honestly all the info he knows is from other people or what he reads. He’s also going to tell you whatever you want to hear to get your money. Check out his BS vids where he tells you how the Military developed the AR-15 and how they basically appointed everything on it despite it actually being a civilian rifle designed by a civilian working for a civilian company which licensed then sold to a different company and was later finally adopted as the M16.

@coaltrain4423 Жыл бұрын

Do these barrels have fully supported chambers?

@trumpie5399 2 жыл бұрын

Why is this barrel not offered for the Glock 20 ?

@precisionmarksman5084 6 жыл бұрын

Would like to buy for both my 29&20 10MM , but it's not offered.

@theclimatechangeconspiracy 3 жыл бұрын

Is it rated 40 cal 155 grain +P 1300FPS JHP ammo?

@rubenscott3972 6 жыл бұрын

I want one

@kingishumble8939 5 жыл бұрын

will this Barrel fit the 19x ?

@bass-n-truth-inthestix9083 5 жыл бұрын

I thought the double diamond barrels were made in another country? That is what you said in a different video about the gs barrels. They are from the same manufacturer as lone wolf no? I'm confused unless that has changed and I didn't know.

@lifelibertyandguns889 5 жыл бұрын

The standard Double Diamond Barrels are made outside of U.S. by the same manufacturer as the Lone Wolf Barrels, but the Double Diamond Premium Barrels are made in the U.S. Also, if you notice the appearance of these two (2) types of barrels are different and they are also at different price points.

@bass-n-truth-inthestix9083 5 жыл бұрын

@@lifelibertyandguns889 thank you for clearing that up and yes I'm aware they look different and have difference in price. That just wasn't enough information for me to figure out if they had switched manufacturers. Or if they just had different barrels made elsewhere as is the case I now know. I was thinking... either I caught a lie. Or they switched manufacturers all together. Thank you again for letting me know what was up with with that.

@manuelsarti9558 5 жыл бұрын

Sorry to hear about your bad experience, and thank you for sharing. I want to convert my glock 22 into a 9mm and I am looking for options.

@porkchopspapi5757 4 жыл бұрын

@@lifelibertyandguns889 who makes lone wolf barrels?

@johnhoward7298 4 жыл бұрын

What state are they manufactured in ?

@darylragland1502 2 жыл бұрын

Glocks perfect barrel. Sold SEPARATELY

@bodbytodd 6 жыл бұрын

Does this new barrel come in size to fit my glock 30 .45?

@morgandewolfe 6 жыл бұрын

Nope no .45 acp barrels on the site.

@ericlaney384 6 жыл бұрын

Not impressed they don't come in 357 sig or 10 mm what the hell!

@50AE1313 5 жыл бұрын

I got mine in 357 sig this morning. Garbage!!! What a waste.

@johnhoward7298 4 жыл бұрын

@@50AE1313 Are You saying it's not everything ( or anything ) Mr McGill said it is ?

@vincentdivita7800 4 жыл бұрын

Im here bc i was thinking about 10mm, it's available now. Thinking about doing it for a conversion. Advertising no need for new extractor and all, so....

@monarch29balisongs 6 жыл бұрын

I like it.i hope all the other aluminum parts get a makeover too the other stuff looks so generic.

@hekkenschutz 6 жыл бұрын

Sigh... All this talk about performance and no video of it performing or targets with small groups

@danemaui8259 3 жыл бұрын

It's because you don't cut the barrels right when they would never demo it.

@danemaui8259 3 жыл бұрын

It's because they don't cut the barrels right, so if they were to demo it it would just malfunction

@backwoodscharlie8483 3 жыл бұрын

I purchased two double D barrels from the Glock store I had issues with both of them when I called the Glock store customer service he said did you use them I said yes he said I can't help you , you used them already. Will never buy from glock store again.

@manuelacevedo5150 3 жыл бұрын

Ok,,,Q?.say my glock,is a 17 g1st.2.3.4.5.dkes it matter wend perchersing a barrel

@50AE1313 5 жыл бұрын

I just got mine in today. GARBAGE ! THE BORE AND RIFLING ARE CHIPPED AND CRACKED . THIS IS HOW YOU DO BUSINESS LENNY? . TALKED TO TOM THIS MORNING AND HAD TO EMAIL PICTURES IN. I DON'T THINK I WILL DO FURTHER BUSINESS WITH YOU GUYS.

@serilus4life 6 жыл бұрын

pertie barrel.

@TheNLHAZE 2 жыл бұрын

The Great used car salesman!! Please guys look around before you buy from this company!!

@danemaui8259 4 жыл бұрын

Caution to anybody that is watching this. I bought two double diamond barrels, one threaded one not, for a Glock 21 gen 4. First things first. You cannot just drop these barrels into your gun and use them!!!

@Catgat37 3 жыл бұрын

Why??

@danemaui8259 3 жыл бұрын

They don't cut the barrels right. I commented again and gave him more in-depth explanation. It's in here somewhere, basically the barrel is cut so poorly that your gun cannot function correctly when you drop it into the gun. The slide catches on the barrel trying to drop below it and then when it comes back up it gets caught again. I filed these barrels down with a metal file for hours to get to the point where it wouldn't stick both directions. Imagine playing back your slide and when you go to pull it back it's locked in place and you have to unlock it to pull it back. Not free-flowing whatsoever! Malfunction after malfunction after malfunction.

@Catgat37 3 жыл бұрын

@@danemaui8259 Maybe someone just screwed up making yours. I have read other good reviews 🤷‍♂️

@danemaui8259 3 жыл бұрын

@@Catgat37 I bought two barrels three months apart. One was threaded one was not. They both were not cut right. Both designs specifically for the Glock 21.

@Catgat37 3 жыл бұрын

@@danemaui8259 well damn. Wish I would have known this before I ordered one 🤦‍♂️

@forgetyou4225 Жыл бұрын

This barrel is shitwater