Lesu 1/14 Backhoe First Impressions

Рет қаралды 118,595

Жыл бұрын

Welcome to our ,channel. This is a quick review and first Impression of the recently released Lesu Backhoe IN THE DIRT :) Appologies on the hand held as we never took the Tri-pod to Site. Please Enjoy and let us know your feedback.

Пікірлер: 79

@phoenixsui 6 ай бұрын

I always adjust my models in the settings of the controller unit. Most controllers have many options to set up curves or limit values to make things like steering inputs much better.

@rcplaytime Жыл бұрын

This is super cool,really like it 😃👍💪💪subscribed 👍👍😃

@christsitos8641 11 ай бұрын

Have you tried mixing in expo? That helps to smooth out controls.

@jjones1850 Жыл бұрын

Hello, I just got my Lesu Backhoe 3/9/2023 as a birthday gift to myself and you’re right about the steering. It’s horrible. It can hopefully be adjusted in the radio. The rest of the controls are pretty bad as well. LESU did not do a good job on setting up this model. I even had a glue fingerprint on the hood. I’m actually quite disappointed about the fingerprint. I’m not like you who works at a shop that sells these things. I paid for the model with my hard-earned money and have a model that does not perform well at all sucks. The glue fingerprint on the hood of the cab I think about it all the time. For the price I am a little disappointed but it's not a bad model just needs the user to put in some work. Well a month later and I have got the hang of it. Little adjusting on the radio will do the trick, OUTSTANDING model worth every bit of the price ! Will take away your need to buy a wheel loader and excavator. Way too much fun. A little car wax took out the fingerprint

@priverc Жыл бұрын

@jjones1850 I hear you. I hear there is a video that shows how to solve the problem with a radio tune. drop us a mail at info@priverc.com and when I get it ill try share it with you.

@Dara-xu1wp Жыл бұрын

so cool

@rcbarayaafis Жыл бұрын

Awesome

@CLAUDIOSRC9529 Жыл бұрын

great great video

@francoisolano2535 Жыл бұрын

im glad sa is getting hydraulic rc machines

@martinsatchell9117 Жыл бұрын

The steering is like that because that's how it would be in real life, steering is not self centering on anything like this or tractors etc.

@RodsRcStuff Жыл бұрын

I just got one. Need to slow down the settings. And I don’t like the non centering steering.

@kaugusteaftec Жыл бұрын

hello, beautiful video, are you still satisfied with this jewelry? thank you

@septa814 Жыл бұрын

Mantap bang 👍👍

@susie3702 Жыл бұрын

I would order one today if they can ship it today. I hate drooling over the pictures then having no luck finding one.

@priverc Жыл бұрын

Hi Poppy. We currently have available. can ship out in 2-3 days

@The-Warm-voice1359 Жыл бұрын

Hey buddy How you done i'm first time i watch your beautiful video Even i like to see this beautiful lady backhole work in the outdoor And Congrats 😊👍 so i want ask you about this machine any issuse with it like leak Or slow in the respones in the pump Or something like that Because i'm think about one like her to added to my fleet i hope you answer me And it helps me more Thx dude Cheers🍺

@priverc Жыл бұрын

Hi Friend. There were no leaks or sweating on the model during operation or afterwards that I could see. However the response on the Hydraulics is an interesting one as for me it was not responsive enough, then at times with different operations it was over responsive.

@RodsRcStuff Жыл бұрын

Also I can’t get the sound to work only the horn 🤷🏻‍♂️

@thatsmyrc Жыл бұрын

It seems finicky and jumpy comes with a price tag too. It’s a good looking machine though but I doubt I’ll ever get one.

@orhantellioglu1280 Жыл бұрын

Fiyati nedir ?

@Boomer3k Жыл бұрын

There is a very high possibility, that you'd get most of the jittery out just by simply tuning the settings on the PL18. The last jittery you'd also probably get out of the system by changing the Pump and drive ESC. At least that's my guess from former experience with Lesu machines.

@priverc 10 ай бұрын

Yes, fully agree however the aim of the first impression video is to show the performance of the machine straight out of the box for basic operation as setup by factory, in saying that this machine is slightly more complicated due to the fact adjusting pressures have to have precision knowledge due to the valves being shared between front and rear operation.

@priverc 10 ай бұрын

www.priverc.com/

@priverc 10 ай бұрын

It's a very technical machine but under experienced settings of the radio it could be a great machine.

@roshankhirsagar2687 6 ай бұрын

Bhaiya aapane JCB kahan se order Kiya Hai

@rctractor8755 Жыл бұрын

The machines is good, but you have to learn to control :) The forward-revers has to fast reaction, maybe you can set-up in the radio or in the ESC.

@priverc Жыл бұрын

Yes I totally Agree with you. However I wanted to show everyone how it was out of the box without any programing on this Initial Video.

@diego.barralamoedo.4021 Жыл бұрын

👍💯👍

@lesterstanislas5590 Жыл бұрын

I would love to have one but they cost $4,600 usd

@tomm9860 Жыл бұрын

Yes, that's way too much money for a toy. 1k would be enough for this toy. Not in my life time.

@priverc 10 ай бұрын

www.priverc.com/ We have a variation of products in different price brackets

@ianyoung2696 Жыл бұрын

Nice model shame the stab leg's on the rear H frame don't come down like a real digger.

@Trucker1970 Жыл бұрын

it has a sideshift boom and that’s how the “real” diggers are that have that option

@foxmeister06 Жыл бұрын

They do, if you look at 10:40 he has them lowered after he starts digging

@Sven-ErikLarsson Жыл бұрын

The rear legs is able to get down, I have see that before i other shows.

@thetrutha2177 Жыл бұрын

The stabilizing legs do move. He just doesn't know how the machine works. The fact that he doesn't realize anything machine which hydraulic steering doesn't self central shows his lack of knowledge.

@priverc 10 ай бұрын

Yes, this is true.

@bhupendraratre6454 2 ай бұрын

लेने के लिए किया करे कितना प्रारास हैं

@user-rw7fm4xh6j Жыл бұрын

Привет задней стрелой когда работал забыл лапы опустить

@rupesh163 Жыл бұрын

Ishq ki price kya hai

@markbarnett4435 8 ай бұрын

No way I would buy it 😮

@diprosla592 Жыл бұрын

where i can buy it safely withnout loosing money? from europe

@priverc Жыл бұрын

Good Day. You can Purchase from us

@amjadmansori1492 Жыл бұрын

@rupesh163 Жыл бұрын

Kahan se purchase Karen

@priverc 10 ай бұрын

www.priverc.com/

@stickbogart3657 Жыл бұрын

What you tell everybody how much it cost ? ❤❤❤

@priverc 10 ай бұрын

www.priverc.com/

@mikerotch4597 Жыл бұрын

Must be nice to throw cash around like that

@serunitvkids4475 Жыл бұрын

Hadir...salam kenal kk

@user-bp1df4us1s Жыл бұрын

HOW TO BUY THIS PRODUCT

@priverc 10 ай бұрын

www.priverc.com/

@MobKun-vy2kn Жыл бұрын

Can you ship to india

@priverc 10 ай бұрын

Yes! We ship worldwide!

@MalithSandaruwan-li1fq 28 күн бұрын

How to buy

@priverc 28 күн бұрын

On our website below... www.priverc.com/product/LESU-1-14-RTR-Livery-BL71-Backhoe-Loader-with-Hydraulics

@Malavika_desi_Youtuber Жыл бұрын

How much price. Indian money

@priverc 10 ай бұрын

www.priverc.com/

@robertwatt5731 Ай бұрын

D0 you sell the digers

@priverc Ай бұрын

Yes we do! www.priverc.com

@RamKumar-yj8em 2 ай бұрын

@jassijaat8175 Жыл бұрын

Price kya hai

@priverc 10 ай бұрын

www.priverc.com/

@eudaldroca1640 Жыл бұрын

I think you have to practise more...XD idk its a nice machine and looks dificult to control all movments simultaniusly

@priverc Жыл бұрын

Definitely needs more than 30 min practice I totally agree. It was just to show people as it comes out the box. It is very different to excavator controls and also pump responsiveness was unpredictable.