Do you have the parts list for this amp?

Nice clean build I'm on disability I enjoy CB radios I will get me a box like this some day right now I just run barefoot 73s god bless.

Awesome thanks for your video your the best entertainment on KZfaq always looking forward to your new videos.

Thanks for sharing the knowledge friend, is very interesting and fun to build such a very delicate piece. TX 77 waiving from the desert, click click.

I watched it all the way through and got my answers, Excellent informative video, Thanks!! I'll watch it 4 more times.

Thank you sir for such a detailed build. I learned a lot!

Really nice. Good neat job dude. I really enjoyed this. Im trying to learn how to work on mine. You are the first person ive seen that show start to finish. I actually think I could do this but it would be alot slower. Enjoyed to the max dude.

I wish someone sold these as a kit

Thank you for the great video.I hit all your buttons so we can stay connected. Stop in sometime for a coffee, Old Radio Night Live.

Thermal compound is designed to fill in the small crevices and holes between the two surfaces so the heat can transfer efficiently. i use a little dab then spread very thin with a razor blade. Great job brother!! Nice amp!!!!I always learn something from you ole timers!! New sub here!!

First of all, I watch all your build videos. Second, I want to learn more about building these amps. Could you do a more granular amp building video series? Right from the basics like parts used, why you use the parts you do, how to build the keying relay etc etc. From start to finish. With close ups of some of the finer details. I would really appreciate it! Keep up the good work. 73's

Impressive bud! GATEKEEPER Dropping by to show you some love! From one Southern boy to another....just guessing by that voice lol lol.

Do you have a parts list of whats needed and where to get them from? I really want to get into this

Can you set up a video on how to build the ferrite core windings for this Amp ? You are very intricate in your build of this Amp. Your the 1st to show almost every detail. Thanks

Thank you 💯 this very helpful 👏 can you do a little more detail on the peramp and relay circuit?

Wounder what the wattage is on them 10 ohm resistors. They look big. Looks pretty nice..

Parts list would be nice

Sir where do I get all the parts? do you supply this as a kit?

Great work!!! Pretty awesome!!! 102 Mobile Miami… 73’s

Can these be bought as a kit or you have to order every part of it individually?

Question: what kind of tool you use to punch the transistor’s holes? I’m interested on build one amplifier expecting 600w, for Ham Radio

nice video

Can I ask a favor can you do a list of everything you got okay I appreciate it because I like to try this build one myself and Alyssa things all right thank you I hope you can do this

Great Build !

Thanks for sharing Ramblinman! Hey this thing doesn't do SSB does it?

1.05K subscribers plus me. do you have videos on how to do all the stuff you already had premade? or a parts list? this is interesting

Those box's are clear coated i saw you buff so239 location however you have the ground tab on the 239 but not soldered to the board. That is a must do. Don't forget.

i would buy one his amps he does good work. do u have a wed site u sell them on or do u sell on ebay?

What mix are the transformer ferrites? 43, 61, 67? How many turns of what size wire on the input and output transformers? Awesome building video, I subscribed, I'll stay tuned on your channel. Thanks, Phil in Panama City, FL

Yep it will bend them if it is not spread on evenly. Thinner the layer the better it acts and a sink heat away from the device. If it the metallic kind be careful not to get it on any surfaces where it can short out the circuits as well. That's the way I do mine as well, I step torque the transistors in place to spread the thermal compound evenly. About 10-15 inch pounds is more than enough. What transistors are you suing in this build, Hg 2879s? I would mount the transformers on there and then get the + bias rail busbar mounted where I wanted it and then proceed on with the rest of the work. I see there is no resistor and cap with an electrolytic, along with a diode for the SSB so I take it this is for class C only. Too bad. I run SSB alot so I would need and on off switch for that as well. With the electrolytic for the relay delay as well. I do not understand why you don't go under the output transformers with the B+ power to the transistors. Like BBI does, makes for a cleaner looking job to me, if you go underneath with the power supply circuit.

I'd love to have a parts list for this four pill amplifier I'd like to build one myself but not sure what parts to buy

I really like the parts layout and the neatness of your builds. If I wanted to build one like this and Add Biasing so I could run AM and SSB how would I do that?. I know I would need to get a stable .6vdc approximately to the base of the transistors fed through wire wound on ferrites. How would I do this and is there a schematic for this amp? Thanks very much, Phil

Can't wait for tune up. Did you solder the ground lugs on the so239s

Good day for you. Those transistors don´t have bias on the base? or that amplifier is only for FM operation. 73´s

Where can i buy one

Do you, or would you sell these kits, and we can put them together ourselves with an instruction manual?

Where can we buy this kit ?

Another question...how’d you separate the solder on the pill 💊 strips between the transformers?

Good vid mate

Please explain how the hot bus and transistor bus are isolated from chassis ground. Thanks, Billy...Albq. N.M. 1 / 25 / 2023

Mr RADIOACTIVE would u be willing to get ma a parts list i would be willing to pay for your time..

Can you send me photos parts list of 4-pill i wanna learn how build one theses for my cobra 139.

Where to buy the kit ?

Thanks for the sharing mate. One question how do we do the bias on SSB? I am new on this hobby

where do you buy the copper board?

I just got an 8 pill biased for ssb. Can I talk am and leave my ssb switch on?

I see that your splitter coil has a 100 (I think) ohm resistor attached to it. On some 4 pill amps I notice that there is no resistor on the splitter coil on what looks otherwise about like the same circuit as your amp with the same board from ICA I suppose. So, was that a mistake on their part or what?

Can you help me get started on this?

Hello ramblin Man how can I contact you about purchasing one of your apps

Thanks for another great vidio. Which strain releaf did you use?

Could we get a parts list??

Would you sell a man a parts list and schematic

I am looking for a kit

Do fyou sell kits to build an amp?

Hey what happen how come no new videos

Good day rambling man. Nice video. Curious looking solder. If I am not mistaken it is the first time I have seen solder that looks like it has stripes or twirls. To the best of my knowledge I went to the American solder website and i did not see that solder in their catalogue. Do you know if it available from American solder? I am typing from across the peace bridge from Buffalo NY stranded in Fort Erie Canada!😊✖

Do you sell kits and instructions for these 4 pill builds ? Also where can a person find actual literature to learn these type of amplifier builds? Will wait for your response, Thanks

No videos lately?

What happened to the channel did he die

Will you sail a man that kid your fixing the build and let him build itself

Hello are you okay

What’s the value of the 2 capacitors on top of the input transformers?

No quiero amplicadores con toroides tienen armónicos no tiene filtro

Wish you built to sell

$$

Boooo :( All that and didnt get to see it fire up.. Psssst

I noticed all of your builds have female names what's up with that

Pay attention you tech nine technology can do this and you shut his channel down then why is this channel still running

Congratulations! You just built an irresponsible splatter-box. I guess you don't care about anybody but yourself. Where is your harmonic filter for the output? Do you not care about who you interfere with?

Can't he a word he is saying and pretty worthless video if you don't start by showing a circuit diagram, really have no idea what you have built other than it is a RF amp

Bro stop chewing up your finger nails and get some medication to get rid of that fungus that's on your fingers. Looks so sickening that I couldn't watch the video...smh